Sagem FREESAT+ User Manual

IN CASE YOU NEED TO CONTACT US

At Sagemcom we believe that a high quality product should come with the highest quality customer service.

In the design of this product we have taken great care to ensure the maximum quality possible and are sure that you will be delighted with your purchase.

However, in the rare event that you have any problems with the product and need advice or support you can be conﬁdent that we will do our best to help you.

Our dedicated technical helpdesk can be contacted from 09:00 – 17:00, Monday to Friday and will offer expert guidance on your product.

In the event of any trouble, please do not hesitate to call Sagemcom on:

08450 900 316

EASY INSTALLATION OF YOUR SAGEMCOM FREESAT+ RECORDER

Bringing you easy HD

253257179

1. Connecting the box to the TV and the satellite dish

Step 1 – Plug the satellite dish cables into the

SAT input connectors on the back of the box

Please note: To be able to watch a channel and record another one at the same time, you have to plug 2 SAT dish cables into the 2 SAT input connectors . Please speak to your installer for further information

Step 2 – Plug the scart or HDMI cable into

the back of your box

Step 3 – Connect the scart or HDMI cable

into the back of your television

Step 4 – Connect the power cable into the

12V connector on the receiver and then plug into the wall socket

1 Step 1

1 Step 2-3

1 Step 4

3. Setting up freesat+

Step 1 – Switch on your TV

Step 2 – Switch on the Sagemcom box by

pressing the on/button

Step 3 – An initial installation screen will

appear Press to start the installation

Step 4 – The recorder will search for the

satellite signal

Step 5 – Enter the full postcode (without any

spaces) using the alphanumeric keys on the remote control for example to enter the letter S, press the keypad number 7 four times

Use the key to delete and correct characters

Press to continue

Step 6 – Follow the onscreen instructions

to personalise the box to your needs

Preferred Audio: Select your audio language

TV screen size: 16:9 or 4:3

HDMI Resolution: 1080i, 576p or 720p

Parental code: Set a parental control code

of your choice (default code is 0000)

Step 7 – The box will automatically start

searching for channels

3 Step 2

3 Step 5

3 Step 6

2. Connecting to your Home Cinema Equipment

Step 1 – Your Sagemcom freesat recorder can

be connected to your home cinema system. Use the audio connections at the rear to connect

2 Step 1

Your box is now set up to start enjoying freesat+