Rosemount 3051SFC, 2051CFC, 2051CFP, 1195 Specifications

Product Data Sheet

00813-0100-4485, Rev GA

Rosemount™ DP Flowmeters and Primary Elements

February 2017

 Multivariable capabilities allow for real-time fully compensated mass and energy flow

 Fully-Integrated wireless flowmeters allow for easy installation

 Minimize permanent pressure loss and save energy with Rosemount Annubar

Te ch no lo gy

 Reduce straight pipe requirements to two diameters upstream and downstream from most flow

disturbances with Conditioning Orifice Technology

 Improve accuracy and repeatability in small line sizes with Integral Orifice Plate Technology

™

Averaging Pitot Tube

Rosemount DP Flow

February 2017

Contents

DP Flowmeter Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 5

Rosemount 3051SF DP Flowmeters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8

Rosemount 3051SFA Annubar Flowmeter ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 8

Rosemount 3051SFC Compact Orifice Flowmeter ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 19

Rosemount 3051SFP Integral Orifice Flowmeter ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 27

Performance specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 36

Dynamic performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 37

Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 39

Physical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 44

Rosemount 3051SF Wireless Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 46

Rosemount 3051CF Flowmeter Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 61

Rosemount 3051CFA Annubar Flowmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 61

Rosemount 3051CFC Compact Flowmeter ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 70

Rosemount 3051CFP Integral Orifice Flowmeter ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 76

Performance specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 83

Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 85

Physical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 89

Rosemount 3051 Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 91

Additional Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 96

Rosemount 2051CF Flowmeter Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 99

Rosemount 2051CFA Annubar Flowmeter ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 99

Rosemount 2051CFC Compact Flowmeter ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 107

Rosemount 2051CFP Integral Orifice Flowmeter ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . page 113

Performance specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 119

Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 120

Physical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 124

Rosemount 2051 Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 126

Rosemount 485 Annubar Primary Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 134

Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 134

Performance specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 140

Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 140

Physical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 141

Rosemount 585 Annubar Primary Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 145

Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 145

Performance specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 151

Emerson.com/Rosemount

February 2017

Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 151

Physical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 152

Rosemount 405 Compact Primary Element. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 154

Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 154

Performance specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 157

Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 157

Physical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 158

Rosemount 1595 Conditioning Orifice Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 161

Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 161

Performance specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 164

Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 164

Physical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 164

Rosemount 1195 Integral Orifice Primary Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 166

Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 166

Performance specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 170

Rosemount DP Flow

Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 170

Physical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 172

Rosemount 1495 Orifice Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 174

Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 174

Rosemount 1496 Orifice Flange Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 178

Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 178

Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 182

Physical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 183

Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 195

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

DP Flowmeter Selection Guide

Rosemount integrated DP Flowmeters arrive fully assembled, configured, and leak tested for out-of-the-box installation.

Rosemount 3051SF Flowmeters enable best-in-class flow measurement utilizing advanced functionality

 Up to 0.80 percent mass flow rate accuracy

 Multivariable capabilities allow for real time fully compensated mass and energy

flow

 Advanced diagnostics predict and prevent abnormal process conditions

 Installation ready wireless flow solution

 Ultra for Flow measures percent-of-reading performance over 14:1 flow turndown

 15-year stability, 15-year warranty

 SIL3 Capable: IEC 61508 certified by an accredited 3rd party agency for use in

safety instrumented systems up to SIL 3 (minimum requirement of single use [1oo1] for SIL 2 and redundant use [1oo2] for SIL 3)

 Available with 4–20 mA HART

, WirelessHART, and FOUDATION™ Fieldbus Protocols

Rosemount 3051CF Flowmeters combine the proven 3051C Pressure Transmitter and the latest primary element technology

 Up to 1.65 percent volumetric flow accuracy at 8:1 turndown

 Available with HART, WirelessHART, FOUNDATION Fieldbus, and PROFIBUS

 10-year stability

 SIL3 Capable: IEC 61508 certified by an accredited 3rd party agency for use in safety

Protocols

instrumented systems up to SIL 3 (minimum requirement of single use [1oo1] for SIL 2 and redundant use [1oo2] for SIL 3)

Rosemount 2051CF Flowmeters combine the 2051C Pressure Transmitter and the latest primary element technology

 Up to 2.00% volumetric flow accuracy at 5:1 turndown

 Available with HART, WirelessHART, and FOUNDATION Fieldbus Protocols

 3-year stability

Emerson.com/Rosemount

February 2017

Rosemount Annubar Primary Element Technology

 Energy savings gained through minimal permanent pressure loss

 Innovative T-shape design providing accuracies up to ±0.75 percent of flow rate

(Rosemount 485 Annubar Primary Element)

 Variety of sensor materials for optimal compatibility with the process fluid

 Handles applications where conditions exceed the structural limitations of

other primary elements

 Symmetrical sensor design allows bi-directional flow measurement (Rosemount 585

Annubar Primary Element)

 Rosemount 405A Compact Annubar primary element easily installs like an orifice plate

 Integral thermowell allows temperature measurement without additional pipe

penetrations for Rosemount 485, 585, and 405A models.

Rosemount Conditioning Orifice Plate Technology

 Reduce straight pipe requirements to two diameters upstream and

downstream from most flow disturbances

 Discharge coefficient uncertainty as low as ±0.5 percent

 Integral thermowell allows temperature measurement without an additional pipe

penetration with the compact design

 Reduce installation costs compared to traditional orifice plates with the

compact design

 Conditioning orifice plate is based on AGA, ASME, and ISO industry

standards

 Available in various plate styles providing installation flexibility

Rosemount DP Flow

Rosemount Integral Orifice Plate Technology

 Improves accuracy and repeatability in

 Self-centering plate design eliminates installation errors that are magnified in

/2-in., 1-in., and 11/2-in. line sizes

small line sizes

 Precision honed pipe sections allow accuracy of up to ±0.75 percent of flow rate

 Installation flexibility with numerous process connections

 Integral thermowell allows temperature measurement without an additional pipe

penetration

Emerson.com/Rosemount

February 2017

Rosemount 3051SFP

Rosemount 3051SFC

Rosemount 3051SFA

Rosemount 3051SF DP Flowmeters

Rosemount 3051SF Flowmeters integrate industry leading transmitters with industry leading primary elements. Capabilities include:

 Flowmeters are factory configured to meet your application needs (Configuration Data

Sheet required)

 Multivariable capabilities allow scalable flow compensation (measurement types 1–4)

 4–20 mA HART, WirelessHART, and FOUNDATION Fieldbus Protocols

 Ultra for Flow for improved flow performance across wider flow ranges

 Integral temperature measurement (option code T)

 Advanced diagnostics (option code DA2)

 Direct or remote mount configurations available

Additional information

Specifications: page 34 Dimensional Drawings: page 195

Rosemount 3051SFA Annubar Flowmeter ordering information

Rosemount DP Flow

 Rosemount Annubar Flowmeters reduce permanent pressure loss by creating less blockage in the pipe.

