easy InstallatIon
of your sagem
freesat+ recorder
Bringing you easy HD
3. Setting up freesat+
Step 1 – Switch on your TV
Step 2 – Switch on the Sagem box by pressing
the on/button
Step 3 – An initial installation screen will
appear Press
to start the installation
Step 4 – The recorder will search for the
satellite signal
Step 5 – Enter the full postcode (without any
spaces) using the alphanumeric keys on the
remote control for example to enter the letter
S, press the keypad number 7 four times
Use the
key to delete and correct
characters
Press
to continue
Step 6 – Follow the onscreen instructions
to personalise the box to your needs
Preferred Audio: Select your audio language
TV screen size: 16:9 or 4:3
HDMI Resolution: 1080i, 576p or 720p
Parental code: Set a parental control code
of your choice (default code is 0000)
Step 7 – The box will automatically start
searching for channels
1. Connecting the box
to the TV and the
Satellite Dish
Step 1 – Plug the satellite dish cables into the
SAT input connectors on the back of the box
Please note: To be able to watch a channel
and record another one at the same time,
you have to plug 2 SAT dish cables into the 2
SAT input connectors . Please speak to your
installer for further information
Step 2 – Plug the scart or HDMI cable into
the back of your box
Step 3 – Connect the scart or HDMI cable
into the back of your television
Step 4 – Connect the power cable into the
12V connector on the receiver and then plug
into the wall socket
2. Connecting to your Home
Cinema Equipment
Step 1 – Your Sagem freesat recorder can be
connected to your home cinema system. Use
the audio connections at the rear to connect
1 Step 1
2 Step 1
1 Step 2-3
1 Step 4
3 Step 2
On
3 Step 5
3 Step 6
Your box is now set up to start enjoying freesat+
Loading...