Sagem FAST 1241 V2, FAST 1201 V2 User Manual
SAGEM F@stTM 1201/1241 V2
Quick Installation Guide
253156400-A_GIR 1201 V2 STD-gb.i1 1 14/10/2008 16:59:35
Contents
1 CONTENTS OF THE PACK .................................................2
2 CONNECTING YOUR MODEM ...........................................
3
2.1 CONNECTING YOUR ROUTER ..............................................................3
2.2 CONNECTING ADDITIONAL TELEPHONES .......................................... 3
3 INSTALLATION FROM THE CD-ROM ................................ 4
3.1 INSTALLATION ON THE ETHERNET PORT ........................................... 6
3.2 INSTALLATION ON THE USB PORT.......................................................7
3.3 REINSTALLING OR UNINSTALLING YOUR MODEM ............................8
4 TROUBLESHOOTING .........................................................9
4.1 STATUS OF THE LEDS ON THE FRONT ...............................................9
4.2 MODEM SUPERVISION ........................................................................10
4.3 «DIAGNOSTICS» TOOL ........................................................................ 11
5 SAFETY INSTRUCTIONS .................................................13
5 SAFETY INSTRUCTIONS (CONTD.) ................................
14
253156400-A_GIR 1201 V2 STD-gb.i2 2 14/10/2008 16:59:35
SAGEM F@st™ 1201/1241 V2
1
Sagem Ciomlmunications thanks you for choosing the range of SAGEM F@stTM
1201/1241 V2 modems while hoping that it will provide you with full satisfaction.
SAGEM F@st
TM
1201 V2 and SAGEM F@stTM 1241 V2 products adapt the ADSL func-
tion respectively on POTS (ITU G.992.1/3/5 - Appendix A) and on ISDN (ITU G.992.1/3/5
- Appendix B).
SAGEM F@st
TM
1201 V2 and SAGEM F@stTM 1241 V2 equipment include an Ethernet
interface (ETH) and an USB interface.
SAGEM F@stTM 1201 V2 and SAGEM F@stTM 1241 V2 products can be provided in
«Bridged» or «Routed» version according to the ISP.
In addition, this modem will provide you with access to all the services provided by your
ISP (Internet Service Provider), as shown in the diagram below.
List of symbols used in this guide
Warns you about an action or a serious omission.
Provides you with important information you must take into account.
Presentation
253156400-A_GIR 1201 V2 STD-gb.i3 3 14/10/2008 16:59:45
SAGEM F@st™ 1201/1241 V2
2
1 CONTENTS OF THE PACK
Before you start the installation make sure that the pack contains the following items:
Contents of the pack
Note: The modem can be either in white or black colour.
253156400-A_GIR 1201 V2 STD-gb.i4 4 14/10/2008 16:59:47
SAGEM F@st™ 1201/1241 V2
3
Make sure that the modem is not connected to your computer before you start
the installation from the CD-ROM.
2 CONNECTING YOUR MODEM
Connection
Follow the procedure according to the stages described in the CD-ROM installation and
connect your telephone in accordance with the drawing below:
2.2 CONNECTING ADDITIONAL TELEPHONES
Make the connections according to the diagram opposite.
2.1 CONNECTING YOUR ROUTER
253156400-A_GIR 1201 V2 STD-gb.i5 5 14/10/2008 16:59:48
4
SAGEM F@st™ 1201/1241 V2
3 INSTALLATION FROM THE CD-ROM
Make sure that the modem is not connected to your computer before you start
the installation from the CD-ROM.
The installation procedure described below was undertaken in Windows VistaTM.
Installation in other Windows® (98, ME, 2000 and XP) can be slightly different.
insert the CD-ROM into the
relevant drive; the screen oppo
-
site will appear:
click on Next.
Installation from the CD-ROM
The screen opposite describes
the precautions to be taken
during the installation.
click on Next.
253156400-A_GIR 1201 V2 STD-gb.i6 6 14/10/2008 16:59:51
Loading...