Roland WM-1, WM-1D Owner’s Manual
Owner’s Manual
01
Contents
Panel Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3 |
WM-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3 |
Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3 |
Turning the WM-1 On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3 |
WM-1D.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3 |
Turning the WM-1D On.. . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3 |
Overview of the WM-1/WM-1D . . . . . . . . . . . . . . . . . . . . . |
4 |
WM-1 (Connected to MIDI Connector) . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
Connections.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
WM-1D (Connect to USB Port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
Connections.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
Setting the Communication Mode . . . . . . . . . . . . . . . . . . |
5 |
About the Two Communication Modes . . . . . . . . . . . . . . . . . |
5 |
Switching the Communication Mode. . . . . . . . . . . . . . . . . . |
5 |
About the MODE Indicator.. . . . . . . . . . . . . . . . . . . . . . . . . . |
5 |
Registering the MIDI Device to Use (Pairing) . . . . . . . . . . . . |
6 |
Using STANDARD (Host) Mode (Indicator Is Red). . . . . . . . . . . . . . |
6 |
Connecting the WM-1 with iPhone. . . . . . . . . . . . . . . . . . . . |
6 |
Connecting the WM-1 with Mac . . . . . . . . . . . . . . . . . . . . . . |
6 |
Connecting the WM-1 with a Windows Computer (WM-1D).. . . |
7 |
Using FAST Mode (Indicator Is Orange) . . . . . . . . . . . . . . . . . . . . . . |
7 |
Advanced Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
Switching Between STANDARD (Host) Mode and STANDARD |
|
(Remote) mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
Connecting Three Devices to One WM-1 (Multi Connection). . . . . |
8 |
Initializing the Unit’s Connection Settings.. . . . . . . . . . . |
9 |
Limitations.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
9 |
Main Specifications.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaflet “USING THE UNIT SAFELY”). After reading, keep the document(s) where it will be available for immediate reference.
© 2020 Roland Corporation
2
Panel Descriptions
WM-1
3 |
1 |
|
|
|
2 |
4
1CONNECT TO MIDI OUT jack
Connect this to your MIDI device’s MIDI OUT connector.
2CONNECT TO MIDI IN jack
Connect this to your MIDI device’s MIDI IN connector.
3[MODE] switch (MODE indicator)
Switches the WM-1’s mode.
The color of the indicator changes depending on the mode.
&“About the Two Communication Modes” (p. 5)
At the time of purchase, the WM-1 is set to “STANDARD (Host) mode..”
4Battery
Install one AAA battery.
Installing the Batteries
Battery cover
AAA battery
WM-1
(CONNECT TO MIDI IN side)
1.Remove the battery cover.
2.Taking care to observe the correct orientation of the batteries, insert the batteries into the battery case.
3.Close the battery cover.
*If you handle batteries improperly, you risk explosion and fluid leakage. Make sure that you carefully observe all of the items related to batteries that are listed in “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaflet “USING THE UNIT SAFELY”).
Battery replacement indicator
*When the battery is nearly worn out, the MODE indicator blinks red. Replace the new battery as soon as possible.
Turning the WM-1 On
1. Connect the WM-1 to your MIDI device, and poweron the connected device.
The power of the WM-1 turns on in tandem with the MIDI device.
Turning Off the Power
1. Turn off the power of the connected MIDI device.
The power of the WM-1 turns off in tandem with the MIDI device.
WM-1D
1
1USB port
Connect this to your computer’s USB port.
2[MODE] switch
Switches the mode of the WM-1D.
&“About the Two Communication Modes” (p. 5)
At the time of purchase, the WM-1D is set to “STANDARD (Remote) mode” (p. 8).
3MODE indicator
The color of the indicator changes depending on the mode.
&“About the Two Communication Modes” (p. 5)
Viewing the MODE indicator
View the indicator at a 45-degree angle from the USB connector of the WM-1D.
* If you view the indicator from directly above, it might be difficult to determine the color.
Turning the WM-1D On
1. Connect the WM-1D to your computer.
The unit powers-on, is detected as a general-purpose USB MIDI device, and the driver is installed automatically.
Turning Off the Power
1. Disconnect the WM-1D from your computer.
3
Loading...