Samsung BD-JM63, BD-JM63C User Manual

BD-JM63 BD-JM63C

Blu-ray™ Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Safety Information

Warning

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE

PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from over heating, these slots and openings must never be blocked or covered.

- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

- Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

- Do not place vessels (vases etc.) containing water on this apparatus. A water spill can cause a fire or electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.

• Route power-supply cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the apparatus.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that important literature concerning operation and maintenance has been included with this product.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

• Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.

2 English

• Maintenance of Cabinet.

- Before connecting other components to this product, be sure to turn them off.

- If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

• Be sure to pull the power plug out of the outlet if the product is to remain unused or if you are leaving the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).

- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.

• Contact an authorized service center for information if you intend to install your product in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage to your product.

• Use only a properly grounded plug and wall outlet.

- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

• Do not allow children to hang on the product.

• Store the accessories (battery, etc.) in a location

safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.

• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service center.

• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the product or erase the printing on the product.

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

• Do not dispose of batteries in a fire.

• Do not plug multiple electric devices into the

same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• WARNING

- This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.

- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

FCC NOTE (for U.S.A)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the following measures.

• Reorienting or relocating the receiving antenna.

• Increasing the separation between the

equipment and receiver.

01 Safety Information

3 English

Safety Information

• Connecting this equipment to an outlet that is on a different circuit than the one the receiver is connected to.

• Consulting the dealer or an experienced radio/ TV technician for help.

This class B digital product meets all requirements of the Canadian Interference - Causing Equipment Regulations.

Note to CATV system installer

This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

CLASS 1 LASER product

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. (IEC 60825-1)

• THIS product UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN THE COVER. DO NOT REPAIR THE PRODUCT YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

| NOTE |

\If the Region number of a Blu-ray Disc/DVDs does not

correspond to the Region number of this product, the product cannot play the disc.

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

4 English

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

• Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

• Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

• A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

• Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.).

• Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the player's HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

• The player outputs 3D signals only through HDMI cable connected to the HDMI OUT port.

• The video resolution in 3D play mode is determined by the resolution of the original 3D video. You can not change the resolution.

• Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.

• You must use a high-speed HDMI cable for proper output of the 3D signal.

• Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46-inch screen, stay 138 inches (11.5 feet) from the screen.

• Place the 3D video screen at eye level for the best 3D picture.

• When the player is connected to some 3D devices, the 3D effect may not function properly.

• This player does not convert 2D content into 3D.

• "Blu-ray 3D" and "Blu-ray 3D" logo are trademarks of the Blu-ray Disc Association.

01 Safety Information

5 English

Contents

SAFETY INFORMATION

2 Warning

4 Precautions

4 Important Safety Instructions

5 Using the 3D function

GETTING STARTED

8 Accessories

9 Front Panel

9 Rear Panel

10 Remote Control

10 Tour of the Remote Control

CONNECTIONS

11 Connecting to a TV

12 Connecting to an Audio System

12 Method 1 Connecting to an HDMI

compatible AV receiver

12 Method 2 Connecting to an AV receiver

with a Digital Optical Cable

13 Connecting to a Network Router

13 Wired Network

13 Wireless Network

SETTINGS

14 The Initial Settings Procedure

14 The Home Screen

15 Accessing the Settings Screen

15 Buttons on the Remote Control Used for

the Settings Menu

16 Settings Menu Functions

16 Picture

17 Sound

17 Network

18 Smart Hub

18 System

20 Support

20 Networks and the Internet

20 Configuring Your Network Connection

23 Wi-Fi Direct

23 Upgrading Software

24 Update now

24 Auto Update

MEDIA PLAY

26 Playing Commercial Discs

26 Disc Storage & Management

26 Playing Photos, Videos, and Music

(Multimedia)

