Rollei 100 WA, 130 WA, Prego 100 WA, Prego 130 WA Instructions For Use Manual

Rollei Prego 100 WA
Rollei Prego 130 WA

Instructions for use

2

The camera will not take a picture if ...

›

there is no battery in the camera or the
battery is empty,

›

the lens cover is closed (camera is switched
off),

›

the film is being rewound,

›

the rewound film is still in the camera

›

the flash has not yet charged.

A microcomputer controls the camera elec­tronically. In rare cases, strong electrical or
magnetic fields can lead to malfunctions. In
such circumstances, remove the battery for
2 – 3 minutes. When it has been replaced, the
camera should function normally.

The camera

›

Do not take the camera apart yourself. It
contains high-voltage elements that can be
dangerous.
If you do, the warranty will cease to be valid.

›

If the housing becomes damaged, do not
touch any internal parts to avoid the risk of
an electric shock.

›

Should the camera get wet, remove the
battery for the same reason.

The battery

›

The camera will not work without a battery.

›

When you insert a battery, make sure it is the
right way round (check the poles).

›

Do not recharge the battery, or short-circuit
it, take it apart, throw it on the fire or expose
it to moisture. Keep it away from children
and animals and do not dispose of it in the
normal household refuse.

GENERAL

3

LIST OF CONTENTS

Getting ready

Camera body

›

4

LCD panel

›

6

Finder / Autofocus LED

›

7

Inserting the battery

›

8

Battery status

›

9

Attaching the hand strap

›

9

Loading a film

›

10

Removing the film

›

11

Rewinding partly exposed films

›

11

Switching on / Zooming

›

12

Police recommendation:

Take pictures of all valuables and catalogue
them, firstly to make life difficult for receivers of
stolen goods and secondly to save yourself
unnecessary annoyance.

Picture taking

Holding the camera

›

13

Taking a photograph

›

14

Focus lock

›

15

Menu control

›

16

Program system flash

›

17

Flash modes

›

18

Red-eye reduction

›

19

Fill-in flash

›

20

Flash off

›

20

Night flash

›

21

Self-timer

›

22

Remote control

›

23

Infinity (landscape)

›

24

Close-ups

›

25

Date imprinting

›

26

Setting the date and time

›

28

Miscellaneous

Camera care

›

29

Overcoming problems

›

30

Technical data

›

31

4

CAMERA BODY

1 Strap eyelet
2 Shutter-release button
3 IR remote shutter sensor
4 Autofocus window
5 Self-timer LED
6 Viewfinder window
7 Exposure sensor
8 Flash unit
9 Unlocking button for camera back

10 Lens, automatically retractable

2

3

4

5

6

7

8

9

10

1

5

CAMERA BODY

11 Finder eyepiece
12 Green LED

(sharpness indicator)
13 Master switch ON/OFF
14 Zoom switch
15 Battery compartment

cover
16 Unlocking button for

battery compartment
17 Film window
18 Shift button
19 Mode button
20 Tripod socket
21 LCD monitor
22 Rewind button
23 Camera back
24* Eyesight correction

11

15

16

12

13

14

17

18

19

2021

22

23

24

* Prego 130 WA only

6

LCD PANEL

LCD panel

Autoflash

Auto red-eye reduction

Flash on

Flash off

Night portrait

Special modes switched off
(self-timer, remote release)

Self-timer
(up to 3 exposures in sequence)

Remote control mode

Special modes are switched off
(infinity, macro)

Infinity setting

Macro mode

Data imprinting

Frame counter

Battery status

flash

self

mode

date

exp. no.

AF

AUTO

I

OFF

’88 88’:88

88

AF

AUTO

OFF

’88 88’:88

88

I

7

FINDER / AUTOFOCUS LED

Autofocus display

If you press the shutter release lightly, the
green LED will light up or flash.

›

If the LED lights up, the conditions are right
for taking a photo, the flash is ready.

›

If the LED flashes quickly, the subject is too
close (below 0.65 m with wide-angle and
telephoto).

›

If the LED flashes slowly,

›

the shutter speed is too slow, use a tri­pod.

›

the camera cannot focus.

Finder

The camera is equipped with a real-image
zoom finder.

1 Frame
2 AF metering area
3 Parallax marks for camera-to-subject dis-

tances below 1 m

4 Green LED (sharpness indicator)

3

2

4

1

8

INSERTING THE BATTERY

Inserting the battery

The camera takes a 3 V lithium battery e.g. CR 2/
DL CR 2. A NiCad battery should not be used.

