Rosemount SSK-5 and UN-MK-3 Sunshade and Universal Mounting Kit Manuals & Guides

Instruction Guide

Figure 1 Typical mounting of UN MK 3X with housing enclosure to a vertical pole

MAN-0123

June 2016

Sunshade Assembly & Universal mounting
kit

SSK-5 series & UN-MK-3 series

Net Safety has specially designed the SSK-5(SSK-5X) series sunshade assembly and t he UN­MK-3(UN-MK-3X) series mounting bracket for the millennium transmitter and junction box
enclosures. The UN-MK-3 series mounting br acket is to assist in firmly mounting housing
enclosures in different co nfigurations depending on installation needs. The 3 different
types of UN-MK-3X are; the UN-M-31, UN-MK-32 and UN-MK-33. All three mounting
brackets are simil ar , except for the size U bolt each uses. The UN-MK-31 comes with a 3/8
x 1” U bolt, the UN-MK-32 uses a 3/8 x 2” U bolt and the UN-MK-33 has a 3/8 x 3” U bolt.

Steps in mounting UN-MK-3X to a vertical pole

Torque should be less than 2-4 ft .lbs when tightening nuts.

1. Position the UN-MK-3X with its ‘V’ slot making contact with the specific pole. See
figures on next page.

2. Place U bolt around pole and fit to mounting bracket. Ensure U bolt threaded ends
pass through two (

3. Fit screws, washer s and nuts provided to the threaded ends of the U bolt. Ensure a
*tight fit with appropriate tools (

13/32”) slots on mounting bracket.

9/16” open ended wrench, 9/16” socket).

Steps in mounting SSK-5X to a vertical pole Instruction Guide

2 Steps in mounting SSK-5X to a vertical pole

Figure 2 Typical mounting of the S S K-5 X with UN-MK-3X to a vertical pole

June 2016 MAN-0123

4. Align housing enclosure mounting holes with the two (17/64”) screw slots on the
UN-MK-3. Position two ¼” screws in slots and with the aid of scre ws and
appropriate tools (

The sunshade assemb l y (SSK-5X) series is designed to provide shade for housing
enclosures that are continuously exposed to direct sunlight, which may result in very high
temperature exposure. T he assembly comprises a sunshade and a mou nt i ng b r acket. The
three types of sunshade assembly availabl e ar e: SSK-51, SSK-52 and SSK-53; the SSK-51 is
used when mounting to a 1” pipe, the SSK-52 is for a 2” pipe and the SSK-53 is for a 3”
pipe.

7/16” open ended wrench, 7/16” socket) ensure a *tight fit.

Steps in mounting SSK-5X to a vertical pole

1. Assemble the sunshade kit; using screws, washers and nuts prov i d e d , fit the
sunshade to its mounting bracket with th e ai d o f appropriate tools (
ended wrench,

2. Position completed sunshade ki t assembly above the transmitter (or junction box)
enclosure. With U bolt in position around the pole, ensure its threaded ends pass
through the (

3. Adjust the positioning of the assembly to cover housing enclosure. *Tighten with
appropriate tools (

Various mounting orientations are allowed when using the UN-MK-3 series mounting
bracket and the SSK-3 se r i e s sunshade kit. The typ e o f set up will depend on installation
requirements. See Figure 3below.

7/16” socket).

13/32”) slots of mounting bracket. See Figure 3 below (orientation B).

9/16” open ended wrench, 9/16” socket).

7/16 open

Instruction Guide Steps in mounting SSK-5X to a vertical pole

Steps in mounting SSK-5X to a vertical pole 3

Figure 3 Various mounting orientations

MAN-0123 June 2016

Figure 4 UNMK-3X & SSK-5X dimen sional drawing

Figure

5 UNMK-3X with SSK-5X parts list

EmersonProcess.com/FlameGasDetection

AnalyticExpert.com

youtube.com/user/RosemountAnalytical

twitter.com/Rosemount_News
facebook.com/Rosemount

Emerson Process Management

6021 Innovation Blvd.
Shakopee, MN 55379
T [phone]
F + 952 949 7001
[e-mail]

©2016 Emerson Process Management. All rights reserved.

The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount is a mark
of one of the Emerson Process Management family of companies. All other marks are property
of their respective owners.

The contents of this publication are presented for information purposes only, and, while effort
has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their use
or applicability. All sales are governed by our terms and conditions, which are available on
request. We reserve the right to modify or improve the designs or specifications of our products
at any time without notice.