Cyborg_V1_manual.qxd 24/03/2009 14:36 Page 1
Saitek®
CYBORG TM V.1 FLIGHT STICK
USER MANUAL
BEDIENUNGSANLEITUNG
GUIDE D’UTILISATION
MANUALE D’USO
MANUAL DEL USUARIO
Cyborg_V1_manual.qxd 24/03/2009 14:36 Page 2
SAITEK CYBORG V.1 FLIGHT STICK
Fixing the stick legs to the base
1 |
2 |
Rotate the locking pins and pull them |
Insert the top of the leg unit into the base. |
out of the base. |
|
3 |
4 |
Press down firmly until the legs click into |
Insert the locking pins into the holes they |
place. |
were removed from and rotate to secure. |
|
2 |
Installation for users of Windows® XP, XP64 and Vista
Insert the Cyborg V.1 stick's USB cable into one of your PC's USB ports. Follow the device installation wizard to complete the installation of the new USB device to the system. You can test the controller at any time by clicking on Windows Start, Settings, Control Panel, Games Controllers.
Programming your Cyborg V.1 Flight Stick
The buttons and axes of your stick are all programmable using Saitek’s SST programming software. To download the software, go to www.saitek.com/uk/down/drivers.php, select the Cyborg V.1 Flight Stick from the drop-down menu and download software. Download the SST manual and follow the onscreen instructions to start programming.
Technical Support
Nearly all the products that are returned to us as faulty are not faulty at all - they have just not been installed properly.
If you experience any difficulty with this product, please first visit our website www.saitek.com. The technical support area will provide you with all the information you need to get the most out of your product and should solve any problems you might have.
If you do not have access to the internet, or if the website cannot answer your question, please contact your local Saitek Technical Support Team. We aim to offer quick, comprehensive and thorough technical support to all our users so, before you call, please make sure you have all the relevant information at hand.
To find your local Saitek Technical Support Center, please see the separate Technical Support Center sheet that came packaged with this product.
Conditions of Warranty
1.Warranty period is 2 years from date of purchase with proof of purchase submitted.
2.Operating instructions must be followed.
3.Specifically excludes any damages associated with leakage of batteries.
Note: Batteries can leak when left unused in a product for a period of time, so it is advisable to inspect batteries regularly.
4.Product must not have been damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized service center, use or installation of non-Saitek replacement parts in the product or the modification of this product in any way, or the incorporation of this product into any other products, or damage to the product caused by accident, fire, floods, lightning, or acts of God, or
any use violative of instructions furnished by Saitek plc. 3
Cyborg_V1_manual.qxd 24/03/2009 14:36 Page 4
5.Obligations of Saitek shall be limited to repair or replacement with the same or similar unit, at our option. To obtain repairs under this warranty, present the product and proof of purchase (eg, bill or invoice) to the authorized Saitek Technical Support Center (listed on the separate sheet packaged with this product) transportation charges prepaid. Any requirements that conflict with any state or Federal laws, rules and/or obligations shall not be enforceable in that particular territory and Saitek will adhere to those laws, rules, and/or obligations.
6.When returning the product for repair, please pack it very carefully, preferably using the original packaging materials. Please also include an explanatory note.
IMPORTANT: To save yourself unnecessary cost and inconvenience, please check carefully that you have read and followed the instructions in this manual.
This warranty is in Lieu of all other expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow the exclusion or limitation of special, incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.
FCC Compliance and Advisory Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and;
2.This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
4
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna;
-Increase the separation between the equipment and receiver;
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
-Consult the dealer or an experienced radio/TV technician for help.
Mad Catz, Inc, 7480 Mission Valley Rd, Suite 101, San Diego, CA 92108-4406
Canada ICES-003
Operation is subject to the following two conditions:
1.This device may not cause interference, and;
2.This device must accept any interference, including interference that may cause undesired
operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
5
Cyborg_V1_manual.qxd 24/03/2009 14:37 Page 6
SAITEK CYBORG V.1 FLIGHTSTICK
Anbringen der Füße am Flightstick
1 |
2 |
Die Arretierstifte drehen und aus der |
Oberseite des Fußes in die Basis |
Basis ziehen. |
einschieben. |
3 |
4 |
Fest hineindrücken, bis die Füße |
Die Arretierstifte in die Öffnungen einführen, |
einrasten. |
aus denen sie entfernt wurden, und zum |
|
Sichern drehen. |
|
6 |
Installation unter Windows® XP, XP64 und Vista
Das USB-Kabel des Cyborg V.1 Flightsticks in einen der USB-Anschlüsse Ihres PCs stecken. Das neue USB-Gerät gemäß dem Installationsassistenten installieren. Sie können den Controller jederzeit testen: Klicken Sie auf Windows Start, Einstellungen, Systemsteuerung, Gamecontroller.
Programmieren des Cyborg V.1 Flightsticks
Alle Tasten und Achsen Ihres Flightsticks können mit der Saitek SST-Programmiersoftware programmiert werden. Sie finden die Software unter www.saitek.com/uk/down/drivers.php. Wählen Sie den Cyborg V.1 Flightstick aus dem Dropdown-Menü und laden Sie die Software herunter. Laden Sie auch die SST-Bedienungsanleitung herunter und programmieren Sie Ihren Flightstick wie beschrieben.
Technischer Support
Probleme - keine Angst, wir lassen Sie nicht im Stich!
Wussten Sie, dass fast alle Produkte, die als fehlerhaft an uns zurückgeschickt werden, überhaupt nicht defekt sind? Sie wurden einfach nicht richtig installiert!
Sollten Sie Probleme mit diesem Produkt haben, besuchen Sie bitte zuerst unsere Website www.saitek.de. Unsere Website, speziell der Bereich Technischer Support, wurde erstellt, damit Sie von Ihrem Saitek-Produkt die bestmögliche Leistung erhalten.
Sollten Sie trotzdem noch Probleme haben oder kein Internetanschluss haben, dann stehen Ihnen unsere Produktspezialisten im Saitek Technical Support Team zur Verfügung, die Sie telefonisch um Rat und Hilfe bitten können.
Wir möchten, dass Sie viel Freude an Ihrem Gerät haben. Bitte rufen Sie uns an, falls Sie Probleme oder Fragen haben. Bitte stellen Sie auch sicher, dass Sie alle relevanten Informationen zu Hand haben, bevor Sie anrufen.
Rufnummern und Adressen finden Sie auf der mit dem Produkt gelieferten Liste der Zentren für Technischen Support.
Garantiebedingungen
1Die Garantiezeit beträgt 2 Jahre ab dem nachgewiesenen Kaufdatum.
2Die Bedienungsanleitung ist zu beachten.
3Schäden im Zusammenhang mit dem Auslaufen von Batterien sind spezifisch aus dem Garantieumfang ausgenommen.
Hinweis: Batterien können auslaufen, wenn sie über einen längeren Zeitraum ungenutzt in einem Gerät verbleiben. Es ist daher ratsam, die Batterien regelmäßig zu überprüfen.
4Die Garantie ist ausgeschlossen bei
Verunstaltung des Geräts, unsachgemäßer oder missbräuchlicher Benutzung, mangelnder
7
Loading...