26 Playing Media Content Saved on a USB

Device

27 Playing Media Content Saved in a

Computer/Mobile Device

27 Playing a Disc with User Recorded

Content

29 Controlling Video Playback

29 Buttons on the Remote Control used for

Video Playback

29 Using the Settings Menu During Playback

31 Using the Sort by & Options Menus

6 English

31 Controlling Music Playback

31 Buttons on the Remote Control used for

Music Playback

32 Using the Options Menu During Playback

32 Using the Sort by & Options Menus on a

File Screen

33 Repeating Tracks on an Audio CD

33 Shuffling Tracks on an Audio CD

33 Creating a Playlist from an Audio CD

33 Ripping

34 Playing Photo Contents

34 Using the Tools Menu During Playback

35 Using the Sort by & Options Menus

36 Send files

36 Copying Videos, Music or Photos

36 Using the Send Function

NETWORK SERVICES

37 Creating a Samsung Account

38 Before Using Samsung Apps

38 Using Samsung Apps

38 The Samsung Apps Screen at a Glance

39 Starting an Application

40 Screen Mirroring

41 Using the Web Browser

41 Link Browsing and Pointer Browsing

41 The Control Panel at a Glance

43 Using the Setting Menu

44 Linking Your Internet Service Accounts

to the Product

44 BD-LIVE™

APPENDIX

45 Additional Information

45 Notes

47 Resolution according to the contents type

48 Digital Output Selection

49 Troubleshooting

52 Disc and Format Compatibility

52 Disc types and contents your product can

play

52 Disc types your product cannot play

53 Region Code

53 Logos of Discs the product can play

54 Supported Formats

57 Compliance and Compatibility Notice

58 Copy Protection

58 Network Service Disclaimer

59 Licenses

60 Specifications

Contents

7 English

Getting Started

Accessories

Check for the supplied accessories shown below.

Batteries for Remote Control (AAA Size)

(4301-000121)

HDMI cable (BD-JM63C only)

(BN39-01583A)

User Manual

(AK68-02612A)

SOURCE

VOL VOL

– +

VOL

–

SAMSUNG TV

DISC MENU

TITLE MENU

POPUP

SMART

HOME

REPEAT

HOME

APPS

HUB

INFOTOOLS

RETURN

EXIT

A B C D

SEARCH FULLSUBTITLE

AUDIO

SCREEN

PANDORA

DIGITAL

SUBTITLE

INPUT

Remote Control (AK59-00167A)

8 English

Front Panel

PLAY/PAUSE BUTTON

STOP BUTTON

OPEN/CLOSE BUTTON

POWER BUTTON

DISC TRAY

| NOTES |

\To upgrade the product's software through the USB HOST jack, you must use a USB memory stick.

\When the product displays the Blu-ray Disc's menu, you cannot start the movie by pressing the Play button on the product

or the remote control. To play the movie, you must select Play Movie or Start in the disc's menu, and then press the v button on the remote control.

DISPLAY

REMOTE CONTROL SENSOR

USB HOST

02 Getting Started

Rear Panel

HDMI OUT LAN

DIGITAL AUDIO OUT

9 English

Getting Started

Remote Control

Tour of the Remote Control

After setup, allows you to set the input

(This button is only available for Samsung TVs.)

Press to open and close the disc tray.

Press the number buttons to operate

Press to skip backwards or forwards.

Press to move to the Home screen.

These buttons are used both for menus

on the player and also several Blu-ray Disc

Use to access various audio functions on a

source on your TV.

Turn the player on and off.

options.

Use to enter the disc menu.

Press to stop a disc.

Press to use Apps.

Press to use the Tools menu.

Return to the previous menu.

functions.

Press to search contents.

disc.

SOURCE

VOL VOL

– +

VOL

SAMSUNG TV

DISC MENU

SMART

HOME

HUB

RETURN

A B C D

SEARCH FULLSUBTITLE

AUDIO

PANDORA

DIGITAL

SUBTITLE

VOL

–

TITLE MENU

POPUP

REPEAT

APPS

INFOTOOLS

EXIT

SCREEN

INPUT

Turn the TV on and off. (This button is only available for Samsung TVs.)

TV volume adjustment. (This button is only available for Samsung TVs.)

Use to enter the Popup menu/Title menu.

Press to search backwards or forwards.

Press to pause a disc.

Press to play a disc.

Allows you to repeat a title, chapter, track or disc.

Use to display the playback information.

Use to select menu items and change menu values.

Press to exit the menu.

Press to use the full screen function. During the Blu-ray Disc/DVDs playback, this button does not operate.

