How it Works
Saitek
Loading...
C
D
E
G
H
I
J
K
M
N
O
P
Loading...
Loading...
Hi-Speed USB 2.0 Hub
User Manual
14 pgs56.43 Kb0

Saitek Hi-Speed USB 2.0 Hub User Manual

Hi-Speed
USB 2.0 Hub
USER MANUAL
MANUEL D’UTILISATION
BEDIENUNGSANLEITUNG
MANUALE D’USO
MANUAL DEL USUARIO
INTRODUCTION
Thank you for purchasing the Saitek Hi-Speed USB 2.0 Hub. This hub brings the latest in USB 2.0 technology to your PC or Mac® compatible computer. We hope it gives many hours of trouble-free use and high-speed data transfer convenience.
FEATURES
• Adds 4 USB 2.0 Hi-Speed ports to your PC*
• AC Power Supply included
• Simple ‘Plug and Play ’Install
• Compatible with all USB devices
• Over-current protection (per port) prevents damage to your computer and
peripherals
•
40 times faster connection speeds than USB 1.1 (480 Mbps data rate)
• LED illumination effects show port status
• Power-save switch
• Ideal for use with large digital data files (e.g., digital camera image downloads, etc)
* Note: If your computer does not support Hi-Speed USB 2.0 transfer rates, don’t worry, the Saitek USB 2.0 Hub will still transfer data at the optimum speed for your computer.
GETTING STARTED
1 Firstly, plug your hub’s power adapter into the power source, and then plug the
power adapter cable into the power socket on your USB hub and press the hub’s Power-save Button to turn it on. The On/Off light in the button will illuminate to show that the unit is receiving power.
2 Plug the Hi-Speed USB 2.0 Cable (the smaller mini-B type end) into the upstream
port of your Hi-Speed USB 2.0 Hub.
TROUBLESHOOTING
Q The Power-save Button is not illuminated and the hub and attached peripherals
are not working properly. What is wrong?
A Make sure that the AC adapter is plugged in properly and that the power cable is
firmly attached to the hub.
Q I have plugged a USB peripheral into a hub port and there is no light illuminated
and the peripheral is not working. What can I do?
A All USB peripherals need product drivers to function, so when you first attach the
USB peripheral to your hub, check to see if the computer automatically recognizes the product and loads the drivers or asks for an install CD.
TECHNICAL SUPPORT
Can’t get started – don’t worry, we’re here to help you!
Did you know that nearly all the products that are returned to us as faulty are not faulty at all - they have just not been installed properly?
So, if you experience any difficulty with this product, please visit our website or contact one of our friendly technical support staff who will be pleased to help you.
Our website www.saitek.com is designed to help you get the best performance from your Saitek product, and if you still have problems, we also have teams of product specialists around the world you can call for advice and support. Contact details are provided on the Technical Support Center list provided with this product. Saitek is dedicated to helping you enjoy your purchase – please call us if you have any difficulties or worries.
The Saitek Website
If you have access to an Internet connection, many of your technical queries may be answered with a simple visit to the Saitek Website at:
www.saitek.com
3 Plug the Hi-Speed USB 2.0 Cable (the larger type A end) into the computer’s Hi-
Speed USB 2.0 port and you will receive on-screen notification that the hub has been recognized and installed.
4 When the installation is complete, you can plug all kinds of USB peripherals into
your new Hi-Speed USB 2.0 Hub.
USING YOUR HI-SPEED USB 2.0 HUB
Hi-Speed Data Transfer
After you have successfully installed the Saitek Hi-Speed USB 2.0 Hub you can use it to simultaneously attach all manner of USB devices, such as digital cameras, scanners, PDAs, web cams, printers and mice. To really see and appreciate the difference in speed from your old 1.1 USB connection why not try transferring some large digital files from sources such as digital cameras – you’ll be amazed!
LED Port Status
To indicate that a USB device has been attached to your hub, the corresponding indicator light will illuminate and glow green to indicate a successful connection. Ared LED state shows an over-current situation, ie, the attached device is malfunctioning.