›

Unlock the battery compartment cover (15)
and open it.

›

Insert the battery with the poles the right way
round.

›

Close the cover and secure it in place.

›

Always switch off the camera before chang­ing the battery.

Make sure the old battery is disposed of properly!

Note:

If you are not using the camera for several
weeks, take the battery out.

Important

›

The date shown in the display disappears 5
seconds after the battery has bee removed.
You will therefore have to reset the date
when you put in a new battery.

›

Should the battery run out while the film is
rewinding, insert a new battery and continue
the rewinding process by pressing on the
rewind button (22). When the rewinding pro­cedure has finished, the frame counter will
show “E”.

9

BATTERY STATUS

Battery status

Switch on the camera with the master switch
(13) and check the battery symbol on the LCD
monitor (21):

›

Full battery icon: battery is fully charged.

›

Low battery warning: battery should be re­placed. When this symbol appears, there is
enough power left for about one more film.

›

If the battery symbol flashes, there is not
enough power left to operate the camera.
Replace the battery.

Note:

The available battery capacity decreases at
lower temperatures. In cold weather, it is ad­visable to keep a spare battery ready.

Attaching the hand strap

›

Pull the thin end of the hand strap through
the eyelet (1), then push the long end through
the loop and tighten.

10

LOADING A FILM

Loading a film

›

Open the back of the camera (23) using the
unlocking button (9).

›

Place the film in the film compartment, push
it in firmly and pull out the film until the
beginning of the film reaches the take-up
spool.

›

Make sure the film is lying flat on the film
guide.

›

Close the back again and the motor will
automatically advance the film to frame 1.

›

If the film has been correctly loaded, the
display will show frame 1.

›

If not, open the back again and repeat the
loading procedure as described above.

Note:

The camera is designed for DX-coded 35 mm
film. The film speed is set automatically within
the range ISO 50/18° to 3200/36°.

Never insert the film in direct sunlight.

11

Removing the film

›

At the end of the film, the film rewinds auto­matically.

›

The rewinding process stops automatically
as soon as the film has been fully rewound in
the cartridge and the frame counter shows
“E” for “empty”. Only then should you open
the camera back to remove the film.

›

Please note that the last two frames of the
film may overlap if there are more than the
nominal number of exposures on the film.

REMOVING THE FILM

Rewinding partly exposed films

›

To rewind a partly exposed film, activate the
rewind button (22) (e.g. with the tip of a ball­point pen).

12

SWITCHING ON / ZOOMING

Before shooting

›

Press master switch (13). The lens cover
opens, the camera switches itself on, the
LCD fills with data and the lens moves into
the ready position (WA, equivalent to 28
mm).

Prego 130 WA only:

›

Point the camera at the subject and use the
zoom lever (14) to move in closer.

›

Once you have framed your shot, rotate the
eyesight correction knob (24) until the picture
appears sharp (-1.5 – +1.5 dpt).

After shooting

›

After you have taken a shot or a series of
shots, press the master switch (13) to re­tract the lens and avoid taking exposures
unintentionally.

›

After seven minutes at the latest, the camera
will switch itself off and the lens will return to
its retracted position.

13

HOLDING THE CAMERA

Holding the camera

›

Hold the camera firmly with both hands to
prevent any shake.

›

If possible, support your elbows against
your body.

›

Hold the camera close to your eye to have a
full view of the frame.

›

Press the shutter release slowly without any
jerking movements.

Caution:

›

Make sure your fingers, hair or indeed the
hand strap is not covering the lens, autofocus
window, exposure sensor window or the
flash.

›

When taking vertical format shots, hold the
camera so that the flash unit is at the top and
the direction of the light is as natural as
possible.

14

TAKING A PHOTOGRAPH

Taking a photograph

›

Target your subject in the viewfinder (11).

›

Consult the data in the display.

›

Press the shutter release lightly. The LED will
light up continuously if the subject is in the
correct range between 0.65 m and ∞.

Autofocus frame

The autofocus frame corresponds to the cam­era’s autofocus metering area. When you com­pose your picture, aim the focus frame at the
subject.

Releasing the shutter

›

Press the shutter release (2).

›

When the shutter has been released, the film
automatically advances by one frame and
the frame counter in the display moves on to
the next frame to be exposed.

15

FOCUS LOCK

Focus lock

The focus lock enables you to focus on a part
of the subject outside the centre of the frame.
Proceed as follows:

›

Aim the finder so that the autofocus meter­ing area points at the main subject you want
to be in focus.

