Roland VersaUV LEF-200 First Step Manual
First Step Guide
Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please
be sure to read through this manual completely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specications of this product and the contents of this manual are subject to change without
notice.
• The manual and the product have been prepared and tested as much as possible. If you nd any
misprints or errors, please inform us.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may
occur through use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may
occur with respect to any article made using this product.
For the USA
FEDERAL COMMUNICATIONS COMMISSION RADIO
FREQUENCY INTERFERENCE STATEMENT
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Unauthorized changes or modication to this system can void
the users authority to operate this equipment.
Use only I/O cables that have been designed and manufactured
specically for this device.
For Canada
CAN ICES-3 (A)/NMB-3(A)
For California
WARNING
This product contains chemicals known to cause cancer, birth
defects and other reproductive harm.
For EU Countries
WARNING
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
For EU Countries
Manufacturer:
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken,
431-2103 JAPAN
The importer in the EU:
Roland DG EMEA, S.L.
Parc Tecnologic del Valles C/ Ceramistes, 6 08290 Cerdanyola del
Valles / Barcelona Spain
NOTICE
Grounding Instructions
• In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electric current to
reduce the risk of electric shock. This tool is equipped with an
electric cord having an equipment-grounding conductor and
a grounding plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
• Do not modify the plug provided - if it will not t the outlet,
have the proper outlet installed by a qualied electrician.
• Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. The conductor with
insulation having an outer surface that is green with or without
yellow stripes is the equipment-grounding conductor. If repair
or replacement of the electric cord or plug is necessary, do
not connect the equipment-grounding conductor to a live
terminal.
• Check with a qualied electrician or service personnel if the
grounding instructions are not completely understood, or if in
doubt as to whether the tool is properly grounded.
• Use only 3-wire extension cords that have 3-prong grounding
plugs and 3-pole receptacles that accept the tool’s plug.
• Repair or replace damaged or worn out cord immediately.
Operating Instructions
• KEEP WORK AREA CLEAN. Cluttered areas and benches invites
accidents.
• DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power
tools in damp or wet locations, or expose them to rain. Keep
work area well lighted.
• DISCONNECT TOOLS before servicing; when changing
accessories, such as blades, bits, cutters, and like.
• REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure
the switch is in o position before plugging in.
• USE RECOMMENDED ACCESSORIES. Consult the owner’s
manual for recommended accessories. The use of improper
accessories may cause risk of injury to persons.
• NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF.
Don’t leave tool until it comes to a complete stop.
This system (including the housing and safety device) is a Class 1 laser product
Complies with IEC 60825-1 Edition 2.0 (2007-03).
Complies with FDA performance standards for laser products except for deviations pursuant to Laser notice No.50 dated June 24, 2007.
Caution - Use of controls or adjustments or performance of procedures other than those specied herein may result in radiation exposure.
1
Contents
Contents .....................................1
Machine Highlights ...........................2
Documentation for This Machine .............2
About Roland OnSupport ....................2
Features of This Machine .....................3
Features of ECO-UV Inks .....................3
Features of Primer ...........................3
What You Can Do ............................4
To Ensure Safe Use ............................5
Pour utiliser en toute sécurité ................11
Important Notes on Handling and Use ........17
Printer Unit .................................17
Ink cartridges ..............................17
Part Names and Functions ....................18
Printer Unit .................................18
Front ...................................18
Rear ....................................18
Operation Panel ........................19
Names and Functions of Operation Panel Keys .. 19
Display Screen ..........................20
Prepare for Using This Printer .................21
STEP 1: Checking the Included Items ........21
STEP 2: Deciding on an Installation Site ......22
Temperature and Humidity .............23
Installation Space and Height ...........23
Air Ventilation ..........................23
STEP 3: Removing the Retainers .............24
STEP 4: Attaching the Pad tray ..............25
STEP 5: Connecting the Cables ..............26
STEP 6: Making the Initial Settings. . . . . . . . . . . 27
STEP 7: Filling with Ink for the First Time .....28
Installing the Ink Cartridges .............29
1. Clean the Print Heads Using SOL INK
Cleaning Cartridges .....................29
2. Insert the Ink Cartridges for the
Respective Colors .......................30
STEP 8: Network Settings ...................31
Introduction ............................31
Make the Network Settings for the Computer ....32
Make the Network Settings on the Printer ..33
Make the Port Settings for the RIP &
PRINT MANAGEMENT SOFTWARE .......35
First Time Printing ...........................36
Basic Operation Flow .......................36
Conditions for Usable Media ................37
Printable Area ..............................38
STEP 1:Turning the Power On ...............38
STEP 2:Loading Media and Setting the Height .. 39
1. Loading Media (Media Setup) .........39
2. Setting the Height of the Media
Automatically ..........................40
STEP 3: Printing Tests and Normal Cleaning ..41
1. Perform a Printing Test on Media for
Testing .................................41
2. Perform Normal Cleaning .............42
STEP 4: Performing Actual Printing ..........43
1. Perform “STEP 2:Loading Media and
Setting the Height” (P. 39) ...............43
2. Load the Print Area Set on This
Machine into VersaWorks Dual ..........43
3. Output Print Data Using VersaWorks
Dual ....................................44
STEP 5: Printing Tests and Normal Cleaning
after Daily Operations ......................48
STEP 6: Turning the Power O ...............48
Company names and product names are
trademarks or registered trademarks of their
respective holders.
http://www.rolanddg.com/
Copyright © 2016 Roland DG Corporation
2
Documentation for This Machine
The following documentation is included with the machine.
