Ruckus Wireless VX211X User Manual

VX2110 User Manual

Ruckus Wireless, Inc.

880 W. Maude Ave.

Sunnyvale, CA 94085

1.0 Introduction

The Ruckus Wireless VX2110 is an 802.11b/g wireless module operating in
the 2.4 GHz band. It is designed to operate as a slave device to a USB host
processor, and is compatible with the USB 1.1 and 2.0 specifications.

2.0 User Information

Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment (per
FCC Part 15.21).

3.0 RF Exposure

As a mobile and fixed RF device, this device must have at least 20cm
separation from the user

.

4.0 Operation

Plug the mini-B plug into the VX2110. Then plug the other end of the USB
cable into the host. The LED on the VX2110 will light indicating that the
driver is loaded and the device has power. The remaining steps in setting up
the mode of operation will depend on the type of host operating system used
and the application software.