Rotel RMB-1512 User Manual

RMB-1512

12-Channel Custom Installation Amplier

Description

No longer do you need to purchase several large ampliers to obtain a high performance multizone audio system. The RMB-1512

features an advanced Class D design that provides plenty of power (12 x 100 watts into 8 ohms) for the most demanding mulitzone

audio systems, but never runs the danger of overheating itself or other electronic components placed in the same vicinity. The RMB-

1512 features everything needed for remote operation and custom installation including 12 volt trigger signal sensing, input bussing,

sum-to-mono, buffered link output, front panel attenuation control, ve-way binding posts and screw terminals.

*Note – all Rotel 15 series components may be rack mounted and remotely controlled via RS-232, IR, or 12 volt (depending on model) for complete
stealth operation.

Specications

Power Output

all channels driven

IM Distortion

Damping Factor (8 ohms)

Input Sens. / Impedance

100 watts x 12ch (20 Hz-20kHz, <0.03% THD, 8 ohms)
200 watts x 12ch (20 Hz-20kHz, <0.03% THD, 4 ohms)

<0.02%

>200

1.25 V/9.9 k Ohms

Frequency Response (±1 dB)

S/N Ratio (IHF A)

Dimensions (W x H x D) mm

Dimensions (W x H x D) in

10Hz-40kHz (+3dB)

109 dB

431 x 144 x 407 mm

3U / 17 x 5 5/8 x 16 in

The Rotel Co. Ltd.

10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan

Rotel of America

54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]

www.rotel.com

Rotel Europe

Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]