 Ideal for large line size installations when cost, size and weight of the flowmeter are concerns.

Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See page 42 for more information on material selection.

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Measurement

Model Product description

typ e

• = Available — =Unavailable

D 1-7

3051SFA Rosemount Annubar Flowmeter • •

Measurement type

2 Compensated flow calculations – Differential and static pressures — • ★

3 Compensated flow calculations – Differential pressure and temperature — • ★

4 Compensated flow calculations – Differential pressure — • ★

D Differential pressure • — ★

6 Process variables only (no flow calculations) – Differential and static pressures — • ★

7 Process variables only (no flow calculations) – Differential pressure and temperature — • ★

Fully compensated mass and energy flow calculations – Differential and static pressures with temperature

Process variables only (no flow calculations) – Differential and static pressures with temperature

— • ★

Fluid type

L Liquid • • ★

G Gas • • ★

S Steam • • ★

Emerson.com/Rosemount

Rosemount DP Flow

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

February 2017

Line size

020 2-in. (50 mm) • • ★

025 21/2-in. (63,5 mm) • • ★

030 3-in. (80 mm) • • ★

035 31/2-in. (89 mm) • • ★

040 4-in. (100 mm) • • ★

050 5-in. (125 mm) • • ★

060 6-in. (150 mm) • • ★

070 7-in. (175 mm) • • ★

080 8-in. (200 mm) • • ★

100 10-in. (250 mm) • • ★

120 12-in. (300 mm) • • ★

140 14-in. (350 mm) • •

160 16-in. (400 mm) • •

180 18-in. (450 mm) • •

200 20-in. (500 mm) • •

240 24-in. (600 mm) • •

300 30-in. (750 mm) • •

360 36-in. (900 mm) • •

420 42-in. (1066 mm) • •

480 48-in. (1210 mm) • •

600 60-in. (1520 mm) • •

720 72-in. (1820 mm) • •

780 78-in. (1950 mm) • •

840 84-in. (2100 mm) • •

900 90-in. (2250 mm) • •

960 96-in. (2400 mm) • •

Pipe I.D. range (see “Pipe I.D. range code for Rosemount Annubar Flowmeters and Primary Elements” on page 143)

C Range C from the pipe I.D. table • • ★

D Range D from the pipe I.D. table • • ★

A Range A from the pipe I.D. table • •

B Range B from the pipe I.D. table • •

E Range E from the pipe I.D. table • •

Z Non-standard pipe I.D. range or line sizes greater than 12-in. (300 mm) • •

Pipe material/mounting assembly material

C Carbon steel (A105) • • ★

S 316 Stainless steel • • ★

Emerson.com/Rosemount

February 2017

Rosemount DP Flow

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

(1)

No mounting (customer supplied) • • ★

G Chrome-moly grade F-11 • •

N Chrome-moly grade F-22 • •

J Chrome-moly grade F-91 • •

Piping orientation

H Horizontal piping • • ★

D Vertical piping with downwards flow • • ★

U Vertical piping with upwards flow • • ★

Rosemount Annubar type

P Pak-Lok • • ★

F Flanged with opposite side support • • ★

L Flange-Lok • •

G Gear-drive Flo-Tap • •

M Manual Flo-Tap • •

Sensor material

S 316 stainless steel • • ★

H Alloy C-276 • •

Sensor size

1 Sensor size 1 — Line sizes 2- to 8-in. (50 to 200 mm) • • ★

2 Sensor size 2 — Line sizes 6- to 96-in. (150 to 2400 mm) • • ★

3 Sensor size 3 — Line sizes greater than 12-in. (300 mm) • • ★

Mounting type

T1 Compression/threaded connection • • ★

A1 Class 150 RF ANSI • • ★

A3 Class 300 RF ANSI • • ★

A6 Class 600 RF ANSI • • ★

D1 DN PN16 flange • • ★

D3 DN PN40 flange • • ★

D6 DN PN100 flange • • ★

(2)

R1 Class 150 RTJ ANSI flange • •

R3 Class 300 RTJ ANSI flange • •

R6 Class 600 RTJ ANSI flange • •

(2)

Class 900 RF ANSI • •

Class 1500 RF ANSI • •

Class 2500 RF ANSI • •

Class 900 RTJ ANSI flange • •

Class 1500 RTJ ANSI flange • •

Class 2500 RTJ ANSI flange • •

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Opposite side support or packing gland

No opposite side support or packing gland (required for Pak-Lok and Flange-Lok models)

• • ★

Opposite side support (required for Flanged models)

C NPT threaded opposite support assembly – extended tip • • ★

D Welded opposite support assembly – extended tip • • ★

Packing gland (required for Flo-Tap models)

Packing gland material Rod material

(3)

Stainless steel packing gland/cage nipple Carbon steel PTFE • •

Stainless steel packing gland/cage nipple Stainless steel PTFE • •

Stainless steel packing gland/cage nipple Carbon steel Graphite • •

Stainless steel packing gland/cage nipple Stainless steel Graphite • •

Packing material

R Alloy C-276 packing gland/cage nipple Stainless steel Graphite • •

Isolation valve for Flo-Tap Models

(1)

1 Gate valve, carbon steel • •

2 Gate valve, stainless steel • •

5 Ball valve, carbon steel • •

6 Ball valve, stainless steel • •

Not applicable or customer supplied • • ★

Temperature measurement

T Integral RTD – not available with Flanged model greater than Class 600 • • ★

0 No temperature sensor • • ★

R Remote thermowell and RTD • •

Transmitter connection platform

7 Remote-mount NPT connections (1/2 NPT) • • ★

8 Remote-mount SW connections (1/2-in.) • •

Direct-mount, Integral 3-valve manifold– not available with Flanged model greater than Class 600

Direct-mount, 5-valve manifold – not available with Flanged model greater than Class 600

Direct-mount, high temperature 5-valve manifold – not available with Flanged model greater than Class 600

• • ★

• •

Differential pressure range

1 0 to 25 inH2O (0 to 62,16 mbar) • • ★

2 0 to 250 inH2O (0 to 621,60 mbar) • • ★

3 0 to 1000 inH2O (0 to 2,48 bar) • • ★

Emerson.com/Rosemount

February 2017

Rosemount DP Flow

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Static pressure range

(4)

None • • ★

D Absolute 0 to 800 psia (0 to 55,15 bar) — • ★

(5)

Absolute 0 to 3626 psia (0 to 250,00 bar) — • ★

J Gage –14.2 to 800 psig (–0.98 to 55,15 bar) — • ★

(5)

Gage –14.2 to 3626 psig (–0.98 to 250,00 bar) — • ★

Transmitter output

A 4–20 mA with digital signal based on HART protocol • • ★

(6)

(7)(8)

