Samsung BD-H6500-ZA User Manual

BD-H6500

Blu-ray™ Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

This Nanum Gothic Eco font is provided by NAVER.

Safety Information

Warning

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO

USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

The slots and openings in the cabinet and

•

in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

-Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

-Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

-Do not place vessels (vases etc.) containing water on this apparatus. A water spill can cause a fire or electric shock.

Do not expose this apparatus to rain or place

•

it near water (near a bathtub, washbowl, kitchen sink, or pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.

This apparatus uses batteries. In your

•

community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

Do not overload wall outlets, extension cords

•

or adaptors beyond their capacity, since this can result in fire or electric shock.

Route power-supply cords so that they

•

are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the apparatus.

QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that important literature concerning operation and maintenance has been included with this product.

To protect this apparatus from a lightning

•

storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

Before connecting the AC power cord to the

•

DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

Never insert anything metallic into the open

•

parts of this apparatus. Doing so may create a danger of electric shock.

To avoid electric shock, never touch the

•

inside of this apparatus. Only a qualified technician should open this apparatus.

Make sure to plug the power cord in until

•

it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

If this apparatus does not operate normally

•

- in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.

2 English

Maintenance of Cabinet.

•

-Before connecting other components to this product, be sure to turn them off.

-If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

Be sure to pull the power plug out of the

•

outlet if the product is to remain unused or if you are leaving the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).

-Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.

Contact an authorized service center for

•

information if you intend to install your product in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage of your product.

Use only a properly grounded plug and wall

•

outlet.

-An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

To turn this apparatus off completely, you

•

must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

Do not allow children to hang on the

•

product. Store the accessories (battery, etc.) in a

•

location safely out of the reach of children. Do not install the product in an unstable

•

location such as a shaky self, a slanted floor, or a location exposed to vibration.

Do not drop or strike the product. If the

•

product is damaged, disconnect the power cord and contact a service center.

To clean this apparatus, unplug the power

•

cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the product or erase the printing on the product.

Do not expose this apparatus to dripping

•

or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

Do not dispose of batteries in a fire.

•

Do not plug multiple electric devices into the

•

same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

There is danger of an explosion if you

•

replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

WARNING - TO PREVENT THE

•

SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

WARNING - This product contains chemicals

•

known to the State of California to cause cancer and reproductive toxicity.

FCC NOTE (for U.S.A)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.

•

Increase the separation between the

•

equipment and receiver.

01 Safety Information

3 English

Safety Information

Connect this equipment into an outlet on

•

a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/

•

TV technician for help. This class B digital product meets all

•

requirements of the Canadian Interference Causing Equipment Regulations.

Note to CATV system installer

This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

CLASS 1 LASER product

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

DANGER :

VISIBLE AND INVISIBLE LASER RADIATION

•

WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CAUTION :

CLASS 3B VISIBLE AND INVISIBLE LASER

•

RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. (IEC 60825-1)

THIS product UTILIZES A LASER. USE

•

OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN THE COVER. DO NOT REPAIR THE PRODUCT YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO L SER CLASE 1

|NOTE

If the Region number of a Blu-ray Disc/DVDs does

not correspond to the Region number of this product, the product cannot play the disc.

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

4 English

10. Protect the power cord from being walked

on or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

Some viewers may experience discomfort

•

while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

Watching 3D images for an extended period

•

of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

A responsible adult should frequently check

•

on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

Do not use the 3D Active Glasses for other

•

purposes (such as general eyeglasses, sunglasses, protective goggles, etc.).

Do not use the 3D function or 3D Active

•

Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

If you want to enjoy 3D content, connect a

•

3D device (3D compliant AV receiver or TV) to the player's HDMI OUT port using a highspeed HDMI cable. Put on 3D glasses before playing the 3D content.

The player outputs 3D signals only through

•

HDMI cable connected to the HDMI OUT port.

