Rotel RMB-1075 Brochure

RMB 1075

High Current Five Channel Amplier

Description

This multi-channel power amplier delivers 120 watts (all channels driven), thanks to a power supply composed of a gener-

ous 1,500 VA toroidal transformer and eight 10,000 μf British-made Slit Foil capacitors. 20 output devices, each of which is

rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous

headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as

the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited

for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input

and output jacks make this amplier well suited for fully integrated systems with total remote control capability.

Specications

Power Congurations: 5 x 120 watts

Watts/Channel

120 watts

all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,

0.06% THD

THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel

0.03%, maximum

0.03%, maximum

0.05%, maximum

IM Distortion (at rated ower, 60Hz:7kHz = 4:1) 0.03%, maximum

Damping Factor (8 ohms) 180

Input Sens. / Impedance 1.0V / 27 kohms

Frequency Response 15-100kHz (=0.5, -3dB)

S/N Ratio (IHF A) 115dB

Power Consumption 800 watts

Dimensions (W x H x D) 433 x 189 x 380 mm

1

/8 x 7 1/2 x 15"

17

Front Panel Height

176 mm, 6.9"

Weight (net) 17 kg / 37.4 lbs

The Rotel Co. Ltd.

10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan

Rotel of America

54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]

www.rotel.com

Rotel Europe

Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]