This manual is provided for information purposes only. All information included herein
is subject to change without notice. Samsung Electronics is not responsible for any
damages, direct or indirect, arising from or related to use of this manual.
This chapter provides information on installing the supplied
Samsung software. You must install the Samsung software
to use your product as a printer and scanner.
The topics included in this chapter are:
• About Samsung Software
• System Requirements
S
OFTWARE
• Installing Samsung Software
• Installing USB Driver for Windows 98/Me
• Configuring Fax and Internet Gates
• Uninstalling Samsung Software
1.
About Samsung Software
You must install the SmarThru CD-ROM after you have setup
your product and connected it to your computer. The SmarThru
CD-ROM includes the following:
• MFP Driver
• SmarThru Software
• OCR Software (AnyPage Lite)
MFP Driver
To use your product as a printer and scanner, you must install
the MFP driver.
SmarThru Software
SmarThru is the accompanying software for your multifunctional
product. SmarThru contains a powerful image editor that allows
you to edit images in many ways and also includes powerful
Internet mail client software.
With SmarThru, you can save the scanned images in a dedicated
storage area for subsequent editing, sending via e-mail or fax,
printing, and processing by other programs of your choice.
OCR Software
OCR (Optical Character Recognition) is software that has the
ability to recognize most character formats, so that a scanned
document can be read and edited with word processing
software.
(AnyPage Lite)
2
I
NSTALLING
S
OFTWARE
1.
System Requirements
Before you begin, ensure your system meets the minimum
requirements.
Supported Operating System
Windows 95 OSR2/Windows 98/Windows 98 SE/Windows NT 4
Workstation or Server with Service Pack 3/Windows 2000
Professional or Advanced Server/Windows XP Home edition or
Professional.
Minimal Requirements
• Disk space: 130 MB for installation
• Memory: 64 MB
• CPU: Pentium II 233 or higher
• Required software: Internet Explorer 4.01.
Recommended
• Disk space: 250 MB for installation
• Memory: 128 MB
• CPU: Pentium II 400 or higher
• Required software: Internet Explorer 5.5 or above
N
OTES
:
• Administrative rights should be set for installation/uninstallation
on Windows NT 4.0/2000/XP.
• Windows 95 versions prior to OSR2 are not recommended due to
compatibility with OLE/COM libraries.
1
I
NSTALLING
S
OFTWARE
3
1.
OK
.
Installing Samsung Software
N
OTES
:
• If you are using a USB cable, you must be running Windows 98/
Me/2000/XP. Windows 98 or Me and connect the printe rusing
the USB cable, you must install the Samsung USB driver before
proceeding to install the Samsung software. see “Installing USB
Driver for Windows 98/Me” on page 1.11.
• Make sure that your product is plugged in and connected to your
computer’s parallel port or USB port
software
support USB connection.
1
If the “New Hardware Found” screen appears when the
computer boots up, click
from the CD. Windows 95 and Windows NT 4.0 do not
Cancel
before installing
.
2
Insert the supplied SmarThru CD-ROM into your CD-ROM
drive.
The SmarThru CD-ROM should automatically run and
opening window appears.
If the opening window does not appear, click
then
Run. Type X:Autorun.exe, replacing “X” with the
letter of your drive, and click
3
If you are asked to select the model name, click MFP 830
.
Start, and
series
4
I
NSTALLING
S
OFTWARE
4
If you are asked to select the language, choose the desired
language.
1.
1
5
Click Install the Samsung Software on your PC.
Installs the
Samsung
Software
on your PC.
Uninstall
the
Samsung
Software.
See page
1.19.
I
NSTALLING
S
OFTWARE
5
6
The Welcome window opens. Click Next.
7
The User Information window opens. Enter company and
your name, then click Next.
1.
6
I
NSTALLING
S
OFTWARE
8
The Choose Destination Location window opens. Click Next.
1
I
NSTALLING SOFTWARE
1.7
9
The SmarThru installation supports three types of setup:
•Typical: Program will be installed with the most common
options and is recommended for most users.
•Compact: Only the MFP driver will be installed.
•Custom: You may choose the options you want to install.
Recommended for advanced users.
If you select the Custom installation, you may
choose the options you want to install.
1.8
I
NSTALLING SOFTWARE
10
Click Next.
• SmarThru Software: to scan and edit images
and work with electronic documents.
• OCR Software: AnyPage Lite software to enable
OCR.
• MFP Driver: to print and scan.
11
You can choose SmarThru networking option. This
feature allows you to share the modems on your computer
and the product as a scan device via a network or to access
these shared devices located on other computers.
Stand-alone configuration does not allow you to use any
networking features such as Remote Fax or Remote Scan
service.
If you selected SmarThru networking, you can select to
install server, client, or both.
1
Server allows you to share local fax modem and/or scanner
over a LAN. You can control sharing by managing remote
service user. Client allows you to use Remote Fax or
Remote Scan services provided by SmarThru Remote
Services Server over a LAN. You need to have a client
account. These accounts are provided by the server. For
details on Remote Fax/Scan Services, please refer to the
SmarThru User’s Guide.
I
NSTALLING SOFTWARE
1.9
12
Click Next.
13
When the installation is completed, shut down and restart
your computer.
If your computer does not shut down and restart
automatically, you must shut it down manually and restart
it before the changes will be saved.
1.10
I
NSTALLING SOFTWARE
Installing USB Driver for Windows
98/Me
For Windows 98 or Me, when you connect the printer using USB
cable, take the following steps to install the Samsung USB driver
and the Samsung software.
N
OTE
:
If you have already used any Samsung printer using USB
connection in your PC, you do not need to install the Samsung USB
driver. You just install the Samsung software as described on page
1.4.
1
Make sure that the printer is connected to the computer
with USB cable and both the printer and the computer are
turned ON. For details on the USB connection, please refer
to the “Laser Facsimile User’s Guide” which came with your
product.
2
The Add New Hardware Wizard dialog box appears. Click
Next.
1
I
NSTALLING SOFTWARE
1.11
3
Check Search for the best driver for your device and
click Next.
4
Check CD-ROM drive and click Browse, then choose
x:\USB (where x is the driver letter for the CD-ROM
driver). Click Next.
1.12
I
NSTALLING SOFTWARE
5
Click Next. The USB driver will be installed.
6
Click Finish.
1
7
If you are asked to select the model name, click MFP 830
series.
I
NSTALLING SOFTWARE
1.13
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.