The video resolution in 3D play mode is

•

determined by the resolution of the original 3D video. You can not change the resolution.

Some functions such as BD Wise, screen size

•

adjustment, and resolution adjustment may not operate properly in 3D play mode.

You must use a high-speed HDMI cable for

•

proper output of the 3D signal. Stay at least three times the width of the

•

screen from the TV when watching 3D images. For example, if you have a 46-inch screen, stay 138 inches (11.5 feet) from the screen.

Place the 3D video screen at eye level for the

•

best 3D picture. When the player is connected to some 3D

•

devices, the 3D effect may not function properly.

This player does not convert 2D content into

•

3D. "Blu-ray 3D" and "Blu-ray 3D" logo are

•

trademarks of the Blu-ray Disc Association.

01 Safety Information

5 English

Safety InformatIon

Warning

2

Precautions

4

5

8

9

10

11

12

13

14

15

16

Important Safety Instructions

Using the 3D function

GettInG Started

Accessories Front Panel Rear Panel Remote Control

Tour of the Remote Control Setting the Remote Control to Operate

Your TV

ConneCtIonS

Connecting to a TV Connecting to an Audio System

Method 1 Connecting to an HDMI

supported AV receiver Method 2 Connecting to an AV receiver

with Dolby Digital or DTS decoder

Connecting to a Network Router

Wired Network Wireless Network

SettInGS

The Initial Settings Procedure The Home Screen Accessing the Settings Screen

Buttons on the Remote Control Used for the Settings Menu

Settings Menu Functions

17

18

19

21

24

25

Picture Sound Network Smart Hub System Support

Networks and the Internet

Configuring Your Network Connection Wi-Fi Direct

Upgrading Software

Update Now Auto Update

medIa Play

Playing Commercial Discs

27

28

29

30

32

Disc Storage & Management

Playing Photos, Videos, and Music (Multimedia)

Playing Media Content Saved on a USB Device

Playing Media Content Saved in a Computer/Mobile Device

Playing a Disc with User Recorded Content

Playing Media Content Saved in a Cloud Service

Samsung Link Controlling Video Playback

Buttons on the Remote Control used for Video Playback

Using the Settings Menu (During the Playback)

Using the View & Options Menus

6 English

Controlling Music Playback

32

33

34

35

36

37

Buttons on the Remote Control used for Music Playback

Using the Options Menu (During the Playback)

Using the View & Options Menus (On a file screen)

Repeating Tracks on an Audio CD Shuffling Tracks on an Audio CD Creating a Playlist from an Audio CD Ripping

Playing Photo Contents

Using the Tools Menu (During Playback) Using the View & Options Menus

Send files

Copying Videos, Music or Photos Using the Send Function

network ServICeS

Creating a Samsung Account

38

Before Using Apps

38

Using Movies & TV Shows

39

Using Apps

40

41

42

43

44

46

The Apps Screen at a Glance Starting an Application

Screen mirroring Using the Web Browser

Link Browsing and Pointer Browsing The Control Panel at a Glance Using the Setting Menu

Linking Your Internet Service Accounts to the Product

BD-LIVE™

aPPendIx

Additional Information

47

49

50

51

53

54

55

56

59

60

61

62

Notes Resolution according to the contents

type Digital Output Selection

Troubleshooting

Repairs

Disc and Format Compatibility

Disc types and contents your product can play

Disc types your product cannot play Region Code

Logos of Discs the product can play

Supported Formats

Compliance and Compatibility Notice Copy Protection Network Service Disclaimer Licenses Specifications

Contents

7 English

Getting Started

Accessories

Check for the supplied accessories shown below.

