Samsung AQV09J user manual
ENGLISH
INSTALLATION
MANUAL
AQV09J
AQV12J Series
AQV18J Series
AQV24J Series
Series
ESPAÑOLFRANÇAIS
DB98-27556A(1)
SE F
Split - type Air Conditioner
(Cooling and Heating)
E-2
Contents
PREPARING FOR INSTALLATION
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Choosing the Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
INSTALLING THE AIR CONDITIONER
Fixing the Installation Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Purging the Indoor Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing and Connecting the Assembly Pipe of the Indoor Unit . . . . 8
Cutting or Extending the Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing and Connecting the Drain Hose of the Indoor Unit . . . . . . 10
Changing Direction of the Drain Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing and Connecting the Drain Hose of the Outdoor Unit . . . . . 11
Connecting the Assembly Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
COMPLETING THE INSTALLATION
Purging the Connected Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Performing the Gas Leak Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Fixing the Indoor Unit in Place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Fixing the Outdoor Unit in Place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Final Check and Trial Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Providing Information for User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
E-3
ENGLISH
Safety Precautions
Keep this installation manual together with the user’s manual in a handy place so that you can find it whenever
you need to see it after reading this manual thoroughly.
Make sure to read the following safety precautions carefully before installation.
Make sure to observe the cautions specified in this manual.
Conduct a test run of the unit after installation and then explain all system functions to the owner.
The indications and meanings are as shown below.
WARNING
Installation must be carried
out by a qualified installer.
Installers are required to read
the general information
carefully for safety.
Do not put the unit near
dangerous substances to
prevent fire, explosion or
injury and do not expose
the unit to direct sunlight.
Do not install the unit by
yourself (owners).
Incorrect installation of the
unit could cause injury due
to fire, electric shock and
water leakage or from the
unit falling. Consult a dealer
or a qualified installer.
Install the unit in a place
where it is strong enough
to hold the product weight.
When installed in place
where it is not strong
enough to withhold the
product weight, the unit
could fall and cause injury.
This indicates the possibility of serious injury or death.
Use the specified wires to
connect the indoor and
outdoor units securely and
attach the wires firmly to the
terminal block connecting
sections so that the pressure
is not applied to the sections.
Inappropriate connection and
fixing could cause fire.
Avoid the use of an
extension cord and do not
share the power outlet with
other appliances. Incomplete
connection, defective
insulation or exceeding the
permissible current may cause
electric shock or fire.
Make sure that the refrigerant
gas does not leak after
completing the installation.
If the refrigerant gas of
the indoor unit leaks and
comes into contact with the
fan heater, space heater or
stove, harmful substances
will be generated.
Perform the installation
securely referring to
the installation manual.
Incomplete installation
could cause personal injury
due to fire, electric shock
and water leakage or from
the unit falling.
Attach the electrical cover
to the indoor and outdoor
unit securely. If not, it could
result in fire or electric
shock due to dust or water.
Make sure to use the part
provided or specified parts
for the installation work.
The use of defective parts
could cause an injury or
leakage of water due to a
fire, an electric shock, the
unit falling, etc.
Make sure to turn off
the main power when
setting up the indoor unit
electrical circuit or power
cords.
There is a risk of electric
shock.
E-4
WARNING
This indicates the possibility of serious injury or death.
The unit should be installed in
accordance with the National
Electrical regulations.
Ensure that the national safety
code requirements have been
followed for the main supply
circuit. Ensure that a properly
sized and connected ground
wire is in place.
CAUTION
Check the unit for damage
This indicates the possibility of serious injury or damage to environments when
that may have taken place
during transportation and do
not install or use damaged
equipment.
All of the manufacturing and
packaging material used for
your new appliance are
compatible with the
environment and can be
recycled.
Dispose of the packaging
material in accordance with
the local requirements.
This product is an air
conditioning system and
contains a coolant that must
be recovered and disposed
of in an appropriate way by
qualified personnel. At the
end of the life cycle, take it to
a proper recycling or disposal
center or return it to the
dealer so that it can be
disposed correctly.
Check if the voltage and the
frequency of the main power
supply are those required for
the unit to be installed and
check the connection.
