Ryobi RPS1201 Original Instructions Manual

RPS1201

ORIGINAL INSTRUCTIONS

Cordless 12V Palm Sander

Important!

It is essential that you read the instructions in this manual before operating
this machine.

Subject to technical modifications.

Safety

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure

to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool’’ in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause
you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will
increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords

increase the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and

use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while

operating power tools may result in serious
personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with

your finger on the switch or energising power tools
that have the switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control
of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure
these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the
rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool
before making any adjustments, changing
accessories or storing power tools. Such

preventive safety measures reduce the risk of
starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

1

Safety

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc, in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool

for operations different from those intended could
result in a hazardous situation.

5) BATTERY TOOL USE AND CARE

a) Recharge only with the charger specified by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of fire
when used with another battery pack.

b) Use power tools only with specifically

designated battery packs. Use of any other
battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together

may cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause

irritation or burns.

6) SERVICE

a) Have your power tool serviced by a qualified

repair person using only identical replacement
parts. This will ensure that the safety of the power

tool is maintained.

SPECIAL SAFETY RULES

WARNING

The product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the product by a person responsible
for their safety.

Children should be supervised to ensure that they do not
play with the product.

■ Always wear safety goggles and a dust mask when

sanding, especially sanding overhead.

■ A suitable breathing respirator must be worn while

sanding lead paint, some woods and metal to avoid
breathing the harmful/toxic dust or air.

■ Do not throw sanding dust on an open fire because

materials in fine particle form may be explosive.

■ The machine is not suitable for wet sanding.

■ Do not use sanding paper larger than needed. Extra

paper extending beyond the sanding pad can also
cause serious lacerations.

■ When not in use, all tools should be disconnected from

power source.

■ Caution, fire hazard! Avoid overheating the object being

sanded as well as the sander. Always empty the dust
collector before taking breaks.

■ Protect the battery against heat (e.g., continuous

intense sunlight and fire), water, and moisture.

■ Properly dispose of dropped or damaged battery

immediately.

INTENDED USE

Dry sanding and polishing wood, filler, and coated surfaces.

MAINTENANCE

■ When servicing, use only identical replacement parts.

Use of any other parts may create a hazard or cause
product damage.

■ Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.

■ Always wear safety goggles or safety glasses with side

shields during power product operation or when blowing
dust. If operation is dusty, also wear a dust mask.

■ To avoid serious personal injury, always remove

the battery pack from the product when cleaning or
performing any maintenance.

■ Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.

■ Only the parts shown on the parts list are intended to

be repaired or replaced by the customer. All other parts
should be replaced at an authorized service center.

LED INDICATORS

Battery charge LED colour

66% - 100% Green + Yellow + Red

33% - 66% Yellow + Red

< 33% Red

NOTE: If the red LED indicator is flashing, it means the
battery power is low. The battery needs to be recharged.

2