Page 1
Air Cleaner
E
DB98-13335A(1)
OWNER’S
INSTRUCTIONS
AC340B
AC340BR
AC340BG
Page 2
E-2
Safety Precautions
The following safety precautions must be taken into account when using this product.
◆ Do not install this product in places where it will come into contact with
combustible gases such as sulfuric gas, hydrogen gas, methane gas, etc.
◆ Do not install this product in places that are exposed to direct sunlight,
near heating equipments and wet places.
◆ When installing the electric wires, do not bend the wire excessively
or place a heavy object on it. The wires may be disconnected or
damaged.
◆ Avoid using inflammable spray gases such as insecticides near
this product.
◆ Prevent children from inserting their fingers or objects into the air inlet
and outlet.
◆ Do not attempt to install or repair this product by yourself. If the
product needs repairing, consult an authorized service personnel.
WARNING
◆ Do not install this product on surfaces that are not even or slant.
This may cause the product to malfunction or make a strange noise
due to vibration.
◆ Make sure that the product is installed in a location that ensures
enough space(at least 5 cm) in front of the air inlet.
◆ Make sure that there are no obstacles near the air inlet and
outlet of the product.
◆ If a strange noise, burning smell or smoke come from the product,
immediately disconnect the power supply and consult an authorized
service personnel.
◆ Do not use this product for other purposes.
◆ Do not spill any kind of liquids into the product.
◆ Do not place containers containing liquid substances on top of the
product.
◆ Do not apply excessive impact on the product.
◆ When using this product in a closed area that combustible fuels are
fired, make sure to ventilate the air occasionally.
◆ Do not use the product in places that have a high temperature and
humidity level, such as a bathroom or a sauna.
◆ Before attempting to clean or repair the product, make sure that the
power supply is disconnected and the fan has stopped rotating.
◆ Do not use substances such as benzene, thinner or alcohol to clean
the surface of the product.
◆ Do not open the filter box when the product is in operation.
◆ When drying the washable filters, do not expose it to direct sunshine.
The powerful sunshine may affect the transformation of the filter case.
◆ Do not touch the filter section with wet hands because the user may be
electrocuted. This is especially true for the Washable Filter section
where a high voltage current flows.
CAUTION
Page 3
E-3
Contents
◆
P
REPARING THE
A
IRCLEANER
■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
■ View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
■ Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
◆
O
PERATING THE
AIRC
LEANER
■ Selecting the Automatic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
■ Selecting the Pollen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
■ Selecting the Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
■ Selecting the Odor Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
◆
O
THERFUNCTIONS
■ Generating Anions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
■ Adjusting the Clean Level (Fan Speed) . . . . . . . . . . . . . . . . . . . . . 12
◆
R
ECOMMENDATIONS FORUSE
■ Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
■ Cleaning the Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
■ Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
◆
T
ECHNICALSPECIFICATIONS
Page 4
E-4
View of the Unit
Control panel
Odor sensor
Dust sensor
Air outlet
Air flow blade
Filter box
Front panel
Power plug
Pre-filter Ionizer Electrostatic
filter
Nano
silver
formula
TiO
2
photocatalyst
filter
Anion
generator
Anti-bacterial
fan
Metal
filter
Washable Filter Section
Recovery Filter
Section
8 Step Cleaning System
Main Unit
The Metal filter is coated with the Nano-silver particles.
NNNNoooottttee
ee
Page 5
E-5
Indicator
Anion Indicator
Filter Reset Button & Indicator
Anion Button
Clean level Indicator
Operating Mode Indicator
Contamination Level Indicator
◆ Contamination Level Indicator
- Classifies the various contaminants in the indoor air, as Odor, Mote and Dust,
and up to 5 levels can be displayed.
- Green indicates that the indoor air is clean. Red means that the indoor
air is contaminated.
- During the first two minutes after the air cleaner is turned on, the contamination level
will move up and down because the sensor will be in the
process of analyzing the contamination level of the indoor air.
So it is recommended that you check the contamination level
in 2 minutes.
NNNNoooottttee
ee
Power Button
Clean Level Selection Button
Operating Mode Selection Button
Control Panel
Page 6
G
etting Started
You have just purchased an air cleaner and it has to be installed according
to the safety precautions of page 2.
