SAMSON S-PHANTOM service manual

PRO



144mm

105mm

51mm

TOPFRONT

PROCESSORS

TYPE:

SIGNAL

PROCESSO RS

PRODU CT DESCR IPTI ON

PHANTOM POWER

S•PHANTOM

SERIE S

S•MINI SIGNAL PROCESSING

PRODUCT SPECIFICATION SHEET

GENERAL DESCRIPTION

The S•Phantom is a two channel, 48-volt phantom power supply capable of powering most any condenser microphone. The S•Phantom is a perfect solution for applications where the use of condenser microphones is desired and the mixer, recorder, PA, or amplifier to be used does not provide phantom power on the microphone inputs.

FEATURES

> Two channel, 48 volt phantom power supply for

powering most condenser microphones.

> Two balanced XLR microphone inputs.

> Two balanced XLR microphone outputs.

> Convenient ¼˝ phone jack output for Mic 1, for easy

hook-up to many personal recorders without XLR inputs.

> Large rubber bumper feet.

> 18 Volt AC adapter included.

> Three year extended warranty.

CATEGO RY

S•PHANTOM SPECIFICATIONS

Phantom Power ................................ Voltage 48 Volt

Connector s

Mic One Input .................... XLR Balanced (PIN 1 GND,

Mic Two Input ..................... XLR Balanced (PIN 1 GND,

Mic One Output .................. XLR Balanced (PIN 1 GND,

Mic One Output .................. ¼˝ Phone Balanced

Mic Two Output .................. XLR Balanced (PIN 1 GND,

Control Switches

48 Volt ..............................ON / OFF

Indicators

Power On ........................... Red Light Emitting Diode

Phantom On ....................... Red Light Emitting Diode

Power ............................................. 18 VDC

Dimensions (L x W x H) ..................... 5.65˝ x 4.13˝ x 2˝

Weight ............................................ 16.5 oz., 419 gm.

PIN 2 HOT, PIN 3 COLD)

in 48 Volt switch

144mm x 105mm x 51mm

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The Samson S•Phantom shall be a 2-channel 48 volt phantom power supply for microphones. It shall have XLR balanced inputs. It shall have XLR balanced outputs on both channels and a ¼˝ output on channel 1. It shall have a switch to turn the phantom power on and off. It shall come with an (included) AC adapter.

FRONT PA NEL

BACK PAN EL