FOUNDATION Fieldbus protocol (requires PlantWeb™ housing) • • ★

Wireless (requires wireless options and Wireless PlantWeb housing) • • ★

Transmitter housing style Material

Conduit entry size

00 None (customer-supplied electrical connection) N/A N/A • — ★

1A PlantWeb housing Aluminum

/2–14 NPT • • ★

1B PlantWeb housing Aluminum M20 ⫻ 1.5 • • ★

1J PlantWeb housing SST

/2–14 NPT • • ★

1K PlantWeb housing SST M20 ⫻ 1.5 • • ★

2A Junction box housing Aluminum

/2–14 NPT • — ★

2B Junction box housing Aluminum M20 ⫻ 1.5 • — ★

Junction box housing with output for remote display and interface

Aluminum

Aluminum M20 ⫻ 1.5 • — ★

2J Junction box housing SST

(9)

(7)(10)

Junction box housing with output for remote display and interface

SST

Wireless PlantWeb housing Aluminum

Wireless PlantWeb housing SST

Quick connect (A size mini, 4-pin male termination) N/A N/A • — ★

/2–14 NPT • — ★

/2–14 NPT • • ★

1C PlantWeb housing Aluminum G1/2 • •

1L PlantWeb housing SST G1/2 • •

2C Junction box housing Aluminum G1/2 • —

Performance class

Junction box housing with output for remote display and interface

(11)

Aluminum G1/2 • —

Rosemount 3051S MultiVariable™ SuperModule™, Measurement Types 1, 2, 5, and 6

(12)

Ultra for flow: 0.8% flow rate accuracy, 14:1 flow turndown, 15-year stability, 15-year limited warranty

• • ★

5 Classic MV: 1.15% flow rate accuracy, 8:1 flow turndown, 15-yr. stability — • ★

Emerson.com/Rosemount

Rosemount DP Flow

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Rosemount 3051S Single Variable SuperModule, Measurement Types 3, 4, 7, and D

2 Classic: up to 1.4% flow rate accuracy, 8:1 flow turndown, 15-year stability • • ★

(12)

Wireless options

Ultra: up to 0.95% flow rate accuracy, 8:1 flow turndown, 15-year stability, 15-year limited warranty

Ultra for flow: 0.8% flow rate accuracy, 14:1 flow turndown, 15-year stability, 15-year limited warranty

(8)

(requires option code X and wireless PlantWeb housing)

• • ★

February 2017

Update rate, operating frequency and protocol

WA3 User configurable update rate, 2.4 GHz DSSS, IEC 62591 (WirelessHART) • • ★

Omni-directional wireless antenna and SmartPower

WK1 External antenna, adapter for Black Power module (I.S. Power Module sold separately) • • ★

WM1

WN1

Extended range, external antenna, adapter for Black Power Module (I.S. Power Module sold separately)

High-gain, remote antenna, adapter for Black Power Module (I.S. Power Module sold separately)

™

D 1-7

• • ★

• •

Other options (include with selected model number)

HART Revision configuration (requires HART Protocol output code A)

HR7 Configured for HART Revision 7 • — ★

(13)

D 1-7

Extended product warranty

WR3 3-year limited warranty • • ★

WR5 5-year limited warranty • • ★

Pressure testing

P1 Hydrostatic testing with certificate • •

PX Extended hydrostatic testing • •

(14)

Special cleaning

P2 Cleaning for special services • •

PA Cleaning per ASTM G93 level D (section 11.4) • •

Material testing

V1 Dye penetrant exam • •

Material examination

V2 Radiographic examination • •

Flow calibration

W1 Flow calibration (Average K) • •

WZ Special calibration • •

Special inspection

QC1 Visual and dimensional inspection with certificate • • ★

QC7 Inspection and performance certificate • • ★

Emerson.com/Rosemount

February 2017

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Rosemount DP Flow

Surface finish

RL Surface finish for low pipe Reynolds number in gas and steam • • ★

RH Surface finish for high pipe Reynolds number in liquid • • ★

Material traceability certification

Q8 Material traceability certificate per EN 10204:2004 3.1 • • ★

Code conformance

J2 ANSI/ASME B31.1 • •

J3 ANSI/ASME B31.3 • •

(17)

J6 European Pressure Directive (PED) • • ★

J1 Canadian Registration • •

NACE MR-0175/ISO 15156 • •

(16)

(15)

Installed in flanged pipe spool section

H3 Class 150 flanged connection with Rosemount standard length and schedule • •

H4 Class 300 flanged connection with Rosemount standard length and schedule • •

H5 Class 600 flanged connection with Rosemount standard length and schedule • •

Instrument connections for remote mount option

G2 Needle valves, stainless steel • • ★

G6 OS and Y gate valve, stainless steel • • ★

G1 Needle valves, carbon steel • •

G3 Needle valves, alloy C-276 • •

G5 OS and Y gate valve, carbon steel • •

G7 OS and Y gate valve, alloy C-276 • •

Special shipment

Y1 Mounting hardware shipped separately • • ★

Special dimensions

VM Variable mounting • •

VT Variable tip • •

VS Variable length spool section • •

Transmitter calibration certification

Q4 Calibration certificate for transmitter • • ★

QP Calibration certificate and tamper evident seal • • ★

Quality certification for safety

(20)(25)

QS Prior-use certificate of FMEDA data • — ★

(19)

Safety certified to IEC 61508 with certificate of FMEDA data • — ★

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Product certifications

E1 ATEX F lam eproof • • ★

I1 ATEX Intrinsic Safety • • ★

IA ATEX FISCO Intrinsic Safety; for FOUNDATION Fieldbus protocol only • • ★

N1 ATEX Type n • • ★

ND ATE X Dus t • • ★

K1 ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E1, I1, N1, and ND) • • ★

E4 TIIS Flameproof • • ★

E5 FM Explosion-proof, Dust Ignition-proof • • ★

I5 FM Intrinsically Safe; Nonincendive • • ★

IE FM FISCO Intrinsically Safe for FOUNDATION Fieldbus Protocol only. • • ★

(18)

I6 CSA Intrinsically Safe • • ★

IF CSA FISCO Intrinsic Safety • • ★

(18)

E7 IECEx Flameproof, Dust Ignition-proof • • ★

I7 IECEx Intrinsic Safety • • ★

IG IECEx FISCO Intrinsic Safety • • ★

N7 IECEx Type n • • ★

E3 China Flameproof • • ★

I3 China Intrinsic Safety • • ★

EM Technical Regulations Customs Union (EAC) Flameproof • • ★

IM Technical Regulations Customs Union (EAC) Intrinsic Safety • • ★

KM Technical Regulations Customs Union (EAC) Flameproof, Intrinsic Safety • • ★

EP Republic of Korea Flameproof • • ★

IP Republic of Korea Intrinsic Safety • • ★

KP Republic of Korea Flameproof, Intrinsic Safety • • ★

KA ATEX and CSA Flameproof, Intrinsically Safe, Division 2 (combination of E1, I1, E6, and I6) • • ★

(18)

KG ATEX, FM, CSA, and IECEx FISCO Intrinsic Safety (combination of IA, IE, IF, and I7) • • ★

E2 INMETRO Flameproof • • ★

FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)