This manual contains important information
concerning the use of your air cleaner. Please take some time to
read this booklet as it will help you take full advantage of the product's features.
The booklet is organized as follows.
◆ The following figures are shown from page 4 to 5 :
- View of the Unit
They will help you find the buttons and understand the symbols
that are displayed.
◆ In the manual, you will find a series of step-by-step
procedures for each function available.
Three types of symbols are used to help you understand the illustrations
in the step-by-step procedures :
PRESS PUSH HOLD DOWN
E-6
Page 7
Selecting the Automatic Mode
In the Automatic Mode, the air cleaner automatically adjusts the clean level according
to the signal of the more contaminated level after comparing the dusts and motes
contamination level with the odor contamination level in the indoor air. Anions are
generated into an air automatically and the air flow blade does not move.
1
If the is not displayed on the display, select the Auto mode by pressing
the button until it is displayed on the display of the air cleaner.
Result
: ◆ The air cleaner beeps.
◆ The air cleaner operates in the Auto mode.
2
To adjust the clean level, refer to page 12.
To adjust the generating anions, refer to page 11.
3
If necessary, press the (Power) button.
Result
: ◆ The Power indicator on the display comes on.
◆ The air cleaner runs in the Auto Mode.
◆ The air cleaner makes a ringing sound.
You can change modes at any time.
NNNNoooottttee
ee
E-7
Page 8
Selecting the Pollen Mode
E-8
The Pollen Mode can eliminate pollen and dust particles effectively in the indoor
air. In this operating mode, the air cleaner automatically adjusts the clean level
according to the dusts or motes contamination level without the odor
contamination level in the indoor air. Anions are generated automatically
and the air flow blade moves automatically.
1
If the is not displayed on the display, select the Pollen mode by pressing
the button until it is displayed on the display.
Result
: ◆ The air cleaner beeps.
◆ The air cleaner operates in the Pollen mode.
2
To adjust the clean level, refer to page 12.
To adjust the generating anions, refer to page 11.
3
If necessary, press the (Power) button.
Result
: ◆ The Power indicator on the display comes on.
◆ The air cleaner runs in the Auto Mode.
◆ The air cleaner makes a ringing sound.
You can change modes at any time.
NNNNoooottttee
ee
Page 9
Selecting the Sleep Mode
E-9
If you wish the air cleaner to clean the air in your room quietly, select the
Sleep Mode. In this operating mode, the air cleaner runs in "Low Speed"
which is the quietest clean level setting. Anions are generated into an air
automatically and the air flow blade does not move.
1
If the is not displayed on the display, select the Sleep mode by pressing
the button until it is displayed on the display.
Result
: ◆ The air cleaner beeps.
◆ The air cleaner operates in the Sleep mode.
2
To adjust the clean level, refer to page 12.
To adjust the generating anions, refer to page 11.
3
If necessary, press the (Power) button.
Result
: ◆ The Power indicator on the display comes on.
◆ The air cleaner runs in the Auto Mode.
◆ The air cleaner makes a ringing sound.
You can change modes at any time.
NNNNoooottttee
ee
The brightness of the display during the Sleep Mode
◆ In the Sleep Mode, the brightness of the display decreases so that
it may not disturb your sleep.
NNNNoooottttee
ee
Page 10
Selecting the Odor Mode
If you select the Odor Mode, the air cleaner can eliminate airborne contaminants and
harmful smells effectively in the indoor air. In this operating mode, the air cleaner
automatically adjusts the clean level according to the signal of the odor contamination
level without the dusts and motes contamination level in the indoor air. Anions are
generated automatically and the air flow blade moves automatically.
1
If the is not displayed on the display, select the Odor mode by pressing
the button until it is displayed on the display.
Result
: ◆ The air cleaner beeps.
◆ The air cleaner operates in the Odor mode.
2
To adjust the clean level, refer to page 12.
To adjust the generating anions, refer to page 11.
3
If necessary, press the (Power) button.
Result: ◆ The Power indicator on the display comes on.
◆ The air cleaner runs in the Auto Mode.
◆ The air cleaner makes a ringing sound.