Batteries for Remote Control (AAA Size)

(4301-000115)

Quick Setup Guide

(AK68-02464A)

User Manual

(AK68-02465A)

SOURCE

VOL VOL

– +

VOL

–

DISC MENU

TITLE MENU

POPUP

SMART

HOME

REPEAT

HOME

APPS

HUB

INFOTOOLS

RETURN

EXIT

A B C D

SEARCH LIGHTSUBTITLE

AUDIO

PANDORA

DIGITAL

SUBTITLE

INPUT

Remote Control (AK59-00177B)

8 English

Front Panel

PLAY/PAUSE BUTTON

STOP BUTTON

OPEN/CLOSE BUTTON

POWER BUTTON

DISC TRAY

|NOTE

To upgrade the product's software through the USB Host jack, you must use a USB memory stick.

\When the product displays the Blu-ray Disc's menu, you cannot start the movie by pressing the Play button on

the product or the remote control. To play the movie, you must select Play Movie or Start in the disc's menu, and then press the v button on the remote control.

DISPLAY

REMOTE CONTROL SENSOR

USB HOST

02 Getting Started

Rear Panel

HDMI OUT LAN

DIGITAL AUDIO OUT

9 English

Getting Started

Remote Control

Tour of the Remote Control

After setup, allows you to set the input

Turn the product on and off.

Press to open and close the disc tray.

Press the number buttons to operate

Press to skip backwards or forwards.

Press to move to the Home screen.

Return to the previous menu.

These buttons are used both for menus

on the product and also several Blu-ray

Use to access various audio functions on

source on your TV.

options.

Use to enter the disc menu.

Press to stop a disc.

Press to use Apps.

Press to use the Tools menu.

Disc functions.

Press to search contents.

a disc.

SOURCE

VOL VOL

– +

VOL

DISC MENU

SMART

HOME

HUB

RETURN

A B C D

SEARCH LIGHTSUBTITLE

AUDIO

PANDORA

DIGITAL

SUBTITLE

VOL

–

TITLE MENU

POPUP

REPEAT

APPS

INFOTOOLS

EXIT

INPUT

Turn the TV on and off.

TV volume adjustment.

Use to enter the Popup menu/Title menu.

Press to search backwards or forwards.

Press to pause a disc.

Press to play a disc.

Allows you to repeat a title, chapter, track or disc.

Use to display the playback information.

Use to select menu items and change menu values.

Press to exit the menu.

Press to backlight the buttons on the remote control. This function is convenient when you are using the player at night or in a dark room. (If you turn the backlight on, battery usage time will be reduced.)

Press to switch the Blu-ray Disc/DVD's subtitle language.

Installing batteries

|NOTE

|CAUTION

10 English

If the remote control does not operate properly:

-Check the polarity +/– of the batteries.

-Check if the batteries are drained.

-Check if the remote sensor is blocked by obstacles.

-Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

Setting the Remote Control to Operate Your TV

You can control certain functions of your TV with this remote control.

Button Function

TV POWER Used to switch the television on and

off.

TV SOURCE Used to select an external source

connected to the TV.

TV VOL (+/–) Used to adjust the volume of the

television.

TV CH (,/.) Used to select the desired channel.

|NOTE

The functions listed above will not necessarily work

on all televisions. If you encounter problems, use the TV remote control.

To determine whether your television is compatible, follow the instructions below.

1. Switch your television on.

Point the remote control towards the television.

3. Press and hold the TV POWER button.

Then, using the number buttons, enter the two-figure code in the table to the right that corresponds to the brand of your television. If your television is compatible with the remote control, it will switch off. The remote is now programmed to operate the TV.

NOTE

If several codes are listed for your television brand,

try each one in turn until you find one that works.

\If you replace the remote control’s batteries, you

must set the brand code again.