›

Press the shutter release (2) halfway down
to store the focus setting, and hold it there
(green LED (12) lights up or flashes).

›

With the stored focus setting, compose the
picture and press the shutter release right
down.

›

The automatic focus lock is cancelled as
soon as you let go of the shutter release.

1 2 33

16

MENU CONTROL (MODE AND SHIFT BUTTON)

Selecting the mode level

›

Activate the master switch (13).

›

The display (21) lights up green.

›

When you activate the mode button (19), the
light in the display turns to red.

›

You can change from one level to another
using the shift button (18).

›

To do this, press the shift button up or down
in the direction of the arrow until the desired
level flashes.

›

The individual modes can be selected and
confirmed.

Selecting a mode

›

Activate the shift button to the left or right in
the direction of the arrows.

›

When you find the mode you want, confirm
it with the mode button.

›

The display lights up green.

›

The changes are entered in the memory.

flash

self

mode

date

exp. no.

AUTO

AF

OFF

OFF

flash

self

mode

date

exp. no.

AF

AUTO

OFF

OFF

17

PROGRAM SYSTEM FLASH

Program system flash

The Rollei Prego 100 WA/ Prego 130 WA fea­tures a new technology for compact cameras.
When you work with the flash, the camera
automatically takes into account the amount of
light, the brightness of the subject, the dis­tance away and the focal length of the lens.
Conventional flash units in compact cameras
flash at full power regardless of how far away

the subject is. The flash unit in the Prego 100

WA/

Prego 130 WA carefully monitors the amount of
light emitted.

Examples:
Close-up photography

in low ambient light

With a normal flash exposure, the flash unit
emits all its power and the picture is overex­posed. With the integrated system flash, how­ever, the power output adapts to the particular
conditions (up to 12.5 %).

Portrait shots in very bright daylight

Under such conditions, portraits can show
very hard shadows around the nose or hair.
With a conventional fill-in flash, the flash unit
emits its full power.
With the system flash in the Prego 100 WA/
Prego 130 WA, only enough light is emitted to
tone down the hard shadow and produce a
naturally lit portrait.

18

(LEVEL: “FLASH”) FLASH MODES / AUTOMATIC FLASH

Film speed/Range

Wide angle Telephoto

Prego 100 WA:

ISO 100/21° 0.65 m – 2.9 m 0.65 m – 2.0 m

Prego 130 WA:

ISO 100/21° 0.65 m – 2.9 m 0.65 m – 1.8 m

flash

self

mode

date

exp. no.

AUTO

Flash operation

When you press the mode button (19), the
display lights up and the individual symbols for
the flash modes appear in the “AUTO” menu
level.

Automatic flash

›

In this mode, the flash automatically comes
on in poor lighting conditions to ensure
correct exposure.

›

Touch the shutter release lightly as soon as
the green LED lights up and the camera is
ready to shoot.

›

Press the shutter release right down to take
the picture.

›

If the flash symbol in the display goes on and
off after the exposure, the flash unit is charg­ing. Until the flash unit is ready, the shutter
release is locked to prevent wrong expo­sures.

›

Flash exposures are synchronised at 1/45
sec with wide angle and at 1/70 sec with
telephoto. It is therefore important to hold
the camera steady when taking a picture.

›

If you are taking flash exposures of people or
animals in poor light, switch to “red-eye
reduction”.

Note:

Switching off the camera resets to automatic
mode apart from the “red-eye reduction” mode.

19

RED-EYE REDUCTION

Red-eye reduction

People photographed with flash under poor
light conditions often end up with red eyes.

›

To reduce this effect, the camera emits
several short preflashes before taking the
actual picture so that the pupils of the peo­ple in the photo become smaller.

›

To switch on the red-eye reduction mode,
briefly press the mode button and select the
relevant symbol with the shift button. Con­firm by pressing the mode button again.

Note:

Red eyes are due to a reflection of the retina in
the eye. This effect can be reduced by increas­ing the distance between the flash unit and the
subject.

flash

self

mode

date

exp. no.

20

Flash off

›

If flashlight might affect the natural mood of
your scene, switch the flash off by using the
mode and shift button to select the ‘flash off’
symbol.

›

This may well be useful not only for ‘available
light’ shots, but also where flash units are
not permitted – for example, in museums.

›

On the other hand, working without flash
may produce long shutter speeds that would
result in camera wobble with hand-held
shots.

›

A tripod should therefore be used where
possible.

flash

self

mode

date

exp. no.