You can change modes at any time.
NNNNoooottttee
ee
E-10
Page 11
Generating Anions
E-11
The Anion Generator generates anions, which are beneficial to the human body.
Use this function if you want to feel refreshed both physically and mentally,
just as if you were in the midst of a forest.
If the air cleaner is turned on, anions are generated automatically.
1
If the Anion Indicator is not displayed on the display, select the Anion
Generation function by pressing the button.
Result
: ◆ The air cleaner beeps.
◆ The Anion Indicator lights up on the display.
◆ The air cleaner generates anions into the indoor air.
2
If necessary, press the (Power) button.
Result: ◆ The Power indicator on the display comes on.
◆ The air cleaner runs in the Auto Mode.
◆ The air cleaner makes a ringing sound.
If you wish to turn off the Anion Generation function, press the button
again.
Result
: ◆ The Anion Indicator disappears on the display.
◆ The air cleaner stops generating anions into the indoor air.
3
◆ Anions are ultra-fine particles charged negatively in the air.
There are vast quantities of them in nature, for example near
waterfalls or in the midst of a forest. When inhaled in sufficient
quantities, anions can enhance the metabolism of your blood cells,
help you recover from fatigue faster, and calm your nerves.
Thus anions are beneficial to you both physically and mentally.
NNNNoooottttee
ee
Page 12
Adjusting the Clean Level (Fan Speed)
The air cleaner automatically adjusts the clean level according to the
contamination levels of the indoor air. It is also possible for you to
manually select the clean level.
1
If you wish to manually select the clean level, press the button one
or more times until the desired clean level is selected.
Result
: ◆ The air cleaner beeps.
◆ The air cleaner operates in the clean level that was selected.
2
If necessary, press the (Power) button.
Result
: ◆ The Power indicator on the display comes on.
◆ The air cleaner runs in the Auto Mode.
◆ The air cleaner makes a ringing sound.
If you wish the air cleaner to automatically adjust the clean level for you,
press the button until the Auto mode is selected.
Result
: ◆ The clean level that was selected is canceled.
◆ The air cleaner operates in the Auto mode.
◆ The air cleaner automatically chooses the appropriate clean
level according to the levels of contamination in the indoor air.
3
HH (Turbo)
H (High)
M (Medium)
L (Low)
E-12
Page 13
Operating Recommendations
E-13
Here are a few recommendations that you should follow when using
your air cleaner.
Topic Recommendation
Wash indicator
If the light on the "Wash" indicator comes on, the
washable filters must be cleaned. The washable
filters must be cleaned more often in environments
that include large amounts of dust in the air.
Closing the air flow blade
If you want to close the air flow blade, use the Power
button on the control panel.
Do not close the air flow blade with your hands.
Page 14
Cleaning the Air Cleaner
E-14
Cleaning the Lens of the Dust Sensor
To get the best possible result from your air cleaner, you must clean
the lens of the dust sensor regularly. The dust sensor is responsible
for sensing the accumulation level of small and big dust particles in
the air in your room.
1 Open the front panel.
2 Clean the lens of the Dust Sensor thoroughly with a cotton stick.
2
1
Dust Sensor
Dust Sensor Lens
Slightly pull out the bottom part of the front panel
(①)
, lift it up
(②)
and then separate it from the unit.
NNNNoooottttee
ee
If the lens of the Dust Sensor is cleaned with a sharp or rough
object, the lens is damaged, so the Dust Sensor may not work
properly.
NNNNoooottttee
ee
◆ You must clean the lens of the Dust Sensor every six months.
However, this may vary according to the time and place that the air
cleaner was operated. So the air cleaner must be cleaned more
often in environments that have a high level of dust accumulation.
◆ The Odor Sensor does not have a lens. So you do not need to
clean the Odor Sensor.
NNNNoooottttee
ee
3 After you have cleaned the lens of the Dust Sensor, put the front panel
back into the place.
Page 15
E-15
3 Leave the Washable Filter Section in the shade to dry for over 12 hours.
5 Press the control panel’s button for 2 seconds.
Result
: ◆ The Wash Indicator on the control panel turns off.
It will light up again when the time for the next filter
washing comes.