TV Control Codes

Brand Code

TV POWER+01, +02,

SAMSUNG

BANG & OLUFSEN

BLAUPUNKT TV POWER+71

BRANDT TV POWER+73

BRIONVEGA TV POWER+57

CONTINENTAL

DAEWOO

EMERSON TV POWER+64

FERGUSON TV POWER+73

FORMENTI TV POWER+57

GRADIENTE TV POWER+70

GRUNDIG

IMPERIAL TV POWER+52

LOEWE OPTA

MAGNAVOX TV POWER+40

MITSUBISHI

NEWSAN TV POWER+68

+03, +04, +05, +06, +07, +08, +09

AIWA TV POWER+82

TV POWER+10, +11, +12, +13, +14, +15,

ANAM

+16, +17, +18

TV POWER+57

CGE TV POWER+52

TV POWER+75

EDISON

TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34

TV POWER+06, +49,

FINLUX

+57

FUJITSU TV POWER+84

TV POWER+49, +52, +71

TV POWER+60, +72,

HITACHI

+73, +75

TV POWER+61, +79

JVC

TV POWER+06, +19,

+20, +21, +22, +78

LOEWE

TV POWER+06, +69

TV POWER+06, +57

METZ TV POWER+57

TV POWER+06, +48, +62, +65

MIVAR

TV POWER+52, +77

NEC TV POWER+83

Brand Code

NOBLEX TV POWER+66

NOKIA TV POWER+74

NORDMENDE

PANASONIC

PHONOLA

PIONEER

RADIOLA

RADIOMARELLI

SALORA TV POWER+74

SCHNEIDER TV POWER+06

SIEMENS TV POWER+71

SINUDYNE TV POWER+57

TELEAVA TV POWER+73

TELEFUNKEN

THOMSON

THOMSON ASIA TV POWER+80, +81

TOSHIBA

TV POWER+72, +73, +75

TV POWER+13, +53, +54, +74, +75

TV POWER+06, +55,

PHILIPS

+56, +57

TV POWER+06, +56, +57

TV POWER+58, +59, +73, +74

TV POWER+06, +56

TV POWER+57

RCA

TV POWER+45, +46

REX TV POWER+74

TV POWER+57, +72,

SABA

+73, +74, +75

TV POWER+41, +42,

SANYO

+43, +44, +48

SELECO TV POWER+74

TV POWER+36, +37,

SHARP

+38, +39, +48

SINGER TV POWER+57

SONY

TV POWER+35, +48

TV POWER+67, +73, +75, +76

TV POWER+72, +73, +75

TV POWER+47, +48, +49, +50, +51, +52

WEGA TV POWER+57

YOKO TV POWER+06

ZENITH

TV POWER+63

02 Getting Started

11 English

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

-Do not connect the power cord to the wall outlet until you have made all the other connections.

-When you change the connections, turn off all devices before you start.

Audio Video

|NOTE

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO

OUT on the product to an audio system to hear audio.

\An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable. \Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. \When you connect the product to your TV using the HDMI cable or to a new TV, and then turn it on for the first

time, the product automatically sets the HDMI output resolution to the highest supported by the TV. \A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu. \To view video in the HDMI 720p,1080i,1080p or 2160p output mode, you must use a High speed (category 2)

HDMI cable. \HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the

screen.

12 English

Connecting to an Audio System

You can connect this product to the audio system using the methods illustrated below.

-Do not connect the power cord to the wall outlet until you have made all the other connections.

-When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI supported AV receiver

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to

•

the HDMI IN jack on your receiver. Best quality (Recommended)

•

Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder

Using a digital Optical cable (not supplied), connect the OPTICAL DIGITAL AUDIO OUT jack on

•

the product to the DIGITAL OPTICAL IN jack of the receiver. Good quality

•

You will hear sound only through the front two speakers with Digital Output set to PCM.

•

Method 2Method 1

AudioAudio

03 Connections

13 English

Connections

Connecting to a Network Router

You can connect your product to your network router using one of the methods illustrated below.

To use the AllShare network functionality, you must connect your PC to your network as shown in the illustrations. The connection can be wired or wireless.

