Samson CM11B Quick Start Guide

PRO











MICROPHONES

TYPE:

GOOSENECK/

BOUNDARY/CHOIR

PRODU CT DESCR IPTI ON

OMNI-DIRECTIONAL BOUNDARY MIC

CM11B

SERIE S

INSTALLATION MICS BOUNDARY MICS

PRODUCT SPECIFICATION SHEET

GENERAL DESCRIPTION

The CM11B is a low profile, surface-mount boundary microphone ideal for flat surfaces like conference room tables, alters or hanging on walls. The minimally intrusive design allows that microphone to be used in applications where low visibility is desired. The CM11B features a permanently charged condenser element with an omnidirectional pickup pattern. Because the CM11B is omni-directional, it provides linear pickup in a 360-degree pattern, allowing the unit to be placed on the center of a conference table to pick-up everyone seated. Although the CM11B is very small in size, all the electronics are contained within the body, eliminating the need for any external electronics pack. The CM11B is fitted with a standard 3-pin miniature male XLR connector, and a 30-foot mini XLR to standard XLR cable is included. The CM11B operates on standard 9 through 52 Volt phantom power. A heavy Neoprene rubber pad is added to the bottom of the unit to decouple the microphone from the surface helping reduce unwanted pick-up noise. The CM11B is built using heavy-duty die cast construction with reinforced steel grill screen. Convenient mounting holes and hardware for hanging on walls or ceilings is included. A low reflectance, matte black finish enhances the stylish minimalist look.

CATEGO RY

FEATURES

> Omnidirectional - Condenser

> Low-profile with onboard electronics and no external

power supply

> Mini XLR connector

> Includes 30-foot cable with mini to standard XLR connectors

> Standard 9 – 52 Volt Phantom Power Operation

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The Samson CM11B shall be an omni-directional boundary microphone. It will be available in black or white, with a metal, mesh grill top and rubber bottom for its shock mounting properties. It shall be an omni-directional condenser microphone element type and require between 9 and 52 volt phantom powering. The CM11B shall connect via a mini XLR connector to the included 30-foot microphone cable.

CM11B SPECIFICATIONS

Element Type ................................... Fixed charge condenser

Polar Pattern ................................... Omni-directional

Frequency response .......................... 30 - 18000Hz

Sensitivity ....................................... -39dBV/Pa

Rated impedance ............................. 600 ohms

Max. SPL ......................................... 127dB

Dynamic range ................................. 103dB

S/N ratio ......................................... 70dB

Power Supply ................................... 9~52V phantom supply

Power consumption .......................... 4mA

PRODUCT SPECIFICATION SHEET

SERI ES DESC RIPTIO N CATE GORY

INSTALLATION MICS MUNI-DIRECTIONAL BOUNDRY MIC BOUNDRY MICS

CM11B

CM11B FREQUENCY RESPONSE

CM11B POLAR PATTERN