◆ The air cleaner beeps.
4 Put the Washable Filter Section back into the place and close the Filter
Box.
During this process, make sure that the filter is not exposed to
direct sunlight because the sun's rays may affect the
transformation of the filter case.
NNNNoooottttee
ee
Cleaning the Washable Filters
Washable Filters are responsible for eliminating fine particles of dust,
molds and mites in the air that are as small as 0.5 microns. It also has the
function of sterilizing virus or bacteria in the air in your room. You must
clean the Washable Filters every 3 months or whenever the Wash
Indicator comes on. The cleaning frequency of the Washable Filters may
vary according to the time and place that the air cleaner is operated.
1 Open the Filter Box and pull out the Washable Filter Section towards the
direction of the arrow.
2 Wash the Washable Filter Section under lukewarm tap water.
◆ If the filter is too contaminated, leave it in warm water mixed with
neutral detergent for 30 minutes, and brush the contaminants off
with a soft brush.
◆ The Pre-Filter is easy to clean because it can be taken out of the
Washable Filter Section and washed separately.
NNNNoooottttee
ee
Even though the Wash Indicator does not light up,
always press the button after washing the
Washable Filter Section.
IMPORTANT
Washable Filter
Section
Pre-Filter
Page 16
Cleaning the Air Cleaner (cont.)
E-16
3 After pushing the Recovery Filter Section back into the place, close the
Filter Box.
Recovering the photocatalyst filter
The phototcatalyst filter eliminates various odors in the indoor air.
1 Open the filter box and pull out the Recovery Filter Section towards in
the direction of the arrow.
2 Dry the Recovery Filter Section under the sunlight at least for 8 hours.
◆ The more frequently you dry the photocatalyst filter under the
sunlight, the higher the filter efficiency would be.
◆ You can purchase new photocatalyst filters in the authorized
service center.
Recovery Filter
Section
Photocatalyst filter
Don’t wash the photocatalyst filter. It must be dried only
under the sunlight every six months.
IMPORTANT
NNNNoooottttee
ee
Page 17
E-17
Solving Common Problems
Explanation/Solution
◆ Check for a power failure.
◆ Check that the power plug is plugged in tightly.
◆ Check that the power outlet is not of a poor quality.
◆ Check that the Filter Box is closed properly.
Problem
The air cleaner does not
operate.
Before contacting the after-sales service, perform the following simple checks.
This may prevent you from making an unnecessary call and wasting your time and money.
◆ Check whether the Filter Box was opened during operation.
Press the Power button if you wish to restart the air cleaner.
The air cleaner stops its
operation abruptly
◆ Make sure that the air cleaner is used in places that have
a high level of odor permeating contaminants in the air.
The air cleaner cannot fully function in an environment where the
level of contamination is too high.
◆ Check whether the source of the unpleasant odor is the unclean
filters in the Filter Box.
Unpleasant odors can be
detected coming from the air
cleaner.
◆ Check whether the air cleaner is operating in the Sleep Mode.
In the Sleep Mode, the display automatically diminishes its
brightness to ensure a comfortable sleeping setting.
The Display Brightness is too
dim.
◆ Check whether the lens of the Dust Sensor is unclean.
◆ Check whether the filters in the Washable and Recovery Filter
Section have been cleaned and recovered regularly.
◆ Check that there are no additional contaminants entering the room
through open windows and doors.
The air in the room still feels
unclean.
◆ Make sure that you have pressed the Filter Reset button after you
have cleaned the Washable Filter Section.
The Wash Indicator stays on.
◆ Close the air flow blade by using the Power button on the control
panel. Do not close the air flow blade with your hands.
The air flow blade does not close.
◆ Check that the air cleaner is in the Auto or Sleep Mode.
- In the Auto or Sleep Mode, the air cleaner automatically does not
move the air flow blade.
The air flow blade does not
move.
Page 18
Technical Specifications
E-18
Model
AC340B
AC340BR
AC340BG
220-240V~, 50/60Hz
Power Supply
Page 19
E-19
Memo
Page 20
ELECTRONICS
Printed in Korea
THIS AIR CLEANER IS MANUFACTURED BY:
Loading...