Wired Network

Broadband modem

(with integrated router)

Broadband

Router

Broadband

modem

|NOTE

Your router or your Internet Service Provider's

policies may prevent the product from accessing

Samsung's software update server. If this occurs,

contact your Internet Service Provider (ISP) for more

information. \DSL users, please use a router to make a network

connection.

service

Broadband service

Wireless Network

Wireless Router

Broadband

service

|NOTE

If your wireless router supports DHCP, this product

can use a DHCP or static IP address to connect to the wireless network.

\Set your wireless router to Infrastructure mode. Ad-

hoc mode is not supported.

\The product supports only the following wireless

security key protocols:

-WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)

\Select a channel on the wireless router that is not

currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.

\If you select the Pure High-throughput (Greenfield)

802.11n mode and set the Encryption type on your router to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new Wi-Fi certification specifications.

\Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).

14 English

Settings

The Initial Settings Procedure

The Home screen will not appear if you do not

•

configure the initial settings. The OSD (On Screen Display) may change in this

•

product after you upgrade the software version. The access steps may differ depending on the

•

menu you selected.

After you have connected the product to your TV, turn on the TV and product. When you turn on the product the first time, the product's Initial Settings screen appears on the TV. The Initial Settings procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), and network configuration, and connect the player to the Internet. For complete Initial Settings instructions, see the Quick Setup Guide.

NOTE

If you skip Network Setup during the Initial Settings

procedure, you can configure your network settings later. See "Configuring Your Network Connection" on pages 21~24 for instructions.

\If you want to display the Initial Settings screen

again and make changes, select Settings > System > Setup in the Home screen or select the Reset option. (See pages 19 or 21)

\If you want to use an Anynet+(HDMI-CEC) function,

please follow the instructions below.

1) Connect the product to an Anynet+(HDMI-CEC)-

compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in

both the TV and the product.

3) Set the TV to the Initial Settings Procedure.

The Home Screen

1 2 3 6

PLAY DISC MOVIES & TV SHOWS MULTIMEDIA

No Disc

7 8 9

WebBrowser

2 3

PLAY DISC : Lets you play photos, videos, or

music content from Disc.

4 5 6

Screen Mirroring Settings

MOVIES & TV SHOWS : Lets you view Movies

and TV Shows from the Internet.

|NOTE |

\Depending on your country, this menu

function may not be supported.

MULTIMEDIA :

music content from USB or mobile devices, or PCs.

Lets you play photos, videos, or

Lets you log in with your Samsung account.

Search : Lets you search for contents in Movies and TV Shows, Apps and YouTube by entering

corresponding search words.

APPS : Gives you access to various applications

you can download.

My Apps : Apps downloaded from My Apps

are displayed.

Screen Mirroring : Lets you view the screen of your smart phone or android tablet on a TV

you have connected to this product.

Settings : Opens the product's menu. In the menu can set various functions to suit your

personal preferences.

4 5

APPS

04 Settings

|NOTE |

\If you leave the product in the stop mode for more than

15 English

5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

Settings

VOL

–

SOURCE

DISC MENU

SMART

TITLE MENU

VOL VOL

POPUP

SAMSUNG TV

– +

HOME

REPEAT

Accessing the Settings Screen

1. Select Settings on the Home screen, and

then press v button. The Settings screen appears.

Settings

Picture

Sound

Network

Smart Hub

System

Support

To access the menus, sub-menus, and

Picture

UHD Output Auto

3D Settings

TV Aspect Ratio 16:9 Original

BD Wise Off

Resolution Auto

Movie Frame (24Fs) Auto

DVD 24Fs Conversion Off

options on the Settings screen, please refer to the remote control illustration below.

Buttons on the Remote Control Used for the Settings Menu

HOME

HUB

APPS

INFOTOOLS

Detailed Function Information

Each Settings function, menu item, and individual option is explained in detail onscreen. To view an explanation, use the ▲▼◀▶ buttons to select the function, menu item, or option. The explanation will usually appear on the right side of the screen. A short description of each Settings function starts on the next page. Additional information on some of the functions is also in the Appendix of this manual.