Press to switch the Blu-ray Disc/DVD's subtitle language.

Installing batteries

| NOTE |

\If the remote control does not operate properly:

- Check the polarity +/– of the batteries.

- Check if the batteries are drained.

- Check if the remote sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

| CAUTION |

\Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

10 English

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Audio Video

| NOTES |

\If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO OUT on the

product to an audio system to hear audio.

\An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

\Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

\When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for the first time, the

product automatically sets the HDMI output resolution to the highest supported by the TV.

\A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

\To view video in the HDMI 720p, 1080i, 1080p or 2160p output mode, you must use a high speed (category 2) HDMI cable.

\HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

03 Connections

11 English

Connections

Connecting to an Audio System

You can connect this product to an audio system using the methods illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI compatible AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver.

• Best quality (Recommended)

Method 2 Connecting to an AV receiver with a Digital Optical Cable

• Using a digital Optical cable (not supplied), connect the OPTICAL DIGITAL AUDIO OUT jack on the product to the DIGITAL OPTICAL IN jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output set to PCM.

AV Receiver

12 English

Method 2Method 1

AudioAudio

Connecting to a Network Router

Wireless Network

You can connect your product to your network router using one of the methods illustrated below.

To use the DLNA network functionality, you must connect your PC to your network as shown in the illustrations. The connection can be wired or wireless.

Wired Network

Broadband modem

(with integrated router)

Broadband

Router

Broadband

modem

| NOTES |

\Your router or your Internet Service Provider's policies

may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

\DSL users, please use a router to make a network

connection.

service

Broadband service

03 Connections

Wireless Router

Broadband

service

| NOTES |

\If your wireless router supports DHCP, this product can

use a DHCP or static IP address to connect to the wireless network.

\Set your wireless router to Infrastructure mode.

Ad-hoc mode is not supported.

\The product supports only the following wireless security

key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)

\Select a channel on the wireless router that is not

currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.

\If you select the Pure High-throughput (Greenfield)

802.11n mode and set the Encryption type on your router to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new Wi-Fi certification specifications.

\Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).

13 English

Settings

The Initial Settings Procedure

• The Home screen will not appear if you do not configure the initial settings.

• The OSD (On Screen Display) may change in this product after you upgrade the software version.

• The access steps may differ depending on the menu you selected.

After you have connected the product to your TV, turn on the TV and product. When you turn on the product the first time, the product's Initial Settings screen appears on the TV. The Initial Settings procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), and network configuration, and connect the player to the Internet. Follow the directions on the screen. When the initial setup is completed, a tutorial screen explaining how to use the Home menu will appear. To exit this screen, press the EXIT button on the remote.

| NOTES |

\If you skip Network Setup during the Initial Settings

procedure, you can configure your network settings later. See "Configuring Your Network Connection" on pages 20~23 for instructions.

\If you want to display the Initial Settings screen again and

make changes, select Settings > System > Setup in the Home screen or select the Reset option. (See page

20)

\If you want to use the Anynet+(HDMI-CEC) function,

please follow the instructions below.

1) Connect the product to an Anynet+(HDMI-CEC)-

compliant Samsung TV using an HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in both the

TV and the product.

3) Set the TV to the Initial Settings Procedure.

The Home Screen

1 2

MULTIMEDIAPLAY DISC

No Disc

RECOMMENDED MY APPS

WebBrowser

1 2 3

7 8 9

PLAY DISC : Lets you play photos, videos, or music

content from a Disc.

MULTIMEDIA : Lets you play photos, videos, or

music content from USB or mobile devices or PCs.

Search : Lets you search for content in Apps and

YouTube by entering corresponding search words.

Help : The tutorial screen explaining how to use the

Home menu will appear.

SAMSUNG APPS : Gives you access to various

applications you can download.

RECOMMENDED : Gives you direct access to

recommended applications.

MY APPS : Apps downloaded from MY APPS are

displayed.

2 3

Screen Mirroring : Lets you view the screen of

your smart phone or android tablet on a TV you

have connected to this product.

Settings : Opens the product's menu. In the menu, you can set various functions to suit your personal

preferences.