Make sure that properly sized
disconnecting and safety
switches are installed.
operated incorrectly
Grounding the unit.
Do not connect the ground
to a gas pipe, water pipe,
lightning rod or telephone
grounding. Defective
grounding could cause
electric shock.
Do not install the unit in a
place where it is exposed to
inflammable gas leakage.
There is a risk of explosion.
Install a ground leakage
breaker depending on the
installation place (where it is
humid). If not, it may cause
electric shock.
Perform the drainage/piping
work securely according to
the installation manual.
If not, water could drop from
the unit and household
goods could get wet and
damaged.
Do not attempt to repair,
move, modify or reinstall
the unit on your own. Make
sure that these installations
are carried out by qualified
personnel to avoid electric
shock or fire.
Use the unit on a single outlet
circuit. Do not share the power
outlet with other appliances.
Obtain the consent by a
qualified installer before
connecting the unit to the
power supply system.
.
Fasten a flare nut with a
torque wrench as specified
in this installation manual.
When fastened too tight,
a flare nut may break after
a long period of time and
cause refrigerant leakage.
To prevent injury when
accidentally touching the
indoor unit fan, install the
indoor unit on a place higher
than 8.2ft (2.5m).
The air conditioner must be
installed according to the
national electrical
regulations.
The maximum input power &
current is measured
according to the IEC standard
and the input power &
current is measured
according to the ISO
standard.
E-5
ENGLISH
Choosing the Installation Location
Indoor Unit Outdoor Unit
Where airflow is not blocked
Where cool air can be distributed throughout the room
Install the refrigerant piping length and the height
difference of both indoor and outdoor units as
indicated in the installation diagram
Wall that prevents vibration and is strong enough to hold the
product weight
Out of the direct sunlight
3.3ft (1m) or more away from the TV or radio
(to prevent the screen from being distorted or noise from being
generated)
As far away as possible from fluorescent and incandescent lights
(so that the remote control can be operated well)
A place where the air filter can be replaced easily
CAUTION
Avoid the following places to prevent malfunction of the unit
- Where there is machine oil - Salty environment such as the seaside areas
- Where sulfide gas exists - Other special atmosphere areas
Where it is not exposed to strong wind
Well ventilated and dustless places
Out of the direct sunlight and rain
Where neighbors are not annoyed by operation sound or hot air
Solid wall or support that prevents vibration and is strong
enough to hold the product weight
Where there is no risk of flammable gas leakage
When installing the unit at a high place be sure to fix the unit
legs
9.9ft (3m) or more away from the TV or radio (to prevent the
screen from being distorted or noise from being generated)
Install the unit horizontally
PREPARING FOR INSTALLATION
Observe the clearances and maximum lengths as seen in the picture below when installing the air conditioner.
11.8 inch (300mm) or more
Wrap the refrigerant pipes and the drain
hose with the absorbent pad and vinyl
tape. Refer to page 15 for further details.
11.8 inch (300mm)
minimum
23.6 inch (600mm)
minimum
4.9 inch (125mm)
or more
23.6 inch (600mm)
minimum
“A” maximum
total pipe length
11.8 inch (300mm)
minimum
You can select the direction
of draining. (left or right)
4.9 inch (125mm)
or more
“B” maximum total
pipe Height
Model “A” “B”
AQV09J
49.2ft(15m) 26.2ft(8m)
98.4ft(30m) 49.2ft(15m)
The appearance of the unit may be different from the diagram depending on the model.
AQV12J
AQV18J
AQV24J
E-6
PREPARING FOR INSTALLATION
Accessories
The following accessories are supplied with the air conditioner:
The number of each accessory is indicated in parentheses.
Accessories in the Indoor Unit Case
Installation Plate (1) Remote Control (1)
Batteries for
Remote Control (2)
User’s Manual (1) Installation Manual (1)
Service Manual (1)
Accessories in the Outdoor Unit Case
Drain Plug (1) Rubber Leg (4)
The flare nuts are attached to the end of each pipe of an evaporator or a service port.
Use the nuts when connecting the pipes.
Loading...