• • ★

CSA Explosion-proof, Dust Ignition-proof, Division 2 • • ★

CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)

IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n (combination of E7, I7, and N7)

FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Div 2 (combination of E5, E6, I5, and I6)

FM and ATEX Explosion-proof, Intrinsically Safe, Division 2 (combination of E5, E1, I5, and I1)

FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of E5, I5, E6, I6, E1, and I1)

• • ★

Emerson.com/Rosemount

February 2017

Rosemount DP Flow

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Shipboard approvals

SBS American Bureau of Shipping • • ★

SBV Bureau Veritas (BV) Type Approval • • ★

SDN Det Norske Veritas (DNV) Type Approval • • ★

SLL Lloyds Register (LR) Type Approval • • ★

Sensor fill fluid and O-ring options

L1 Inert sensor fill fluid • • ★

L2 Graphite-filled (PTFE) O-ring • • ★

LA Inert sensor fill fluid and graphite-filled (PTFE) O-ring • • ★

Digital display

M5 PlantWeb LCD display (requires PlantWeb housing) • • ★

(20)(21)(22)

(20)(21)

Transient protection

(19)

Remote mount LCD display and interface, PlantWeb housing, no cable; SST bracket • — ★

Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable; SST bracket

Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable; SST bracket

(23)

• — ★

T1 Transient terminal block • • ★

Manifold for remote mount option

F2 3-valve manifold, stainless steel • • ★

F6 5-valve manifold, stainless steel • • ★

F1 3-valve manifold, carbon steel • •

F3 3-valve manifold, alloy C-276 • •

F5 5-valve manifold, carbon steel • •

F7 5-valve manifold, alloy C-276 • •

PlantWeb control functionality

A01 FOUNDATION Fieldbus Advanced Control Function Block Suite • — ★

PlantWeb diagnostic functionality

D01 FOUNDATION Fieldbus Diagnostics Suite • — ★

(24)(25)

DA2

PlantWeb enhanced measurement functionality

H01 FOUNDATION Fieldbus fully compensated mass flow block • — ★

Cold temperature

BRR –60 °F (–51 °C) Cold temperature start-up • • ★

Alarm limit

Advanced HART Diagnostic Suite • — ★

(26)

(27)

(20)(25)

C4 NAMUR alarm and saturation levels, high alarm • • ★

C5 NAMUR alarm and saturation levels, high alarm • • ★

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

Table 1. Rosemount 3051SFA Annubar Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

C6 Custom alarm and saturation levels, high alarm • • ★

C7 Custom alarm and saturation levels, high alarm • • ★

C8 Low alarm (standard Rosemount alarm and saturation levels) • • ★

Hardware adjustments and ground screw

(20)(25)(28)

(29)

(20)(25)(28)

Hardware adjustments (zero, span, alarm, security) • — ★

External ground screw assembly • • ★

Hardware adjustments (zero, span, alarm, security) and external ground screw assembly • — ★

Conduit plug

DO 316 SST Conduit plug • • ★

Conduit electrical connector

(30)

GE M12, 4-pin, male connector (eurofast®) • • ★

GM A size mini, 4-pin, male connector (minifast®) • • ★

Typical model number: 3051SFA D L 060 D C H P S 2 T1 0 0 0 3 2A A 1A 3

1. Provide the “A” dimension for Flanged, Flange-Lok, and Threaded Flo-Tap models. Provide the “B” dimension for Flange Flo-Tap models.

2. Available in remote mount applications only.

3. The cage nipple is constructed of 304SST.

4. Required for measurement type codes 3, 4, 7, and D.

5. For measurement type codes 1, 2, 5, and 6 with DP range 1, absolute limits are 0.5 to 2000 psi (0,03 to 137,9 bar) and gage limits are (

–0,98 to 137,9 bar).

6. Transmitter output code F is only available with measurement type code 1, 2, 5, 6, and D.

7. Only intrinsically safe approval codes apply.

8. Only available wi th measurement ty pes D and 6.

9. Only available with output code X.

10. Only available with output code A.

11. For detailed specifications see “Specifications” on page 35.

12. Only available with differential pressure ranges 2 and 3, and silicone fill fluid.

13. Opt ion HR7 conf igures the H ART output to HART Revis ion 7. This option requ ires the sel ection of the advance d diagnosti c (DA2) option. The device with this option can be field configured to HART Revision 5 or 7 if desired.

14. Applies to assembled flowmeter only, mounting not tested.

15. Instrument connections for remote mount options and isolation valves for Flo-Tap models are not included in the Material Traceability Certification.

16. Not available with transmitter connection platform 6.

17. Materials of construction comply with metallurgical requirements within NACE apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.

18. Not available with M20 or G

19. Not available with housing code 7J.

20. Not available with output code X. Only available with measurement type D.

21. Not available with output code F, option code DA2, or option code QT.

22. See the Rosemount 3051S Reference Manual

23. Not available with housing code 5A, 5J, or 7J. External ground screw assembly (option code D4) is included with the T1 option. The T1 option is not needed with FISCO Product Certifications.

24. Includes hardware adjustments (option code D1) as standard. Not available with output code X. Only available with measurement type D.

25. Not available with output code F.

26. Requires Rosemount Engineering Assistant to configure (to ensure correct operation download the Engineering Assist ant software at:

Emerson.com/Rosemount/Engineering Assistant Software

27. –58 °F (50 °C) for measurement type 1-7.

/2 conduit e ntry size.

for cable requirements. Contac t an Emerson representative for additional information.

MR0175/ISO 15156 for sour oil field production environments. Environmental limits

–14.2 to 2000 psig

Emerson.com/Rosemount

February 2017

28. Not available with housing codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J.

29. This assembly is included with options E1, N1, K1, ND, E4, E7, N7, K7, E2, E3, KA, KC, KD, IA, IE, N3, T1, EM, and KM.

30. Not available with housing code 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe; Nonincendive (option code I5) or FM FISCO Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009.

Rosemount DP Flow

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

Rosemount 3051SFC Compact Orifice Flowmeter ordering information

 Compact conditioning flowmeters reduce straight piping requirements to 2D upstream and 2D downstream from

most flow disturbances.

 Simple installation of compact flowmeters between any existing raised-face flanges

Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See page 42 for more information on material selection.