FILL-IN FLASH / FLASH OFF

Fill-in flash

Bright daylight can produce deep shadow in
the foreground or create backlit situations. In
such cases, a fill-in flash can improve the
results.

›

To switch on the fill-in flash, briefly press the
mode button (19) and select the symbol for
fill-in flash with the shift button (18). Confirm
via the mode button. The longest shutter
speed in this mode is 1/4 sec, so that special
measures (tripod) may be necessary to avoid
camera wobble and blurred pictures.

flash

self

mode

date

exp. no.

21

NIGHT FLASH

Night flash

This is a combination of flash and long shutter
speed. While the flash illuminates a person in
the foreground, the longer shutter speed ac­centuates the lower lighting in the background
and enhances the mood of the picture.

flash

self

mode

date

exp. no.

›

In this mode, the shutter speed may be as
long as 1 sec. To avoid any loss of sharp­ness due to camera wobble, it is advisable
to use a tripod.

›

To switch on this mode, select the night
flash symbol with the aid of the mode and
shift button.

22

Self-timer

The self-timer can be combined with any of the
flash modes, including slow shutter synch.

›

Press the mode button and select the self­timer symbol with the shift button.

›

Frame the shot.

›

Activate the self-timer by pressing the shut­ter release. The camera takes the picture
after a delay of 10 sec.

›

During this time, the self-timer LED flashes
(5).

›

In the last 3 sec, the LED begins to flash
faster.

›

The focusing and exposure settings are
stored on pressing the shutter release.

›

To interrupt the delayed exposure, press the
mode button again or switch off the camera.

›

After the picture has been taken, the camera
returns to normal operation mode.

Note:

By pressing the shift button again, the self­timer mode can take up to 3 exposures one
after the other.

(LEVEL: “SELF”) SELF-TIMER

2 x

flash

self

mode

date

exp. no.

I

23

REMOTE CONTROL

Taking pictures with the remote control

›

Slide back the protective cover of the re­mote control unit.

›

Press the mode and shift button until the
remote control symbol appears. Point the
remote control at the camera (if necessary,
stand the camera on a tripod) and press the
release button on the remote control.

›

The exposure is made after 2 sec. During
this time, the self-timer LED (5) lights up.

3 x

flash

self

mode

date

exp. no.

○○○○

Remote control

1 Protective cover
2 Release button
3 IR transmitter

3

2

1

Note:

The protective cover is for attaching to the
hand strap.
The IR remote control has a range of approx. 5 m.

24

Infinity (landscape)

In this setting, the camera is focused at infinity.
It is ideal if your subject is a long way away or
if you want to photograph distant objects
through a window.

›

To switch this mode on, use the mode and
shift button to select the appropriate symbol
and confirm.

›

The flash mode is automatically switched
off.

1 x

flash

self

mode

date

exp. no.

(LEVEL “MODE”) INFINITY SETTING (LANDSCAPE)

›

Please note that poor light can lead to slow
shutter speeds with the possibility of blur­ring due to camera wobble. Use a tripod if
necessary.

›

After taking the shot, the camera automati­cally erases this setting.

In the “mode” level, the settings for infinity and
macro can be selected in addition to the nor­mal autofocus mode (AF).

25

flash

self

mode

date

exp. no.

Note:

With macro shots, the flash switches on auto­matically.

Close-ups (macro)

The macro mode extends from 0.5 m to 1.0 m.

›

With the mode and shift button, select the
macro symbol in the display and confirm
with the mode button. The lens moves auto­matically into the macro position.

›

Frame the picture within the parallax marks
for the macro range.

›

The macro mode is automatically deacti­vated after the shot has been taken.

›

If the distance to the subject is outside the
macro range, the green LED starts to flash
and the shutter release is locked.

CLOSE-UPS (MACRO)

26

DATE IMPRINTING

Automatic date imprint

The Prego 100 WA / Prego 130 WA is equipped
with a built-in quartz timer and a calendar
programmed up to December 31, 2032, so
that the date (and/or time) can be imprinted at
the bottom right-hand corner of the expo­sures.

Choice of imprinting format

Four different date formats are available. In
addition, the imprinting mode can be switched
off at any time.

The date must be reset after a battery change.

27

DATE IMPRINTING

Date imprinting

Briefly press the mode button (19) and select
the “date” level with the shift button (18). The
display begins to flash. By pressing the shift
button to the left or right, you can select the
desired option and save it by pressing the
mode button.

flash

self

mode

date

exp. no.

