Ryobi Outdoor PLT3043A, RY70101A User Manual

OPERA TOR’S MANUAL Trimmer PLT3043A RY70101

Your new trimmer has been engineered and manufactured to Ry obi’s high standard for dependability , ease of operation and operator safety. Properly cared for , it will give y ou years of rugged, trouble-free perf ormance.

WARNING: To reduce the risk of injury , the user must read and understand the operator’s man ual.

Thank you for b uying a Ry obi trimmer .

SA VE THIS MANUAL FOR FUTURE REFERENCE

TABLE OF CONTENTS

Q Safety.....................................................................................................................................................................2 - 3

Q Symbols .................................................................................................................................................................4 - 5

Q T echnical Data............................................................................................................................................................. 5

Q Unpacking ................................................................................................................................................................... 6

Q Features ...................................................................................................................................................................... 6

Q Assembly .................................................................................................................................................................... 7

Q Operation.............................................................................................................................................................. 8 - 10

Q Maintenance ....................................................................................................................................................... 11 - 13

Q Troubleshooting................................................................................................................................................... 14 - 15

Q Warranty .................................................................................................................................................................... 16

Q Safety Directive......................................................................................................................................................... 16

SAFETY

W ARNING:

Do not attempt to operate this trimmer until you have read thoroughly and understand completely all instructions, safety rules etc contained in this manual. Failure to comply may result in accidents involving fire, electric shock or serious personal injury. Save operator’s manual and review frequently for continuing safe operation, and instructing others who may use this tool.

Q Clear the work area before each use. Remove all objects

READ ALL INSTRUCTIONS

GENERAL SAFETY RULES

Q For safe operation, read and understand all instructions

before using the trimmer. Follow all safety instructions. Failure to follow all safety instructions listed below may result in serious personal injury.

Q Do not allow children or untrained individuals to use

this unit.

Q Never start or run the engine in a closed or poorly

ventilated area; breathing exhaust fumes can kill.

such as stones, broken glass, nails, wire or string which may be thrown or become entangled in the string head.

Q Wear full eye and hearing protection while operating

this unit.

Q Wear heavy long trousers, boots and gloves. Do not

wear loose-fitting clothing, shorts, jewellery of any kind, or go barefoot.

SAFETY

Q Secure long hair so it is above shoulder level to prevent

entanglement in any moving parts.

Q Keep all bystanders, children and pets at least 15 m

(50 ft) away.

Q Do not operate this unit when you are tired, ill or under

the influence of alcohol, drugs or medication.

Q Do not operate in poor lighting.

QQ QQ

Q Keep firm footing and balance. Do not overreach.

Overreaching may result in loss of balance or exposure to hot surfaces.

Q Keep all parts of your body away from any moving part.

QQ QQ

Q Do not touch areas round the silencer or cylinder of the

trimmer: these parts get hot from operation.

Q Always stop the engine and remove the sparking plug

wire before making any adjustments or repairs except for carburettor adjustments.

Q Inspect the unit before each use for loose fasteners,

fuel leaks etc. Replace any damaged parts before use.

Q The string head will rotate during carburettor

adjustments.

Q It has been reported that vibrations from hand-held tools

may contribute to a condition called Raynaud’s Syndrome in certain individuals. Symptoms may include tingling, numbness and blanching of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking and work practices are all thought to contribute to the development of these symptoms. It is unknown at present what, if any, vibrations or extent of exposure may contribute to the condition. There are measures that can be taken by the operator to possibly reduce the effects of vibration:

a) Keep your body warm in cold weather. When

operating the unit wear gloves to keep the hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud’s Syndrome.

b) After each period of operation, exercise to increase

blood circulation.

c) Take frequent work breaks. Limit the amount of

exposure per day.

d) Keep the tool well maintained, fasteners tightened

and worn parts replaced.

If you experience any of the symptoms of this condition, immediately discontinue use and see your physician about these symptoms.

Q Mix and store fuel in a container approved for petrol.

QQ QQ

Q Mix fuel outdoors where there are no sparks or flames.

Wipe up any fuel spillage. Move 9 m (30 ft) away from refuelling site before starting engine.

Q Stop the engine and allow to cool before refuelling or

storing the unit.

Q Allow the engine to cool; empty the fuel tank and secure

the unit from moving before transporting in a vehicle.