Table 2. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Measurement

Model Product description

3051SFC Compact Orifice Flowmeter • •

Measurement type

typ e • = Available

— =Unavailable

D 1-7

Fully compensated mass and energy flow calculations – Differential and Static Pressures with Temperature

— • ★

2 Compensated flow calculations – Differential and Static Pressures — • ★

3 Compensated flow calculations – Differential Pressure and Temperature — • ★

4 Compensated flow calculations – Differential Pressure — • ★

D Differential Pressure • — ★

Process variables only (no flow calculations) – Differential and Static Pressures with Tem p er at u re

— •

6 Process variables only (no flow calculations) – Differential and Static Pressures — •

7 Process variables only (no flow calculations) – Differential Pressure and Temperature — •

Primary element technology

A Rosemount Annubar averaging pitot tube • • ★

C Conditioning orifice plate • • ★

P Orifice plate • • ★

Material type

S 316 SST • • ★

Line size

(1)

005

(1)

010

(1)

015

020 2-in. (50 mm) • • ★

030 3-in. (80 mm) • • ★

/2-in. (15 mm) • • ★

1-in. (25 mm) • • ★

11/2-in. (40 mm) • • ★

040 4-in. (100 mm) • • ★

060 6-in. (150 mm) • • ★

Emerson.com/Rosemount

February 2017

Rosemount DP Flow

Table 2. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

080 8-in. (200 mm) • • ★

(2)(3)

100

120

(2)(3)

10-in. (250 mm) • • ★

12-in. (300 mm) • • ★

Primary element type

N000 Rosemount Annubar sensor size 1 • • ★

N040 0.40 beta ratio () • • ★

N050 0.50 beta ratio () • • ★

(4)

N065

0.65 beta ratio () • • ★

Temperature measurement

(5)

0 No temperature sensor • • ★

(5)

Integral RTD — • ★

Remote thermowell and RTD • •

Transmitter connection platform

3 Direct-mount, integral 3-valve manifold • • ★

7 Remote-mount, NPT connections • • ★

Differential pressure range

1 0 to 25 inH2O (0 to 62,16 mbar) • • ★

2 0 to 250 inH2O (0 to 621,60 mbar) • • ★

3 0 to 1000 inH2O (0 to 2,48 bar) • • ★

Static pressure range

(6)

None • • ★

D Absolute 0 to 800 psia (0 to 55,15 bar) — • ★

(7)

Absolute 0 to 3626 psia (0 to 250,00 bar) — • ★

J Gage –14.2 to 800 psig (–0,98 to 55,15 bar) — • ★

(7)

Gage –14.2 to 3626 psig (–0,98 to 250,00 bar) — • ★

Transmitter output

A 4–20 mA with digital signal based on HART protocol • • ★

(8)(9)

(10)(11)

FOUNDATION Fieldbus protocol • • ★

Wireless • • ★

Transmitter housing style Material

Conduit entry size

00 None (customer-supplied electrical connection) N/A N/A • — ★

1A PlantWeb housing Aluminum1/2–14 NPT • • ★

1B PlantWeb housing Aluminum M20 ⫻ 1.5 • • ★

1J PlantWeb housing SST

/2–14 NPT • • ★

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

Table 2. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

1K PlantWeb housing SST M20 ⫻ 1.5 • • ★

2A Junction box housing Aluminum1/2–14 NPT • — ★

2B Junction box housing Aluminum M20 ⫻ 1.5 • — ★

2J Junction box housing SST

(12)

(10)(13)

Junction box housing with output for remote display and interface

Aluminum1/2–14 NPT • — ★

Aluminum M20 ⫻ 1.5 • — ★

/2–14 NPT • — ★

SST

/2–14 NPT • — ★

Wireless PlantWeb housing Aluminum1/2–14 NPT • • ★

Wireless PlantWeb housing SST

/2–14 NPT • • ★

Quick connect (A size mini, 4-pin male termination) N/A N/A • — ★

1C PlantWeb housing Aluminum G1/2 • •

1L PlantWeb housing SST G1/2 • •

2C Junction box housing Aluminum G1/2 • —

Performance class

Junction box housing with output for remote display and interface

(14)

Aluminum G1/2 • —

Rosemount 3051S MultiVariable SuperModule, Measurement Types 1, 2, 5, and 6

(15)

Ultra for flow: 0.75% flow rate accuracy, 14:1 flow turndown, 15-yr stability, 15-yr limited warranty

• • ★

5 Classic MV: 1.10% flow rate accuracy, 8:1 flow turndown, 15-yr stability — • ★

Rosemount 3051S Single Variable SuperModule, Measurement Types 3, 4, 7, and D

Ultra: 0.90% flow rate accuracy, 8:1 flow turndown, 15-yr stability, 15-yr limited warranty

• • ★

2 Classic: 1.40% flow rate accuracy, 8:1 flow turndown, 15-yr stability • • ★

(15)

Wireless options

Update rate, operating frequency and protocol

Ultra for Flow: 0.75% flow rate accuracy, 14:1 flow turndown, 15-yr stability, 15-yr limited warranty

(11)

(requires option code X and wireless PlantWeb housing)

• • ★

D 1-7

WA3 User configurable update rate, 2.4 GHz DSSS, IEC 62591 (WirelessHART) • • ★

Omni-directional wireless antenna and SmartPower

™

WK1 External antenna, adapter for Black Power Module (I.S. Power Module sold separately) • • ★

WM1

WN1

Extended range, external antenna, adapter for Black Power Module (I.S. Power Module sold separately)

High-gain, remote antenna, adapter for Black Power Module (I.S. Power Module sold separately)

• • ★

• •

Emerson.com/Rosemount

February 2017

Table 2. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Rosemount DP Flow

Other options (include with selected model number)

HART Revision configuration (requires HART Protocol output code A)

HR7 Configured for HART Revision 7 • — ★

(16)

D 1-7

Extended product warranty

WR3 3-year limited warranty • • ★

WR5 5-year limited warranty

• • ★

Installation accessories

G DIN alignment ring (PN 16) • • ★

H DIN alignment ring (PN 40) • • ★

J DIN alignment ring (PN 100) • • ★

B JIS alignment ring (10K) • •

R JIS alignment ring (20K) • •

S JIS alignment ring (40K) • •

ANSI alignment ring (Class 150) (only required for 10- and 12-in. [250 and 300 mm] line sizes)

ANSI alignment ring (Class 300) (only required for 10- and 12-in. [250 and 300 mm] line sizes)

ANSI alignment ring (Class 600) (only required for 10- and 12-in. [250 and 300 mm] line sizes)

• • ★

Remote adapters

E Flange adapters 316 SST (1/2 NPT) • • ★

High temperature applications

T Graphite valve packing (T

= 850 °F) • •

max

Flow calibration

(17)

(18)(19)

Flow calibration, 3 Pt, conditioning option C (all pipe schedules) • •

Flow calibration, 10 pt, conditioning option C (all schedules), Rosemount Annubar option A (schedule 40)

• •

Pressure testing

P1 Hydrostatic testing with certificate • •

Special cleaning

P2 Cleaning for special processes • •

PA Cleaning per ASTM G93 Level D (section 11.4) • •

(20)

Special inspection

QC1 Visual and dimensional Inspection with certificate • • ★

QC7 Inspection and performance certificate • • ★

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

Table 2. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Transmitter calibration certification

Q4 Calibration data certificate for transmitter • • ★

QP Calibration certificate and tamper evident seal • • ★

Quality certification for safety

(21)(22)

QS Prior-use certificate of FMEDA data • — ★

(25)

