Saitek Wireless Adapter User Manual

Saitek
WIRELESS
ADAPTER
USER MANUAL
GETTING CONNECTED: IT’S EASY!
Before you start, make sure that
1
your Sony PlayStation®2 is turned OFF!
Install the Receiver into the game console’s
2
ports by lining it up carefully and inserting it gently, but firmly. Now, power up the PlayStation®2.
Locate the rechargeable batteries provided
3
with your Wireless Adapter, and insert them into the Power Pack. IMPORT ANT: The Power Pack must be charged for at least 12
before the initial
hours use! For charging details, see Section 2.
If you want to play right away, insert 4 fresh AA batteries into the spare cartridge, and slide the cartridge into the front of the Hub. It will lock into place when installed correctly.
you can actually charge the Power Pack while you’re playing with the second set of batteries.
After installing the batteries, the Hub will
4
start communicating with the Receiver automatically.
as well as the green Signal Indicator LED on the Receiver.
Plug up to 2 game controllers into Ports 1
5
and 2 of the Hub.
function allows 2 controllers to work at the same time.
Next, decide where you want to play.
6
You can position yourself anywhere within about 10 metres (approximately 30 feet) of the console.
PlayStation® games and have some fun!
The built-in auto-scan
Time to start up one of your
CAUTION:
Do not recharge
standard Carbon Zinc
or Alkaline batteries!
Do not mix battery
types.
Note that
FEATURES AND CONTROLS
Pass-through Port
Scan Button
(with cover on)
Signal Indicator LED
Charge Indicator LED
Battery Level
Indicator LEDs
HUB
RECEIVER
Power Pack
(shown charging
in Receiver)
Power Pack
(shown attached
to Hub)
Rumble Button
Controller Ports 1 and 2
3
POWER PACK
Loading...
+ 5 hidden pages