2 4

HOME button : Press to move to the Home

screen.

RETURN button : Press to return to the previous

menu.

•

EXIT button : Press to exit the current menu.

RETURN

(Enter) / DIRECTION buttons :

Press ▲▼◀▶ to move the cursor or select an item.

Press the v button to activate the currently selected item or confirm a setting.

EXIT

16 English

Settings Menu Functions

Picture

UHD Output

This option outputs HDMI video at UHD (Ultra High Definition) resolution. This is only available when Movie Frame is set to Auto.

|NOTE

To use this feature, you must connect the product

to a device that supports UHD resolution and you must have content that plays at 24Fs (film speed).

\This device cannot play UHD contents However

contents with resolution lower than Full HD can be up-scaled to UHD.

\For UHD resolution output, only 2160*3840 24

frame rate output is available.

3D Settings

Select whether to play a Blu-ray Disc with 3D contents in 3D Mode.

If you move to the Home or Apps screen





while in 3D mode, the product will switch to 2D mode automatically.

TV Aspect Ratio

Lets you adjust the output of the product to the screen size and screen format of your TV.

BD Wise

BD Wise is Samsung's latest inter-connectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the Blu-ray Disc/DVD.

Resolution

Set the output resolution of the HDMI video signal to BD Wise, Auto, 1080p, 1080i, 720p or 480p.

The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. Generally, the more lines, the higher quality.

Movie Frame (24Fs)

If the product is connected to a 24Fs compatible TV, setting the Movie Frame (24Fs) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality.

You can enjoy the Movie Frame (24Fs)

•

feature only on a TV supporting this frame rate.

Movie Frame is only available when the

•

product is in the HDMI 1080i or 1080p output resolution modes.

DVD 24Fs Conversion

Converts DVD playback to 24 frames per second and outputs it via HDMI. This option is only available when Movie Frame (24Fs) is set to on.

Fit Screen Size

Set the screen to the optimal size. (Apply Smart Hub, Screen Mirroring only)

HDMI Color Format

Lets you set the color space format for the HDMI output so that it matches the capabilities of the connected device (TV, monitor, etc). The screen goes black momentarily after you have selected a format.

HDMI Deep Color

Lets you set the product to output HDMI video with Deep Color. Deep Color provides more accurate color reproduction with greater color depth.

Progressive Mode

Lets you improve picture quality when viewing DVDs.

04 Settings

17 English

Settings

Sound

Digital Output

Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For more details, see the digital output selection table on page 50.

PCM Downsampling

Lets you choose to have 96Khz PCM signals downsampled to 48Khz before they are outputted to an amplifier. Choose On if your amplifier or receiver is not compatible with a 96Khz signal.

Dynamic Range Control

Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio.

Auto : Automatically controls the dynamic





range of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control on for Dolby Digital and Dolby Digital Plus.

Off : Leaves the dynamic range





uncompressed, letting you hear the original sound.

On : Turns dynamic range control on for all





three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the product downmix to normal stereo or to surround compatible stereo.

DTS Neo:6 Mode

You can enjoy multichannel sound via HDMI output from a 2 channel audio source.

Audio Sync

In some cases when the product is connected to a digital TV, the audio signal may not synchronize with the video signal. If this occurs, adjust the audio delay time to match the video signal.

You can set the audio delay time between 0

•

msec and 250 msec. Adjust it to the optimal setting.

|NOTE

The audio delay time you specify may not be

exact depending on the played content.

Network

Network Status

Lets you check the current network and Internet status.

Network Settings

Configure the network connection so you can enjoy various features such as Internet services or AllShare functionality, and perform Software Updates.

Wi-Fi Direct

Lets you connect a Wi-Fi Direct device to the product using a peer-to-pear network, without the need for a wireless router. Note that if the product is connected to a wireless network, it may be disconnected when you use Wi-Fi Direct.

|NOTE

Text files, such as files with a .TXT or .DOC

extension, will not display when you are using the

Wi-Fi Direct function.