Safety certified to IEC 61508 with certificate of FMEDA data • — ★

Material traceability certifications

Q8 Material traceability certification per EN 10204:2004 3.1 • • ★

Code conformance

J2 ANSI/ASME B31.1 • •

J3 ANSI/ASME B31.3 • •

J4 ANSI/ASME B31.8 • •

J5 NACE MR-0175/ISO 15156

(23)

• •

Country certification

J1 Canadian registration • •

Product certifications

E1 ATEX Flam epr oof • • ★

I1 ATEX Intrinsic Safety • • ★

IA ATEX FISCO Intrinsic Safety; for FOUNDATION Fieldbus protocol only • • ★

N1 ATEX Type n • • ★

ND ATEX Dus t • • ★

K1 ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E1, I1, N1, and ND) • • ★

E4 TIIS Flameproof • • ★

E5 FM Explosion-proof, Dust Ignition-proof • • ★

I5 FM Intrinsically Safe; Nonincendive • • ★

IE FM FISCO Intrinsic Safety • • ★

(24)

I6 CSA Intrinsically Safe • • ★

FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)

• • ★

CSA Explosion-proof, Dust Ignition-proof, Division 2 • • ★

IF CSA FISCO Intrinsic Safety • • ★

(24)

CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)

• • ★

E7 IECEx Flameproof, Dust Ignition-proof • • ★

I7 IECEx Intrinsic Safety • • ★

Emerson.com/Rosemount

February 2017

Rosemount DP Flow

Table 2. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

IG IECEx FISCO Intrinsic Safety: for FOUNDATION Fieldbus Protocol only • • ★

IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n (combination of E7, I7, and N7)

• • ★

E3 China Flameproof • • ★

I3 China Intrinsic Safety • • ★

EP Republic of Korea Flameproof • • ★

IP Republic of Korea Intrinsic Safety • • ★

KP Republic of Korea Flameproof, Intrinsic Safety • • ★

EM Technical Regulations Customs Union (EAC) Flameproof • • ★

IM Technical Regulations Customs Union (EAC) Intrinsic Safety • • ★

KM Technical Regulations Customs Union (EAC) Flameproof, Intrinsic Safety • • ★

(24)

ATEX and CSA Flameproof, Intrinsically Safe, Division 2 (combination of E1, I1, E6, and I6)

• • ★

(24)

FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5, E6, I5, and I6)

FM and ATEX Explosion-proof, Intrinsically Safe, Division 2 (combination of E5, E1, I5, and I1)

FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of E5, E6, E1, I5, I6, and I1)

• • ★

E2 INMETRO Flameproof • • ★

I2 INMETRO Intrinsic Safety • • ★

K2 INMETRO Flameproof, Intrinsic Safety • • ★

IB INMETRO FISCO Intrinsic Safety • — ★

Shipboard approvals

SBS American Bureau of Shipping • • ★

SBV Bureau Veritas (BV) Type Approval • • ★

SDN Det Norske Veritas (DNV) Type Approval • • ★

SLL Lloyds Register (LR) Type Approval • • ★

Sensor fill fluid and O-ring options

L1 Inert sensor fill fluid • • ★

L2 Graphite-filled (PTFE) O-ring • • ★

LA Inert sensor fill fluid and graphite-filled (PTFE) O-ring • • ★

Digital display

(25)

M5 PlantWeb LCD display • • ★

(22)(26)(27)

(22)(26)

Remote mount LCD display and interface, PlantWeb housing, no cable, SST bracket • — ★

Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable, SST bracket

Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable, SST bracket

• — ★

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

Table 2. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Transient protection

(28)

T1 Transient terminal block • • ★

Manifold for remote mount option

F2 3-valve manifold, SST • • ★

F6 5-valve manifold, SST • • ★

PlantWeb control functionality

A01 FOUNDATION Fieldbus Advanced Control Function Block Suite • — ★

PlantWeb diagnostic functionality

D01 FOUNDATION Fieldbus Diagnostics Suite • — ★

(29)

DA2

H01 FOUNDATION Fieldbus fully compensated mass flow block • — ★

Cold temperature

Advanced HART Diagnostic Suite • — ★

(30)

BRR –60 °F (–51 °C) Cold temperature start-up • • ★

Alarm limit

(21)(22)

C4 NAMUR alarm and saturation levels, high alarm • • ★

C5 NAMUR alarm and saturation levels, low alarm • • ★

C6 Custom alarm and saturation levels, high alarm • • ★

C7 Custom alarm and saturation levels, low alarm • • ★

C8 Low alarm (standard Rosemount alarm and saturation levels) • • ★

Hardware adjustments and ground screw

(21)(22)(31)

(32)

(21)(22)(31)

Hardware adjustments (zero, span, alarm, security). • — ★

External ground screw assembly • • ★

Hardware adjustments (zero, span, alarm, security) and external ground screw assembly

• — ★

Conduit plug

DO 316 SST Conduit plug • • ★

Conduit electrical connector

ZE M12, 4-pin, male connector (eurofast) • • ★

ZM A size mini, 4-pin, male connector (minifast) • • ★

(33)

Typical model number: 3051SFC 1 C S 060 N 065 T 3 2 J A 1A 3

1. Available wi th primary element tech nology P only.

2. For the 10- and 12-in. (250 and 300 mm) line sizes, the alignment ring must be ordered (installation accessories).

3. 10- and 12-in. (250 and 300 mm) line sizes not available with primary element technology code A.

4. For 2-in. (50 mm) line size the beta ratio is 0.6 for primary element technology code C.

Emerson.com/Rosemount

February 2017

5. Only available with measurement type codes 1, 3, 5, 7.

6. Required for measurement type codes 3, 4, 7, and D.

7. For Measurement Type codes 1, 2, 5, and 6 with DP range 1, absolute limits are 0.5 to 2000 psi (0,03 to 137,9 bar) and gage limits are

Rosemount DP Flow

–14.2 to 2000 psig (–0,98 to 137,9 bar).

8. Requires PlantWeb housing.

9. Transmitter output code F is only available with measurement type code 1, 2, 5, 6, and D.

10. Only intrinsically safe approval codes apply.

11. Only available with measurement types D and 6.

12. Only available with output code X.

13. Available with output code A only.

14. For detailed specifications see “Specifications” on page 35.

15. Only available with differential pressure ranges 2 and 3, and silicone fill fluid.

16 . O ptio n HR 7 co nfig ure s the HAR T out put to H ART R evis ion 7. Th is o ptio n re qui res t he s elec tio n of the adva nce d dia gno stic s (DA 2) option. The device with this option

can be field configured to HART Revision 5 or 7 if desired.

17. Available with primary element technology code C only.

18. Available with primary element technology codes C or A only.

19. For Rosemount Annubar option A, consult factory for pipe schedules other than Sch. 40.

20. Available with primary element technology C o r P only.

21. Not available with output protocol code F.

22. Not available with output code X. Only available with measurement type D.

23. Materials of construction comply with metallurgical requirements within NACE MR0175/ISO for sour oil field production environments. Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.

