Samson XM 410 User Manual
PRO
TYPE:
POWERED
POWERED MIXERS
MIXERS
PRODU CT DESCR IPTI ON
6 CHANNEL 400W POWERED MIXER
XM 410
SERIE S
XM POWERED MIXERS
PRODUCT SPECIFICATION SHEET
FRONT PA NEL
CATEGO RY
GENERAL DESCRIPTION
The XM410 is a six channel, 400 Watt powered mixer with
built-in 24 BIT DSP (Digital Signal Processor) effects. The
XM410 will give you clean, clear sound reproduction thanks
to the high quality, low noise microphone preamps, super
clean mix bus, on-board 7-band graphic equalizer and the
high output/low distortion power amplifier. For studio quality
processing, you can add one of the 100 dazzling digital
effects including Delays, Chorus and lush Reverbs to your
voice or instruments. The XM410’s ingenious Kickback
enclosure allows you to tilt the unit back to see, and
operate, the controls with ease. The unit is easy to transport
with its compact size and oversized, sure-grip handle.
The super-tough ABS construction ensures reliable, high
quality sound from venue-to-venue and performance-toperformance day in, and night out. Optimized for live sound
reinforcement and commercial installations, the XM410 is
an ideal mixer and power amp solution offering big sound in
a compact package.
BACK PAN EL
FEATURES
> Six channel powered mixer in an ergonomically correct
kickback enclosure allowing you to easily see and operate
the front panel functions.
> Six Mic / Line inputs with 1/4-inch phone and
XLR connectors.
> 2 x 200 Watts, or 200 Watt Main / 200 Watt Monitor, or
400 Watts Bridged power operating modes.
> A built-in, 24-bit DSP (Digital Signal Processor) with 100
selectable presets including Reverb, Delay and Chorus,
offers dazzling studio quality effects.
> Dynamic or condenser microphones connect easily to the low
noise mic pre-amps with available 36 Volt Phantom Power.
> The 3-Band EQ on each channel enables you to tailor the
tonal response for each input.
> Two Auxiliary sends on each channel for building an
independent mix to send to the DSP effects and monitors.
> 7-band Graphic Equalizer for the Main mix, allowing the
system to be set-up for maximum gain before feedback.
> A convenient Tape / CD Input is provided so you connect a
stereo device for accompaniment or background music.
continues»
©2006 Samson v1.0 5/06
PRODUCT SPECIFICATION SHEET
540mm
338mm
FRONT
SIDE
348mm
SERI ES DESC RIPTIO N CATE GORY
XM 6 CHANNEL 400W POWERED MIXER POWERED MIXERS
XM410
FEATURES (continued)
> Brilliant sound quality from the advanced circuit design,
utilizing low noise operational amplifiers.
> Durable ABS plastic enclosure is road tough insuring reliable
performance from night to night and venue to venue.
> Convenient oversize, sure grip handle make the unit
easy to carry.
> Three-year extended warranty.
ARCHITECT’S & ENGINEER’S SPECIFICATIONS
The Samson XM410 shall be a 6 channel powered mixer.
There shall be 6 mic/line channels each with 3 bands of
EQ. Each channel shall have 2 aux sends, 1 to the monitor
output and 1 to the DSP. The DSP shall have 99 programs
of digital effects with a level control to send the DSP signal
to the main bus. In the Main section there shall be an Aux
input going directly to the main amplifier section. There shall
be a tape in and a tape out with level control. There shall be
a main mixer output before the amplifier section. The unit
shall supply phantom power to the mic inputs. There shall
be a monitor output getting its signal from the aux 1 send.
There shall be a 7 band EQ getting its signal from the main
bus. There shall be a 3 position switch to feed the main and
monitor bus to the 2 amplifiers as: Main / Main to amp 1 and
2, Main / Monitor to amp 1 and 2, and Main signal / bridged
to amp 1 and 2. There shall be output metering on LED’s
with clip indicators.
XM410 SPECIFICATIONS
Rated Output power ..........................200W/4Ω per amplifier
Frequency response .......................... 20Hz~20KHz+/-0.5dB@1W
Output into 8Ω (AMP OUT): 20
Hz~20KHz+/-0.4dBu @+4dB
Output into 10kΩ (MAIN OUT,
MONITOR OUT, AUX 2 SEND).
Total Harmonic Distortion .................. Less than 0.06% @
20Hz~20KHz, 75W output into
4Ω (AMP OUT); Less than
0.1%@20 Hz~20KHz, +4dBu
output into 10KΩ (MAIN OUT,
MON OUT, AUX 2 SEND).
HUM & Noise ...................................-121dB equivalent input noise
(Average, RS+150Ω) ......................... -100dB residual output noise
(MAIN OUT, MONITOR OUT,
AUX 2 OUT)
(with 22Hz~22KHz BPF) .................... -79dB (MAIN OUT, MONITOR
OUT) Master level control at
maximum, all channel level
controls at minimum. -79dB
(AUX 2) Master level control
at maximum, all channel level
controls at minimum.
Maximum Voltage Gain ...................... 67dB CH IN (MIC) to AMP OUT
48dB CH IN (MIC) to MAIN OUT, MONITOR OUT
54dB CH IN (MIC) to AUX 2 OUT
30dB CH IN (MIC) to REC OUT
17dB CH IN (LINE) to MAIN OUT, MONITOR OUT
7dB AUX IN to MAIN OUT
24dB TAPE IN to MAIN OUT
Crosstalk, 1KHz ............................... 70dB adjacent input, 70dB
input to output
Input Channel Equalization
HIGH ................................. 12KHz shelving (+/- 15dB
maximum)
MID ................................... 2.5KHz peaking (+/- 12dB
maximum)
LOW .................................. 80Hz shelving (+/- 15dB
maximum)
Meters ............................................ 7 POINT LED METERS (-20,
-10, -7, -4, 0, +3, +6dB)
Graphic Equalizer ............................. 7 bands (63, 160, 400, 1K,
2.5K, 6.4K, 16KHz)
Internal DSP Effects ......................... 24 BIT - 10 Presets each:
1 - Performance; 2 - Hall
Reverb, 3 - Plate Reverb;
4 - Spring Reverb; 5 - Echo;
6 - Flange + Verb; 7 - Chorus
+ Verb; 8 - Echo + Verb; 9Chorus; 10- Flange
Phantom Power ................................ +36V
CLIP Indicators ................................ Turn on: THD> 0.1%
Foot Switch ..................................... DIGITAL EFFECT MUTE: ON/OFF
Power Requirement .......................... 100W-240V, 50/60Hz
Power Consumption .......................... 260W 1/8 power, 600W MAX.
Weight ............................................ 31 lbs. (14Kg)
Dimensions (W x H x D) .................... 21” x 14” x 13-3/4”
534mm x 356mm x 350mm
Loading...