SAITEK M100X MINI WIRELESS MOUSE User Manual

M100X Mini Wireless
Mouse

USER MANUAL

BEDIENUNGSANLEITUNG

GUIDE D’UTILISATION

MANUALE D’USO

MANUAL DEL USUARIO

Saitek

®

PM56_manual.qxd 14/08/2008 14:25 Page 1

Powering the mouse on/off

The mouse will automatically switch itself on when you insert new
batteries. To save battery power when not using the mouse, press the
power button on the underside and hold for for 3~5
seconds.To restart the mouse press the button once.

The mouse LED flashes blue to indicate the batteries
are running down. When this happens replace the
batteries.

Troubleshooting

If the mouse does not work:
1 Check the batteries have not expired and are inserted properly.
2 Make sure the mouse is switched on by pressing the button on the

underside.
3 Check the nano receiver is properly inserted in one of your PC’s USB ports.
4 Insert the nano receiver in another of your PC’s USB ports.

Important Information

Some experts believe that using any mouse or trackball may cause serious
injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or
weakness in these areas, please consult a qualified health professional
immediately.

To reduce the risk of injury, please follow these precautions:

• Take frequent breaks, get up and walk around several times every hour.

• Vary your tasks throughout the day.

• Keep your shoulders relaxed with your elbows at your side. Position your

keyboard and mouse so you do not have to reach.

• Adjust your chair and keyboard so your upper arms and wrists are straight.

• Avoid resting your wrists on sharp edges.

Technical Support

Can't get started - don't worry, we're here to help you!
Nearly all the products that are returned to us as faulty are not faulty at all - they

have just not been installed properly.
If you experience any difficulty with this product, please first visit our website

www.saitek.com. The technical support area will provide you with all the
information you need to get the most out of your product and should solve any
problems you might have.

SAITEK M100X MINI WIRELESS MOUSE

System Compatibility

PC running Windows XP/XP64/Vista/Mac OS X

Installation

1

2

3

4

5

6

Press the clip on the
underside of the mouse.

Unclip the battery cover. Slide the cover back to

expose the battery
compartment.

Unclip the nano wireless
receiver.

Insert the nano wireless
receiver in one of your
PC’s USB ports. With
your PC switched on,
follow the device
installation wizard to
complete the installation
of the new USB device.

Insert the batteries in
the compartment in the
direction shown and
replace the cover.

PM56_manual.qxd 14/08/2008 14:25 Page 2

If you do not have access to the internet, or if the website cannot answer your
question, please contact your local Saitek Technical Support Team. We aim to
offer quick, comprehensive and thorough technical support to all our users so,
before you call, please make sure you have all the relevant information at hand.

To find your local Saitek Technical Support Center, please see the separate
Technical Support Center sheet that came packaged with this product.

Information for Customers in the United States
FCC Compliance and Advisory Statement

Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

1 This device may not cause harmful interference, and;
2 This device must accept any interference received, including interference

that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna;

• Increase the separation between the equipment and receiver;

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected;

• Consult the dealer or an experienced radio/TV technician for help.
Saitek Industries, 2295 Jefferson Street, Torrance, CA90501, USA

Canada ICES-003

Operation is subject to the following two conditions:
1 This device may not cause interference, and;
2 This device must accept any interference, including interference that may

cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du

Canada.

Battery Information

• 2 AAArechargeable batteries (included)

• Must be disposed of properly

• May explode if damaged or disposed of in fire

• Do not short circuit

Importer's Declaration of Conformity

Authorised representatives address:
Saitek plc

4 West Point Row
Great Park Road
Almondsbury
Bristol
United Kingdom BS32 4QG

Identification of Equipment:

Saitek M100X Mini Wireless Mouse
Intended usage:

For home use
Conformity specification:

Reference to European harmonised standards
EN60950-1:2002
EN 300 220-3:2000
EN 301 489-3:2002
Technical Construction File Ref.: PCID/PM56

The above equipment conforms to the essential requirements of the following
directive:

PM56_manual.qxd 14/08/2008 14:25 Page 4

6 When returning the product for repair, please pack it very carefully,

preferably using the original packaging materials. Please also include an
explanatory note.

7 IMPORTANT: To save yourself unnecessary cost and inconvenience, please

check carefully that you have read and followed the instructions in this
manual.

This warranty is in lieu of all other expressed warranties, obligations or
liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITYAND FITNESS FOR APARTICULAR PURPOSE,
SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS
WRITTEN LIMITED WARRANTY. Some states do not allow limitations on
how long an implied warranty lasts, so the above limitations may not apply
to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not
allow the exclusion or limitation of special, incidental or consequential
damages, so the above limitation may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from
state to state.

This symbol on the product or in the instructions means that
your electrical and electronic equipment should be disposed
at the end of its life separately from your household waste.
There are separate collection systems for recycling in the
EU.

For more information, please contact the local authority or your retailer

where you purchased the product.

