Page 1
1
DipSlide Incubator EM4
KK43.1
Lightweight, small incubator specially designed for DipSlides. With transparent, easily removable cover for
quick insertion and removal of DipSlides. Easy to operate, even for inexperienced users. A stand insert and
a thermometer are also supplied. Also usable without a stand for incubation of Petri dishes and contact
plates.
Technical Data
Capacity
4 l
Inner dimensions W x H x D
180 x 125 x 180 mm
Outer dimensions W x H x D
230 x 180 x 230 mm
Capacity
23 DipSlides
Temperature range
Room temperature to 44 °C
Weight
1,5 kg
Power supply
220 V, 25 W
Operation
- Plug the main plug into a 230 V~ socket
- Ideal room temperature: approx. 20 °C
- The temperature of the case is set to 36 °C ± 1 °C
- This temperature can be corrected with the screw on the side of the incubator
- Do not exceed 45 °C
- When the incubator heats up, the red LED lights up
- A control lamp (red LED) confirms the correct function of the incubator
- Clean with a cloth if necessary
- Only use the unit dry! Do not fill with water!
Delivery content
- Screwable cover fastener/plate
- Frame for 23 DipSlides/tubes plus thermometer
- Control thermometer
DipSlide Incubator EM4
KK43.1 1 unit
Instructions for use
Carl Roth GmbH + Co. KG
Schoemperlenstraße 3-5 • 76185 Karlsruhe
P.O. Box 100121 • 76231 Karlsruhe
Phone: +49 (0) 721/ 5606-0
Fax: +49 (0) 721/ 5606-149
[email protected] • www.carlroth.com sse 06/2021
The company is a limited partnership with headquarters in Karlsruhe, reg. court
Mannheim HRA 100055. Roth Chemie GmbH, with headquarters in Karlsruhe, reg.
court Mannheim HRB 100428, is the personally liable partner. Chairman of the
Board: Eberhard Gaul; Managing Director: André Houdelet. Sales tax identification
number: DE 143621073.
Loading...