SAMSUNG APPS

Screen Mirroring

3 4

Settings

14 English

| NOTE |

VOL

–

SOURCE

DISC MENU

SMART

TITLE MENU

VOL VOL

POPUP

SAMSUNG TV

– +

HOME

REPEAT

If you leave the product in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

Accessing the Settings Screen

Buttons on the Remote Control Used for the Settings Menu

HOME

HUB

APPS

INFOTOOLS

04 Settings

1. Select Settings on the Home screen, and

then press v button. The Settings screen appears.

Settings

Picture

Sound

Network

Smart Hub

System

Support

Picture

UHD Output Auto

3D Settings

TV Aspect Ratio 16:9 Original

BD Wise Off

Resolution Auto

Movie Frame (24Fs) Auto

DVD 24Fs Conversion Off

2. To access the menus, sub-menus, and options on the Settings screen, please refer to the remote control illustration in the next column.

HOME button : Press to move to the Home screen.

RETURN button : Press to return to the previous

menu.

RETURN

(Enter) / DIRECTION buttons :

• Press ▲▼◄► to move the cursor or select an item.

• Press the v button to activate the currently selected item or confirm a setting.

EXIT button : Press to exit the current menu.

Detailed Function Information

Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the ▲▼◄► buttons to select the function, menu item, or option. The explanation will usually appear on the right side of the screen. A short description of each Settings function starts on the next page. Additional information on some of the functions is also in the Appendix of this manual.

EXIT

15 English

Settings

Settings Menu Functions

Picture

UHD Output

This option outputs HDMI video at UHD (Ultra High Definition) resolution. This is only available when Movie Frame is set to Auto.

| NOTES |

\To use this feature, you must connect the product to

a device that supports UHD resolution and you must have content that plays at 24Fs (film speed).

\This device cannot play UHD content. However, it can

scale up content resolution lower than Full HD to UHD.

\When you select UHD Output, only 2160 x 3840, 24

frame per second output is available.

3D Settings

Select whether to play a Blu-ray Disc with 3D content in 3D Mode.

If you move to the Home or SAMSUNG APPS

screen while in 3D mode, the product will switch to 2D mode automatically.

TV Aspect Ratio

Lets you adjust the output of the product to the screen size and screen format of your TV.

BD Wise

BD Wise is Samsung's latest inter-connectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the Blu-ray Disc/DVD.

Resolution

Set the output resolution of the HDMI video signal to BD Wise, Auto, 1080p, 1080i, 720p or 480p.

The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. Generally, the more lines, the higher quality.

Movie Frame (24Fs)

If the product is connected to a 24Fs compatible TV, setting the Movie Frame (24Fs) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality.

•

You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate.

•

Movie Frame is only available when the product is in the HDMI 1080i or 1080p output resolution modes.

DVD 24Fs Conversion

Converts DVD playback to 24 frames per second and outputs it via HDMI. This option is only available when Movie Frame (24Fs) is set to On.

| NOTE |

\This feature applies to NTSC discs only.

Fit Screen Size

Set the screen to the optimal size. (Available for Smart Hub and Screen Mirroring only.)

HDMI Color Format

Lets you set the color space format for the HDMI output so that it matches the capabilities of the connected device (TV, monitor, etc). The screen goes black momentarily after you have selected a format.

16 English

HDMI Deep Color

Lets you set the product to output HDMI video with Deep Color. Deep Color provides more accurate color reproduction with greater color depth.

Progressive Mode

Lets you improve picture quality when viewing DVDs.

Sound

Digital Output

Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For more details, see the digital output selection table on page 48.

PCM Downsampling

Lets you choose to have 96KHz PCM signals downsampled to 48KHz before they are outputted to an amplifier. Choose On if your amplifier or receiver is not compatible with a 96KHz signal.

Dynamic Range Control

Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio.

Auto : Automatically controls the dynamic range

of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control on for Dolby Digital and Dolby Digital Plus.

Off : Leaves the dynamic range uncompressed,

letting you hear the original sound.

On : Turns dynamic range control on for all three

Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the product downmix to normal stereo or to surround compatible stereo.

DTS Neo:6 Mode

You can enjoy multichannel sound via HDMI output from a 2 channel audio source.