’88 88’:88

’02 3 9

3 9 ’02

9 3 ’02

OFF

914:06

• Year – Month – Day

• Month – Day – Year

• Day – Month – Year

• Day – Hour – Minute

• none

28

SETTING THE DATE AND TIME

Note:

• To run quickly through the figures, keep your
finger on the shift button, up/down.

• The correction procedure can be terminated
by pressing the mode button.

Setting the date and time

›

You can select the way you want to write the
date and time via the shift button. The dis­play flashes.

›

To make a correction, press the mode but­ton until one of the figures begins to flash.

›

You can move from one figure to another via
the shift button, up/down.

›

Correct the selected values by pressing the
shift button, left/right.

›

When you have made all the changes, press
the mode button. The new notation appears
in the display.

29

CAMERA CARE

Camera care

›

Protect your camera from knocks and blows.
Loop the hand strap over your wrist to make
sure you do not drop it.

›

Protect the camera from damp and wet
conditions, constant sunshine and sand.
This is particularly important when the cam­era is open to change a film.

›

Keep the film pressure plate clean and oc­casionally clean it off with a soft leather
cloth. Use a brush to clean the inside of the
camera.

›

A soft brush is also the best tool for cleaning
the lens. Fingerprints are best removed with
lens cleaning paper. If condensation forms
on a cold lens when it is taken indoors, wait
for a few minutes until the moisture evapo­rates by itself.

›

Take the battery out of the camera if you do
not use it for a prolonged period.

30

Problem Cause Remedy

Lens does not move out. Battery inserted wrong way round. Replace battery.

No battery loaded. Check polarity marks.
Battery empty.

Film is not advanced Film leader too short. Pull out film leader until
to first frame. it reaches opposite end

of film compartment.

Picture blurred. Autofocus frame was not Align main frame with main subject.

aligned with main subject.

Highly shiny subject Recompose, if necessary lock
(water surface, focus on other subject
car paint or glass). at same distance.
Subject was behind glass.

Picture overexposed. Film used was not DX-coded. Only use DX-coded film.

Picture underexposed Autoflash mode disabled. Activate autoflash mode.
and blurred. Flash reflector obstructed by finger.

Film used was not DX-coded. Only use DX-coded film.

Film is not fully rewound. Insufficient battery capacity. Replace battery.

OVERCOMING PROBLEMS

31

TECHNICAL DATA
Type: Fully automatic autofocus compact viewfinder

camera with auto exposure, between-the-lens shutter
and zoom lens

Film type: 35 mm film with DX code (exposure format:
24 x 36 mm)

Lens Prego 100 WA: 3.6x zoom lens 1:5.8 – 10.5 /
28 – 100 mm; 6 elements in 6 groups
Lens Prego 130 WA: 4.6x zoom lens 1:5.8 – 11.5 /
28 – 130 mm; 7 elements in 6 groups
Shutter: Electronic programmed shutter with speeds
from 1 s – 1/ 500 s
Focussing: Passive autofocus with AF lock
– Focusing range: 0.65 m – infinity
– Macro range: 0.5 m – 1.0 m
Film speed setting: ISO 50/ 18° – 3200/36°
according to DX code
Viewfinder: Real-image zoom finder with AF meter­ing area

Magnification Prego 100 WA:

0.32x – 1.0 x

Magnification Prego 130 WA:

0.32x – 1.27 x
Flash: Integral electronic flash; recycle time approx.

8 s
Film transport: Automatic film advance and rewind;
rewind also possible before end of film.

Display: Large LCD monitor for all modes, e.g.:
– frame number
– auto flash
– fill-in flash
– flash off
– red-eye reduction
– slow shutter synch
– infinity
– macro
– self-timer
– remote control
– data imprinting
– battery status

Self-timer:

Exposure delay 10 s, up to 3 exposures in succession

Power economy:

Automatic switch-off after 5 minutes

Power supply: 1x 3 V lithium battery (CR 2)
Tripod thread: 1/4"
Dimensions (mm) Prego 100 WA:

W x H x D approx. 107 x 60 x 36

Dimensions (mm) Prego 130 WA:

W x H x D approx. 107 x 60 x 41.5

Weight Prego 100 WA: 175 g without battery
Weight Prego 130 WA: 180 g without battery

The manufacturer reserves the right to make technical
modifications.

32

80214.75.909

Prego 100 WA/

Prego 130 WA

GB • PA / RPM / 08-02

Rollei Fototechnic GmbH

P.O. Box 3245

D-38022 Braunschweig

www.rollei.de

Germany