Power-save Switch
To save power when you are not using your USB peripherals, simply press the Power-save button in the center of your hub and the light will go out - indicating that the hub has powered down.
Adding more USB Hubs
If you want to add more USB peripherals to your computer, you can add more USB hubs to the Saitek Hi-Speed USB 2.0 Hub’s ports.
Federal laws, rules and/or obligations shall not be enforceable in that particular territory and Saitek will adhere to those laws, rules, and/or obligations.
5 When returning the product for repair, please pack it very carefully, preferably
using the original packaging materials. Please also include an explanatory note.
6 IMPORTANT: To save yourself unnecessary cost and inconvenience, please check
carefully that you have read and followed the instructions in this manual.
7 This warranty is in Lieu of all other expressed warranties, obligations or liabilities.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow the exclusion or limitation of special, incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
FCC Compliance and Advisory Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may
cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
The technical support area will provide you with all the information you need to get the most out of your product and solve any problems you might have.
Contacting Saitek
If you do not have access to the Internet, or if the website cannot answer your question, you will need to contact your local Saitek Technical Support Team.
At Saitek, we aim to offer comprehensive and thorough technical support to all of our users. So, before you call, make sure you have all the relevant details at hand.
To contact your local Saitek Technical Support Center, please look up the relevant contact details on the separate Technical Support Center sheet that came packaged with this product.
Conditions of Warranty
1 Warranty period is 2 years from date of purchase with proof of purchase
submitted. 2 Operating instructions must be followed. 3 Product must not have been damaged as a result of defacement, misuse, abuse,
neglect, accident, destruction or alteration of the serial number, improper electrical
voltages or currents, repair, alteration or maintenance by any person or party other
than our own service facility or an authorized service center, use or installation of
non-Saitek replacement parts in the product or the modification of this product in
any way, or the incorporation of this product into any other products, or damage to
the product caused by accident, fire, floods, lightning, or acts of God, or any use
violative of instructions furnished by Saitek plc. 4 Obligations of Saitek shall be limited to repair or replacement with the same or
similar unit, at our option. To obtain repairs under this warranty, present the
product and proof of purchase (e.g. bill or invoice) to the authorized Saitek
Technical Support Center (listed on the separate sheet packaged with this product)
transportation charges prepaid. Any requirements that conflict with any state or
INTRODUCTION
Félicitations pour l’achat du hub Saitek Hi-Speed USB 2.0. Ce hub vous apporte la dernière technologie USB 2.0 pour PC ou Mac®. Profitez d’une utilisation simple et d’une transmission de données supérieures !
CARACTERISTIQUES
• 4 ports USB 2.0 Hi-Speed supplémentaires*
• Adaptateur AC/DC
• Installation automatique via simple Plug & Play
• Compatible avec toutes sortes de périphériques USB
•
Protection contre surtension (par port) pour éviter des défauts sur les ordinateurs ou les périphériques
• 40 times plus vite que USB 1.1 (480 Mbps)
• Effets d’illumination montrent l’utilisation
• Système pour économiser de l’énergie
• Idéal pour l’utilisation avec des grands fichiers (ex., téléchargement des images)
* Note: Si votre ordinateur ne transmet pas en Hi-Speed USB 2.0, votre hub Saitek USB 2.0 Hub fonctionne quand même avec la vitesse optimale déterminée par votre ordinateur.
COMMENCER
1 D’abord, branchez l’adaptateur AC/DC sur une prise. Puis, connectez-le avec le
hub et appuyez la touche au milieu du hub pour l’allumer. La lampe ON/OFF
s’allume pour montrer que l’appareil est activé. 2 Branchez le câble Hi-Speed USB 2.0 sur le port Upstream de votre hub. 3 Branchez l’autre connectique du même câble sur un port USB de votre ordinateur.
L’installation s’effectue automatiquement et vous recevez un message indiquant
que le hub est installé.
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Saitek Industries, 2295 Jefferson Street, Torrance, CA90501, USA
Loading...
+ 9 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use