24. Not available with M20 or G

25. Not available with housing code 7J.

26. Not available with output code F, option code DA2, or option code QT.

27. See the Rosemount 3051S Reference Manual

28. Not available with housing code 00, 5A, 5J, or 7J. External ground screw assembly (option code D4) is included with the T1 option. The T1 option is not needed with FISCO Product Certifications.

29. Includes hardware adjustments (option code D1) as standard. Not available with output code X. Only available with measurement type D.

30. –58 °F (50 °C) for measurement type 1-7.

31. Not available with housing codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J.

32. This assembly is included with options EP, KP, E1, N1, K1, ND, E4, E7, K7, E3, KA, KC, KD, IA, T1, EM, and KM.

33. Not available with Housing code 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe; Nonincendive (option code I5) or FM FISCO Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009.

/2 conduit e ntry size.

for cable requirements. Contac t an Emerson representative for additional information.

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

Rosemount 3051SFP Integral Orifice Flowmeter ordering information

 Precision honed pipe section for increased accuracy in small line sizes

 Self-centering plate design prevents alignment errors that magnify measurement inaccuracies in small line sizes

Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See page 42 for more information on material selection.

Table 3. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Measurement

Model Product description

typ e

D 1-7

3051SFP Integral Orifice Flowmeter • •

Measurement type

• = Available — = Unavailable

2 Compensated flow calculations – Differential and Static Pressures — • ★

3 Compensated flow calculations – Differential Pressure and Temperature — • ★

4 Compensated flow calculations – Differential Pressure — • ★

D Differential Pressure • — ★

6 Process variables only (no flow calculations) – Differential and Static Pressures — •

7 Process variables only (no flow calculations) – Differential Pressure and Temperature — •

Fully compensated mass and energy flow calculations – Differential and Static Pressures with Temperature

Process variables only (no flow calculations) – Differential and Static Pressures with Tem pe ra tu re

— • ★

— •

Body material and type

F 316 SST, enhanced support body • • ★

S 316 SST, traditional body • • ★

Line size

005

010 1-in. (25 mm) • • ★

015 11/2-in. (40 mm) • • ★

/2-in. (15 mm) • • ★

Process connection

T1 NPT Female body (not available with thermowell and RTD) • • ★

(1)

P1 Pipe ends: NPT threaded • • ★

P2 Pipe ends: beveled • • ★

D1 Pipe ends: flanged, DIN PN16, slip-on • • ★

D2 Pipe ends: flanged, DIN PN40, slip-on • • ★

D3 Pipe ends: flanged, DIN PN100, slip-on • • ★

W1 Pipe ends: flanged, RF, ANSI Class 150, weld-neck • • ★

Socket Weld body (not available with thermowell and RTD) • • ★

Emerson.com/Rosemount

February 2017

Table 3. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

W3 Pipe ends: flanged, RF, ANSI Class 300, weld-neck • • ★

W6 Pipe ends: flanged, RF, ANSI Class 600, weld-neck • • ★

W9 Pipe ends: flanged, RF, ANSI Class 900, weld-neck • • ★

A1 Pipe ends: flanged, RF, ANSI Class 150, slip-on • •

A3 Pipe ends: flanged, RF, ANSI Class 300, slip-on • •

A6 Pipe ends: flanged, RF, ANSI Class 600, slip-on • •

R1 Pipe ends: flanged, RTJ, ANSI Class 150, slip-on • •

R3 Pipe ends: flanged, RTJ, ANSI Class 300, slip-on • •

R6 Pipe ends: flanged, RTJ, ANSI Class 600, slip-on • •

R9 Pipe ends: flanged, RTJ, ANSI Class 900, weld-neck • •

P9 Special process connection • •

Rosemount DP Flow

Orifice plate material

S 316/316L SST • • ★

H Alloy C-276 • •

M Alloy 400 • •

Bore size option

0066 0.066-in. (1.68 mm) for 1/2-in. pipe • • ★

0109 0.109-in. (2.77 mm) for 1/2-in. pipe • • ★

0160 0.160-in. (4.06 mm) for 1/2-in. pipe • • ★

0196 0.196-in. (4.98 mm) for 1/2-in. pipe • • ★

0260 0.260-in. (6.60 mm) for 1/2-in. pipe • • ★

0340 0.340-in. (8.64 mm) for 1/2-in. pipe • • ★

0150 0.150-in. (3.81 mm) for 1-in. pipe • • ★

0250 0.250-in. (6.35 mm) for 1-in. pipe • • ★

0345 0.345-in. (8.76 mm) for 1-in. pipe • • ★

0500 0.500-in. (12.70 mm) for 1-in. pipe • • ★

0630 0.630-in. (16.00 mm) for 1-in. pipe • • ★

0800 0.800-in. (20.32 mm) for 1-in. pipe • • ★

0295 0.295-in. (7.49 mm) for 11/2-in. pipe • • ★

0376 0.376-in. (9.55 mm) for 11/2-in. pipe • • ★

0512 0.512-in. (13.00 mm) for 11/2-in. pipe • • ★

0748 0.748-in. (19.00 mm) for 11/2-in. pipe • • ★

1022 1.022-in. (25.96 mm) for 11/2-in. pipe • • ★

1184 1.184-in. (30.07 mm) for 11/2-in. pipe • • ★

0010 0.010-in. (0.25 mm) for 1/2-in. pipe • •

0014 0.014-in. (0.36 mm) for 1/2-in. pipe • •

Emerson.com/Rosemount

Rosemount DP Flow

February 2017

Table 3. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

0020 0.020-in. (0.51 mm) for 1/2-in. pipe • •

0034 0.034-in. (0.86 mm) for 1/2-in. pipe • •

Transmitter connection platform

D3 Direct-mount, 3-valve manifold, SST • • ★

D5 Direct-mount, 5-valve manifold, SST • • ★

R3 Remote-mount, 3-valve manifold, SST • • ★

R5 Remote-mount, 5-valve manifold, SST • • ★

D4 Direct-mount, 3-valve manifold, alloy C-276 • •

D6 Direct-mount, 5-valve manifold, alloy C-276 • •

R4 Remote-mount, 3-valve manifold, alloy C-276 • •

R6 Remote-mount, 5-valve manifold, alloy C-276 • •

Differential pressure range

1 0 to 25 inH2O (0 to 62,16 mbar) • • ★

2 0 to 250 inH2O (0 to 621,60 mbar) • • ★

3 0 to 1000 inH2O (0 to 2,48 bar) • • ★

Static pressure range

(2)

None • • ★

D Absolute 0 to 800 psia (0 to 55,15 bar) — • ★

(3)

Absolute 0 to 3626 psia (0 to 250,00 bar) — • ★

J Gage –14.2 to 800 psig (–0,98 to 55,15 bar) — • ★

(3)

Gage –14.2 to 3626 psig (–0,98 to 250,00 bar) — • ★

Transmitter output

A 4–20 mA with digital signal based on HART protocol • • ★

(4)

(5)(6)