1999/5/EC EC Radio and Telecom Terminal Equipment directive
The essential requirements the above equipment conforms to are:
Article 3.1a (Safety)

Article 3.1b (EMC)
Article 3.2 (Use of radio spectrum)

Limitations of frequency usage:
Countries in which this product may not be sold/used:
Signed: Andrew Young
Position: Engineering Director
Date: 1 August 2008
Company: Saitek plc
Place: United Kingdom

Conditions of Warranty

1 Warranty period is 2 years from date of purchase with proof of purchase

submitted.
2 Operating instructions must be followed.
3 Specifically excludes any damages associated with leakage of batteries.

Note: Batteries can leak when left unused in a product for a period of time,

so it is advisable to inspect batteries regularly.
4 Product must not have been damaged as a result of defacement, misuse,

abuse, neglect, accident, destruction or alteration of the serial number,

improper electrical voltages or currents, repair, alteration or maintenance by

any person or party other than our own service facility or an authorized

service center, use or installation of non-Saitek replacement parts in the

product or the modification of this product in any way, or the incorporation of

this product into any other products, or damage to the product caused by

accident, fire, floods, lightning, or acts of God, or any use violative of

instructions furnished by Saitek plc.
5 Obligations of Saitek shall be limited to repair or replacement with the same

or similar unit, at our option. To obtain repairs under this warranty, present

the product and proof of purchase (eg, bill or invoice) to the authorized

Saitek Technical Support Center (listed on the separate sheet packaged with

this product) transportation charges prepaid. Any requirements that

conflict with any state or Federal laws, rules and/or obligations shall not be

enforceable in that particular territory and Saitek will adhere to those laws,

rules, and/or obligations.

!

1313

PM56_manual.qxd 14/08/2008 14:26 Page 6

Ein-/Ausschalten der Maus

Die Maus schaltet sich automatisch aus, wenn Sie neue Batterien
einlegen. Um bei Nichtverwendung der Maus Batteriestrom zu sparen,
drücken Sie den Ein-/Aus-Schalter auf der Unterseite und halten
Sie ihn 3-5 Sekunden lang gedrückt. Zum Einschalten der
Maus drücken Sie einmal auf den Schalter.

Die Maus-LED blinkt blau, um das Nachlassen der
Batterien anzuzeigen. In diesem Fall ersetzen Sie die
Batterien.

Fehlerbehebung

Falls die Maus nicht funktioniert:
1 Überprüfen Sie, dass die Batterien nicht leer sind und korrekt eingelegt

wurden.

2 Stellen Sie durch Drücken des Schalters auf der Unterseite der Maus sicher,

dass diese eingeschaltet ist.

3 Überprüfen Sie, dass der Nano-Empfänger korrekt an einen USB-Port Ihres

PC angeschlossen ist.

4 Schließen Sie den Nano-Empfänger an einen anderen USB-Port Ihres PC

an.

Wichtige Information

Manche Experten vertreten die Meinung, dass die Verwendung einer Maus oder
eines Trackballs unter Umständen zu ernsthaften Verletzungen der Hände,
Handgelenke, Arme, des Nackens oder Rückens führen kann. Falls Sie
Schmerzen, Gefühllosigkeit oder Schwäche in diesen Bereichen verspüren,
wenden Sie sich bitte sofort an einen Facharzt.

Um das Verletzungsrisiko reduzieren, befolgen Sie bitte folgende
Vorsichtsmaßnahmen:

• Legen Sie regelmäßig Pausen ein, stehen Sie auf und gehen Sie mehrmals
pro Stunde herum.

• Wechseln Sie Ihre Tätigkeiten im Lauf des Tages ab.

• Halten Sie Ihre Schultern entspannt, die Ellbogen sollten seitlich aufliegen.
Positionieren Sie Tastatur und Maus so, dass Sie sich nicht danach strecken
müssen.

• Passen Sie Stuhl und Tastatur so an, dass Ihre Oberarme und Handgelenke
gerade ausgerichtet sind.

SAITEK M100X MINI WIRELESS MOUSE

Systemkompatibilität

PC mit Windows XP/XP64/Vista/Mac OS X

Installation

1

2

3

4

5

6

Drücken Sie auf die
Klemme auf der Unterseite
der Maus.

Lösen Sie die
Batterieabdeckung.

Schieben Sie die
Abdeckung nach hinten,
um das Batteriefach
freizulegen.

Lösen Sie den drahtlosen
Nano-Empfänger.

Schließen Sie den
drahtlosen Nano­Empfänger an einen USB­Port Ihres PC an.
Befolgen Sie bei
eingeschaltetem PC die
Installationshilfe zur
Installation des neuen
USB-Geräts.

Legen Sie die Batterien in
der angezeigten Richtung
in das Batteriefach ein
und setzen Sie die
Abdeckung wieder auf.

PM56_manual.qxd 14/08/2008 14:26 Page 8