Audio Sync

In some cases when the product is connected to a digital TV, the audio signal may not synchronize with the video signal. If this occurs, adjust the audio delay time to match the video signal.

•

You can set the audio delay time between 0 ms and 250 ms. Adjust it to the optimal setting.

| NOTE |

\The audio delay time you specify may not be exact

depending on the played content.

Network

Network Status

Lets you check the current network and Internet status.

Network Settings

Configure the network connection so you can enjoy various features such as Internet services or DLNA functionality, and perform Software Updates.

04 Settings

17 English

Settings

Wi-Fi Direct

Lets you connect a Wi-Fi Direct device to the product using a peer-to-pear network, without the need for a wireless router. Note that if the product is connected to a wireless network, it may be disconnected when you use Wi-Fi Direct.

| NOTE |

\Text files, such as files with a .TXT or .DOC extension,

will not display when you are using the Wi-Fi Direct function.

Multimedia Device Settings

Lets you control which devices on your network, such as smart phones and tablets, can share content with your product.

Device Name

Lets you input a name for the product that will identify it on your network.

BD-Live Settings

Set various BD-Live functions. BD-Live allows you to access extra features available on some Blu-ray Discs if you are connected to the Internet.

BD-Live Internet Connection : Lets you fully

allow, partly allow, or prohibit a BD-Live Internet connection.

BD Data Management : Manage BD data

downloaded from a BD-Live service or Blu-ray Disc.

Smart Hub

Caption

The function is used for VOD playback that supports closed caption display. Use it to change the displayed caption's font color and size.

| NOTES |

\This function does not work with VOD services that

don't support closed caption display.

\For certain VOD services, the function's settings may

not be applied.

Terms & Policy

You must review and agree to both the App Terms & Conditions and the privacy policy to use App services.

Reset Smart Hub

Resets all Smart Hub settings to their default settings. To use, you must enter the security PIN.

System

Setup

Lets you re-run the Initial Settings procedure.

Quick Start

Lets you set the product to turn on quickly by decreasing the boot time.

| NOTE |

\If this function is set to On, Standby power

consumption will be increased.

18 English

Language

You can select the language you prefer for the Onscreen menu, disc menu, audio, subtitles, etc.

•

The language you select for the disc menu, disc audio, or subtitles will only appear if it is supported on the disc.

Device Manager

You can connect a wireless USB keyboard or mouse to the USB port on the front of the product.

Keyboard Settings : Lets you configure a

wireless USB keyboard connected to the product.

| NOTE |

\You can use the keyboard only when a QWERTY

keyboard screen or window appears in the Web Browser.



Mouse Settings : Lets you configure a wireless USB mouse connected to the product. You can use the mouse in the product's menu and the Web Browser in the same way you use a mouse on your PC.

`To use a mouse with the product's menu:

1. Connect the USB mouse to the product.

2. Click the primary button you selected

in Mouse Settings. The Simple Menu appears.

3. Click the menu options you want.

| NOTES |

\Some USB HID keyboards and mice may not be

compatible with your product.

\Some HID keyboard keys may not work.

\Wired USB keyboards are not supported.

\Some applications may not be supported.

\If a wireless HID Keyboard does not operate because

of interference, move the keyboard closer to the product.

Security

The default security PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN. After you have accessed the security function for the first time, change the PIN using the Change PIN function.

BD Parental Rating : Prevents playback of

Blu-ray Discs with a rating equal to or above a specific age rating you have set unless you enter the PIN.

DVD Parental Rating : Prevents playback of

DVDs with a rating above a specific numerical rating you have set unless you enter the PIN.

Change PIN : Change the 4-digit PIN used to

access security functions.

`If you forget your PIN:

1. Remove any disc or USB storage device.

2. Press and hold the @ button on the top

panel for 5 seconds or more. The initialization message appears on the screen, and the power will turn off automatically. When you turn your product on again, all the settings will be reset.

General

You can change the options listed below to match your preferences.

Front Display : Change the brightness of the

front panel.

Time Zone : Select the time zone in which you

live.

Menu Transparency : Lets you adjust the

transparency of the menu box.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung product that have the Anynet+ feature and lets you control those products with one Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using an HDMI cable.

04 Settings

19 English

+ 43 hidden pages