Multimedia Device Settings

Lets you control which devices on your network, such as smart phones and tablets, can share content with your product.

18 English

Device Name

Lets you input a name for the product that will identify it on your networks.

BD-Live Settings

Set various BD-Live functions. BD-Live allows you to access extra features available on some Blu-ray Discs if you are connected to the Internet.

BD-Live Internet Connection : Lets you fully





allow, partly allow, or prohibit a BD-Live Internet connection.

BD Data Management :





downloaded from a BD-Live service or Blu-ray Disc.

Manage BD data

Smart Hub

Apps Settings

Lets you configure App notification settings and view basic info about your Apps.

Push Notification Settings : Receive





notifications from selected services. Properties : See basic info about Apps.





VOD Rating Lock

Lets you lock access to Video on Demand (VOD) content based on its rating. To use, you must enter the security PIN.

|NOTE

Depending on your country, this menu function

may not be supported.

Caption

For use with VOD playback that supports closed captions. Lets you change the displayed caption's font color and size.

|NOTE

The Caption function does not work with VOD

services that do not support closed captions.

Terms & Policy

You must review and agree to both the App Terms & Conditions and the privacy policy to use App services.

Samsung account Terms and Conditions, Privacy Policy

You can view and agree to the terms or privacy policy for your Samsung account and a variety of other services.

Reset Smart Hub

Resets all Smart Hub settings to their default settings. To use, you must enter the security PIN.

System

Setup

Lets you re-run the Initial Settings procedure. See the Quick Setup Guide for details.

Quick Start

Lets you set the product to turn on quickly by decreasing the boot time.

|NOTE

If this function is set to On, Standby power

consumption will be increased.

04 Settings

19 English

Settings

Language

You can select the language you prefer for the On-screen menu, disc menu, audio, subtitles, etc.

The language you select for the disc menu,

•

disc audio, or subtitles will only appear if it is supported on the disc.

Device Manager

You can connect a wireless USB keyboard or mouse to the USB port on the front of the product.

Keyboard Settings : Lets you configure a





wireless USB keyboard connected to the product.

|NOTE

You can use the keyboard only when a QWERTY

keyboard screen or window appears in the Web Browser.

Mouse Settings : Lets you configure a





wireless USB mouse connected to the product. You can use the mouse in the product's menu and the Web Browser in the same way you use a mouse on your PC.

`To use a mouse with the product's menu:

1. Connect the USB mouse to the product.

2. Click the primary button you selected

in Mouse Settings. The Simple Menu appears.

3. Click the menu options you want.

NOTE

Some USB HID keyboards and mice may not be

compatible with your product. \Some HID keyboard keys may not work. \Wired USB keyboards are not supported. \Some applications may not be supported. \If a wireless HID Keyboard does not operate

because of interference, move the keyboard

closer to the product.

Security

The default security PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN. After you have accessed the security function for the first time, change the PIN using the Change PIN function.

BD Parental Rating : Prevents playback of





Blu-ray Discs with a rating equal to or above a specific age rating you have set unless you enter the PIN.

DVD Parental Rating : Prevents playback





of DVDs with a rating above a specific numerical rating you have set unless you enter the PIN.

Change PIN : Change the 4-digit PIN used to





access security functions.

`If you forget your PIN:

1. Remove any disc or USB storage device.

2. Press and hold the @ button on the top

panel for 5 seconds or more. The initialization message appears on the screen, and the power will turn off automatically. When you turn your product on again, all the settings will be reset.

General

You can change the options listed below to match your preferences.

Front Display : Change the brightness of the





front panel. Time Zone : Select the time zone in which





you live. Menu Transparency : Lets you adjust the





transparency of the menu box.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung product that have the Anynet+ feature and lets you control those products with one Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using an HDMI cable.

20 English

+ 44 hidden pages