Samsung AZ18FAMEB/XCH User Manual

OWNER’S INSTRUCTIONS

WINDOW-TYPE

ROOM AIR CONDITIONER

(Cool and Heat)

E R

DB98-08410A(3)

AZ09FATEA AZ12FADEA AZ18FAMEA/EB AZ22FAMEA AZT18FAMEA AZT24FAMEA

AZ09AATEA AZ12AADEA AZ18AAMEA/EB AZ22AAMEA AZT18AAMEA AZT24AAMEA

E-2

Safety Precautions

The following safety precautions must be taken when using your air conditioner.

Users of this product are cautioned not to attempt repair of this product at their own

discretion. Instead, they are requested to directly contact a designated

service

center or the outlet at which the product was purchased.

Never spill any kind of liquid into the unit. Should this happen, unplug or main switch

off the unit and contact an authorized service center.

Do not insert anything between the air outlet blades because the inner fan may be

damaged and could cause injury. Keep children away from the unit.

Do not place any obstacles in front of the unit.

Do not spray liquid of any kind into the indoor unit. Should this happen, switch off the

breaker used for your air conditioner and contact your installation specialist. Make sure that the unit is correctly ventilated at all times: Do

not place clothing or other materials over it.

If the wireless remote control will not be used for a long time, remove the batteries.

(If applicable)

When using a wireless remote control, the distance should not be more than 7 meters

from the air conditioner. (If applicable)

WARNING

DURING OPERATION

Risk of electric shock. • Can cause injury or death. • Disconnect all remote

electric power supplies before servicing, installing or cleaning.

• This must be done by the manufacturer or its service agent or a similar qualified

person in order to avoid a hazard.

ISPOSING OF THE UNIT

OTHERS

The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring,earthing and safety regulations.

If the power cord is damaged in any way, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

This device must be installed according to the national electrical rules.

The appliance must be installation that the plug should be easily accessible after installation.

If the fuse on PC board is broken please change it with the type of T 3.15A 250V.

The breaker of the air conditioner should be all-pole switch; and the distance between its two contacts should be no less than 3.5mm. Such means for disconnection must be incorporation in the fixed wiring.

Before throwing out the device, it is necessary to pull back the battery cells and get

When you need to dispose of the unit, consult your dealer. If pipes are removed incorrectl injur

Please recycle or dispose of the packaging material for this product in an environmentally

Never store or ship the air conditioner upside down or sideways to avoid damage to

The appliance is not intended for use by young children or infirm persons without supervision: with

Max current is measured according to IEC standard for safety and current is measured

rid of them safely for recycling reasons.

y, refrigerant may blow out and come into contact with your skin,causing

y. Releasing refrigerant into the atmosphere also damages the environments.

responsible manner.

the compressor.

Young children should be supervised to ensure that they do not play

the appliance.

according to ISO standard for energy efficiency.

Contents

◆ P

REPARING YOUR AIR CONDITIONER

■ Safety Precautions ......................................................................................... 2

■ Air Conditioning Unit - Main Parts, Buttons and Display ................................ 4

■ Remote Control Buttons ................................................................................. 5

■ Getting Started ............................................................................................... 6

■ Inserting the Remote Control Batteries .......................................................... 7

◆ OPERATING YOUR AIR CONDITIONER

■ Cooling Your Room ......................................................................................... 8

■ Heating Your Room ......................................................................................... 9

■ Airing Y our Room ............................................................................................ 10

■ Adjusting the Air Flow Direction Horizontally ................................................. 11

■ Adjusting the Air Flow Direction Vertically ...................................................... 11

◆ PROGRAMMING YOUR AIR CONDITIONER

■ Setting the On Timer ...................................................................................... 12

■ Setting the Off Timer ...................................................................................... 13

■ Setting the Sleep Timer .................................................................................. 14

◆ RECOMMENDATIONS FOR USE

■ Operating Recommendation ........................................................................... 15

■ Temperature and Humidity Ranges ................................................................ 16

■ Cleaning Your Air Conditioner ......................................................................... 17

■ Solving Common Problems ............................................................................ 19

■ Technical Specifications ................................................................................. 19

◆ M

ETHOD OF I

NSTALLATION ..................................................................................... 20

E-3

CCCCAAAAUUUUTTTTIIIIOOOONN

The maximum permissible system impedance at the power junction box is 0.27 ohms. Usually, the maximum permissible mains impedance will not be exceeded when the branch to the power outlet is fed from a junction box with a rated current of 32A.

AZ18✴✴

" The high inrush current of the starting compressor motor can have adverse effects to the operation of other equipment under unfavorable mains conditions.This equipment does not comply with the relevant technical standards for the limitation of voltage fluctuations and flicker." Before connecting this equipment to the power supply system, please report to your supply authority and obtain the consent. Do not connect other electric appliances to the same supply lines.

Air Conditioning Unit - Main Parts, Buttons and Display

Air inlet (inside)

Air filter

(The air filter is

located inside)

Inner air flow blades (right/left orientation)

Air outlet Outer air flow blades

(up/down orientation)

Air inlet (Outside)

Ventilation lever

Power plug (The type of the power

plug may differ according to the type of local power supply.)

Fan speed indicators

(LOW, MED, HIGH)

Temperature/Timer

settings

Temperature adjustment

buttons

Operating mode indicators

(COOL, FAN, HEAT)

Remote Control sensor

Air flow blade swing button

Fan speed adjustment

button

Air flow blade swing indicator

Sleep timer setting button Timer indicator

Deice indicator

ON/OFF button

Operating mode selection button(COOL, FAN, HEAT)

Timer setting button

❄ The design and shape are subject to

change according to the model.

E-4

Remote Control - Buttons

Temperature adjustment buttons

Fan speed adjustment buttons

ON/OFF button

E-5

Timer setting button

Sleep timer setting button

Operating mode

selection buttons

Air flow blade swing button

Getting Started

You have just purchased a window-type room air conditioner and it has been installed by your installation specialist.

Your Owner’s Instructions contain valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s functions.

This Owner’s Instructions is just for using your air conditioner correctly. Thus, the illustrations shown in this manual may not exactly match your air conditioners.

The booklet is organized as follows.

◆ The following figures are shown on pages 4 and 5:

- Air conditioning unit (main parts, buttons and display)

- Remote control (buttons)

They will help you find the buttons and understand the symbols displayed.

◆ In the main part of the document, you will find a series of step-by-step procedures for each

function available.

The illustrations in the step-by-step procedures use four different symbols:

Moreover, applicable, wherever the illustrations show the positions of the buttons on both the remote control and the unit itself.

For the... The illustrations have a...

Remote control Gray background.

Example:

Unit itself White background.

Example:

PRESS PUSH IMPORTANT NOTE

☛

➢

E-6

Inserting the Remote Control Batteries

You must insert or replace the remote control batteries when:

◆ You purchase the air conditioner

◆ The remote control does not work correctly

☛

Use two AAA, LR03 1.5 V batteries.Do not use old batteries or different kinds of batteries together.

Batteries may be completely discharged after 12 months, even if they have not actually been used.

1 Push the battery cover on the rear of the remote control with your thumb in

the direction of the arrow and remove it.

Insert the two batteries, taking care to respect the polarities:

◆ + on the batter y with + on the remote control

◆ – on the batter y with – on the remote control

Close the cover by sliding it back until it clicks into place. Result

You can control all the functions on your air conditioning unit directly from your seat, using the remote control.

E-7

+ 15 hidden pages