SPECIFIC SAFETY RULES FOR TRIMMER USE

Q Replace string head if cracked, chipped or damaged in

any way. Be sure the string head is properly installed and securely fastened. Failure to do so can cause serious injury.

Q Make sure all guards, straps, deflectors and handles are

properly and securely attached.

Q Use only the manufacturer’s replacement string in the

cutting head. Do not use any other cutting attachment.

Q Never operate unit without the grass deflector in place

and in good condition.

Q Maintain a firm grip on both handles while trimming.

Keep string head below waist le v el. Ne v er cut with the string head located over 76 cm (30 in) or more above the ground.

SYMBOLS

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.

Proper interpretation of these symbols will allow you to operate the tool better and more safely.

SYMBOL NAME EXPLANATION

Safety Alert Symbol Indicates danger, warning or caution. It means

attention!!! Your safety is involved.

Read Your Operator’s Manual Your manual contains special messages to bring

attention to potential safety concerns as well as operating and servicing information. Please read all the information carefully to ensure satisfaction and safe use.

Wear eye and hearing protection Wear eye and hearing protection when operating this

equipment.

Keep bystanders away Keep all bystanders at least 15 m (50 ft) away.

Ricochet Danger of Ricochet.

9,000

No blade Do not install any type of blade on this unit.

RPM Decal Rotational direction and maximum speed of the shaft

-1

min

for the cutting attachment.

Boots Wear non-slip safety footwear when using this

equipment.

Gloves Wear non-slip, heavy-duty gloves.

No Smoking Do not smoke when mixing fuel or filling fuel tank.

Petrol Use unleaded petrol intended for motor vehicle use

with an octane rating of 87 ([R + M] / 2) or higher.

Oil Use 2-cycle oil for air-cooled engines.

Mix Petrol and Oil Mix the fuel mix thoroughly and also each time before

fuelling.

Switch On/Off Switch

I = ON to Run O = OFF to Stop

SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in

serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury. It may also be used to alert against unsafe practices that may cause property damage.

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.

SAVE THESE INSTRUCTIONS

TECHNICAL DA TA

Weight Without fuel and string head ................................................................................................................4.48 Kg

Without fuel with string head ...............................................................................................................4.67 Kg

Fuel tank volume ................................................................................................................................................... 42.5 cm

Cutting swath.......................................................................................................................................................... 432 mm

Engine displacement ................................................................................................................................................ 30 cm

Maximum engine performance (in accordance with ISO 8893) ............................................................................... 0.78 kW

Maximum rotational frequency of the spindle .................................................................................................... 9,000/min

Engine Speed (rotational frequency) at recommended max. spindle rotational frequency.................................12,500/min

Engine speed (rotational frequency) at idle .............................................................................................3,100 - 4,300/min

Fuel consumption (in accordance with ISO 8893) at max. engine performance................................................... 0.52 kg/h

Specific fuel consumption (in accordance with ISO 8893) at max. engine performance ...................................... 0.47 kg/h

Vibration level idling Front Handle ......................................................................................................................... 4.8

Rear Handle .......................................................................................................................... 4.3

Vibration level racing Front Handle ......................................................................................................................... 7.1

Rear Handle .......................................................................................................................... 9.0

Sound pressure level (in accordance with EN ISO 11806:1997, ISO 7917:1987) .......................................................... 100

Sound power level (in accordance with ISO 10884) ....................................................................................................... 113

-1

UNPACKING

INSTRUCTIONS

Q Carefully remove the product from the carton.

QQ QQ

Q Inspect the product to make sure no breakage or

damage occurred during carriage.

Q Do not discard the packing material until you have

inspected and operated the product.

FEATURES

SILENCER

GUARD

THROTTLE CONTROL

AND REAR HANDLE

IGNITION SWITCH

PACKING LIST FOR OWNER’S KIT

Q Grass deflector

QQ QQ

Q Front handle

QQ QQ

Q Silencer guard, torque wrench and screws

QQ QQ

Q Fixings

QQ QQ

Q Operator’s manual

CHOKE LEVER

STARTER GRIP

FRONT HANDLE

THROTTLE TRIGGER

DRIVE SHAFT

HOUSING

GRASS DEFLECTOR

STRING HEAD

Fig. 1

+ 12 hidden pages