
10A
PARAMETER SPECIFICATIONS
SYSTEM
LEAD ACID BATTERY TYPE Sealed, AGM
NOMINAL BATTERY SYSTEM VOLTAGE 12V / 24V, Auto Detection
MAXIMUM CHARGING /
LOADCURRENT
10A
SELF CONSUMPTION ≤ 8.4mA
MINIMUM BATTERY VOLTAGE
TO START OPERATION
6V
CHARGING
CHARACTERISTICS
BOOST CHARGE VOLTAGE 14.4V
FLOAT VOLTAGE 13.8V
EXIT TO ABSPORTION (BOOST) WHEN IN
FLOAT STAGE
13.2 V
INTERNAL TEMPERATURE COMPENSATION
LOAD CONTROL
LOW BATTERY DISCONNECT 11.1V
LOW BATTERY RECONNECT 12.6V
INPUT/OUTPUT
CONNECTIONS
TYPE AND WIRE SIZE Moving Cage Type, 4 mm2 / AWG #12
PROTECTIONS
UNDER VOLTAGE WARNING 12.0V (LED Battery Status Indicator Orange)
UNDER VOLTAGE WARNING AUTO RESET 12.2V
OVER VOLTAGE LIMIT ≥15.5V (Charging Stops)
OVER VOLTAGE LIMIT AUTO RESET ≤15.0V (Charging Resumes)
OVER VOLTAGE DISCONNECT
INDICATION
16.0V
COMPLIANCE
ELECTROMAGNETIC COMPATIBILITY CE marked - Conformity with EMC Directive 2004/108/EG
ENVIRONMENTAL
OPERATING TEMPERATURE −35°C to + 55°C
INGRESS PROTECTION IP-30 (Protected against ingress of objects > 2.5mm;
Not protected against ingress of water
GENERAL
DIMENSIONS 138.6 x 69.3 x 37 mm / 5.46 x 2.73 x 1.46 in
WEIGHT 0.13 kg / 0.29 lb
2 YEAR LIMITED WARRANTY
Charge
Controller
Design Features
- 3 stage intelligent Series Type PWM charging
- Automatic battery voltage detection: 12V / 24V
- 100% input and output within -35˚C to +50˚C
- Electronic protections: overheating, overcharging, over discharge,
overload and show circuit
- Reverse protection any combination of solar module and battery
- Optional MSK-TS External Temperature Sensor
18mV/°K/Cell (with built-in Temperature Sensor)
(Optional MSK-TS External Temperature Sensor)
Model
MSK-10A
10 Amps
NOTE: Specications are subject to change without notice.
To view a full selection of Samlex products visit our website at www.samlexsolar.com or contact us: 1(800) 561-5885 or sales@samlexamerica.com
To view a full selection of Samlex products visit our website at www.samlexsolar.com or contact us: 1-800-561-5885 or sales@samlexsolar.com
12023-MSK-10A-0420