Transmitter housing style Material

00 None (customer-supplied electrical connection) • — ★

1A PlantWeb housing Aluminum1/2–14 NPT • • ★

1B PlantWeb housing Aluminum M20 ⫻ 1.5 • • ★

1J PlantWeb housing SST

1K PlantWeb housing SST M20 ⫻ 1.5 • • ★

FOUNDATION Fieldbus (requires PlantWeb housing) • • ★

Wireless (requires wireless options and wireless PlantWeb housing) • • ★

Conduit entry size

/2–14 NPT • • ★

2A Junction box housing Aluminum1/2–14 NPT • — ★

2B Junction box housing Aluminum M20 ⫻ 1.5 • — ★

Junction box housing with output for remote display and interface

Aluminum1/2–14 NPT • — ★

Emerson.com/Rosemount

February 2017

Rosemount DP Flow

Table 3. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

2J Junction box housing SST

(7)

(5)(8)

Junction box housing with output for remote display and interface

Aluminum M20 ⫻ 1.5 • — ★

/2–14 NPT • — ★

SST

/2–14 NPT • — ★

Wireless PlantWeb housing Aluminum1/2–14 NPT • • ★

Wireless PlantWeb housing SST

/2–14 NPT • • ★

Quick Connect (A size mini, 4-pin male termination) • — ★

1C PlantWeb housing Aluminum G1/2 • •

1L PlantWeb housing SST G1/2 • •

2C Junction box housing Aluminum G1/2 • —

Performance class

Junction box housing with output for remote display and interface

(9)

Aluminum G1/2 • —

Rosemount 3051S MultiVariable SuperModule, measurement types 1, 2, 5, and 6

(10)

Ultra for flow: 0.95% flow rate accuracy, 14:1 flow turndown, 15-year stability, 15-year limited warranty

• • ★

5 Classic MV: 1.25% flow rate accuracy, 8:1 flow turndown, 15-year stability — • ★

Rosemount 3051S Single Variable SuperModule, measurement types 3, 4, 7, and D

Ultra: 1.05% flow rate accuracy, 8:1 flow turndown, 15-year stability, 15-year limited warranty

• • ★

2 Classic: 1.50% flow rate accuracy, 8:1 flow turndown, 15-year stability • • ★

(10)

Wireless options

Update rate, operating frequency and protocol

Ultra for Flow: 0.95% flow rate accuracy, 14:1 flow turndown, 15-year stability, 15-year limited warranty

(6)

(requires option code X and wireless PlantWeb housing)

• • ★

D 1-7

WA3 User configurable update rate, 2.4 GHz DSSS, IEC 62591 (WirelessHART) • • ★

Omni-directional wireless antenna and SmartPower

™

WK1 External antenna, adapter for Black Power Module (I.S. Power Module sold separately) • • ★

WM1

WN1

Extended range, external antenna, adapter for Black Power Module (I.S. Power Module sold separately)

High-gain, remote antenna, adapter for Black Power Module (I.S. Power Module sold separately)

• • ★

• •

Other options (include with selected model number)

HART Revision configuration (requires HART Protocol output code A)

(11)

HR7 Configured for HART Revision 7 • — ★

D 1-7

Emerson.com/Rosemount

Rosemount DP Flow

Table 3. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

February 2017

Extended product warranty

WR3 3-year limited warranty • • ★

WR5 5-year limited warranty

Transmitter/body bolt material

G High temperature option (554 °F [290 °C]) • •

Temperature sensor

T Thermowell and RTD • • ★

(13)

(12)

• • ★

Optional connection

G1 DIN 19213 Transmitter connection • • ★

Pressure testing

P1 Hydrostatic testing with certificate • •

(14)

Special cleaning

P2 Cleaning for special services • •

PA Cleaning per ASTM G93 Level D (Section 11.4) • •

Material testing

V1 Dye penetrant exam • •

Material examination

Flow calibration

WD Discharge coefficient verification • •

WZ Special calibration • •

Radiographic examination (available only with process connection code W1, W3, W6, and W9)

(15)

• •

Special inspection

QC1 Visual and dimensional Inspection with certificate • • ★

QC7 Inspection and performance certificate • • ★

Material traceability certification

Q8 Material certification per EN 10204:2004 3.1 • • ★

Code conformance

(16)

J2 ANSI/ASME B31.1 • •

J3 ANSI/ASME B31.3 • •

J4 ANSI/ASME B31.8 • •

Materials conformance

J5 NACE MR-0175/ISO 15156 • •

(17)

Emerson.com/Rosemount

February 2017

Rosemount DP Flow

Table 3. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.

Country certification

J6 European Pressure Directive (PED) • • ★

J1 Canadian registration • •

Transmitter calibration certification

Q4 Calibration data certificate for transmitter • • ★

Quality certification for safety

QS Prior-use Certificate of FMEDA data • — ★

(22)

Product certifications

E1 ATE X Flamepro of • • ★

I1 ATEX Intrinsic Safety • • ★

IA ATEX FISCO Intrinsic Safety; for FOUNDATION Fieldbus protocol only • • ★

Safety-certified to IEC 61508 with Certificate of FMEDA data • — ★

(20)

(18)(19)

N1 ATEX Type n • • ★

ND ATE X Dust • • ★

K1 ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E1, I1, N1, and ND) • • ★

E4 TIIS Flameproof • • ★

E5 FM Explosion-proof, Dust Ignition-proof • • ★

I5 FM Intrinsically Safe; Nonincendive • • ★

IE FM FISCO Intrinsic Safety • • ★

(21)

FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)

• • ★

CSA Explosion-proof, Dust Ignition-proof, Division 2 • • ★

I6 CSA Intrinsically Safe • • ★

(21)

CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)

• • ★

E7 IECEx Flameproof, Dust Ignition-proof • • ★

I7 IECEx Intrinsic Safety • • ★

IG IECEx FISCO Intrinsic Safety • • ★

IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n (combination of E7, I7, and N7)

• • ★

KG IECEx, FM, CSA, and IECEx FISCO Intrinsic Safety (combination of IA, IE, IF, and IG) • • ★

E3 China Flameproof • • ★

I3 China Intrinsic Safety • • ★

EM Technical Regulations Customs Union (EAC) Flameproof • • ★

IM Technical Regulations Customs Union (EAC) Intrinsic Safety • • ★

KM Technical Regulations Customs Union (EAC) Flameproof, Intrinsic Safety • • ★

EP Republic of Korea Flameproof • • ★

Emerson.com/Rosemount

+ 214 hidden pages

Rosemount 3051SFC, 2051CFC, 2051CFP, 1195 Specifications

Specifications and Main Features

Frequently Asked Questions

User Manual

DP Flowmeter Selection Guide

Rosemount 3051SF DP Flowmeters

Rosemount 3051SFA Annubar Flowmeter ordering information

Rosemount 3051SFC Compact Orifice Flowmeter ordering information

Rosemount 3051SFP Integral Orifice Flowmeter ordering information