SAMSON S-DIRECT PLUS service manual

PRO

144mm

105mm

51mm

TOPFRONT

PROCESSORS

TYPE:

SIGNAL

PROCESSO RS

PRODU CT DESCR IPTI ON

DIRECT BOX

S•DIRECT PLUS

SERIE S

S•MINI SIGNAL PROCESSING

PRODUCT SPECIFICATION SHEET

GENERAL DESCRIPTION

The S•Direct Plus gives you all the same features of the original S•Direct, but in stereo. It’s like having two direct boxes in one, perfect for keyboard players, or any instrument with multiple outputs.

FEATURES

> Stereo direct INSERTION box

> perfect for stage and studio and fixed installation

> 1/4” linked inputs/outputs

> 48 volt phantom power or 9 volt operation with auto

battery shut off

> Switch-able ground lift

> Gold plated XLR balanced outputs

> Solid extruded aluminum chassis with large rubber feet

CATEGO RY

S•DIRECT PLUS SPECIFICATIONS

Frequency Response ......................... 5-35 kHz, -3 dB

Noise Level

(22-22kHz, Input Shorted) .. -104 dBu

THD + N (10 Hz -22 kHz) .................. 0.013% typ.@ 1VRMS,1kHz.

Input Impedance

(GTR) ................................ > 1 Meg. Ohm

(SPK) ................................ 10 k Ohm

Max. Input Level (1% THD) ............... +8.1 dBu ( 9v. Batt.)

GTR /SPK Input ................................. 1/4≤ Phone Jack,

OUTPUT/LINK ................................... 1/4≤ Phone Jack,

Balanced Output ............................... XLR Connector, balanced

Phantom Power ................................ 24-48 VDC

Batter y ........................................... 9 Volt

Dimensions (W x D x H) .................... 5.65˝ x 4.13˝ x 2˝

Weight ............................................ 15 oz. (43 Kgwith fuse)

+11.3 dBu (48v. Phantom)

unbalanced

144mm x 105mm x 51mm

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The Samson S•Direct Plus shall be a two channel audio signal direct box. Two ¼˝ inputs shall be provided for the signal sources. A switch shall be provided to select between instrument level and speaker level as input for each channel. Two ¼˝ jacks shall be provided to link the signal out at the input levels. Two XLR’s shall be provided for balanced outputs. A 9 volt battery shall be needed for standard operation. A switch shall be provided to switch between the internal 9 volt battery and 48 volt operation derived from the console attached through the XLR output.

FRONT PA NEL

BACK PAN EL