LEF-200 First Step Guide (this document)
This document explains from how to set up the machine to printing for the rst time. Be sure to read this
rst.
LEF-200 Master Guide
This document describes more detailed printing methods, as well as maintenance methods,
troubleshooting, and more.
Roland VersaWorks Dual Installation Guide
This document describes how to install and set up the included RIP & PRINT MANAGEMENT SOFTWARE
Roland VersaWorks Dual (hereinafter referred to as VersaWorks Dual) as well as the method of connection to
the printer.
Special Color Inks and Primer Guide
This document describes the special methods of creating printing data and performing printing when
using white ink, gloss ink or primer.
About Roland OnSupport
Installing Roland OnSupport on your computer enables you to receive your printer's ink status and error
information by email sent to your PC or mobile phone. You can also receive product updates and other
support information from OnSupport.
To install OnSupport, download it from the following URL.
http://download.rolanddg.jp/en/bn_onsupport.html
Machine Highlights
Machine Highlights
3
Features of This Machine
This machine is provided with the following features.
Also supports printing on thick materials
This printer can print on a variety of materials from thin paper to thick materials. Using UV ink, this printer
can print high-quality images on various types of media (the general name for the material to be printed
on).
Head gap sensor
The height of the media placed on the table can be set automatically or manually. Then the table's height
is automatically adjusted according to the height of the media so that high-quality images can be printed
safely.
Specication of the print-start location and the printing area using an LED
pointer
Using the LED pointer installed as a standard feature, you can easily and accurately specify the print-start
location and the printing area. You can also verify the printing area before you carry out printing, which can
help prevent failures when performing actual printing (preview feature).
Features of ECO-UV Inks
This printer uses ECO-UV inks. ECO-UV inks are xed to the media instantly by ultraviolet light. This makes it
possible to perform printing on media that is dicult to print on using conventional inks. ECO-UV inks are
available in a lineup of six colors (cyan, magenta, yellow, back, white, and gloss).
Features of Primer
Primer is a clear and colorless coating agent used as an ink base. By using primer as a base, you can print on
glass or other materials on which UV ink cannot be applied.
* Primer may not be fully ecient on some materials. Be sure to perform trial printing to check the eect.
Machine Highlights
4
What You Can Do
This section provides an overview of what you can do with this printer.
The illustrations below are just a few examples of items that can be printed with this printer.
* There is a limit to the unevenness of the print surface. For details, see the "Master Guide."
5
To Ensure Safe Use
Improper handling or operation of this machine may result in injury or damage
to property. Points which must be observed to prevent such injury or damage are
described as follows.
About of
WARNING and CAUTION Notices
WARNING
Used for instructions intended to alert the user to the risk of death or severe injury
should the unit be used improperly.
CAUTION
Used for instructions intended to alert the user to the risk of injury or material
damage should the unit be used improperly.
* Material damage refers to damage or other adverse eects caused with respect to the
home and all its furnishings as well as to domestic animals or pets.
About the Symbols
The symbol alerts the user to important instructions or warnings.
The specic meaning of the symbol is determined by the design contained within the
symbol.
The symbol at left means "danger of electrical shock."
The symbol alerts the user to items that must never be carried out (are forbidden).
The specic meaning of the symbol is determined by the design contained within the
symbol.
The symbol at left means the unit must never be disassembled.
The symbol alerts the user to things that must be carried out.
The specic meaning of the symbol is determined by the design contained within the
symbol.
The symbol at left means the power-cord plug must be unplugged from the outlet.
To Ensure Safe Use
6
WARNING
Be sure to follow the operation procedures
described in this documentation. Never
allow anyone unfamiliar with the usage or
handling of the machine to touch it.
Incorrect usage or handling may lead to an
accident.
Keep children away from the machine.
The machine includes areas and components
that pose a hazard to children and may result
in injury, blindness, choking, or some other
serious accident.
Never operate the machine while tired or
after ingesting alcohol or any medication.
Operation requires unimpaired judgment.
Impaired judgment may result in an accident.
Never use the machine for any purpose
for which it is not intended or use the
machine in an undue manner that exceeds
its capacity.
Doing so may result in injury or re.
For included items (optional and
consumable items, power cord, and the
like), use only genuine items compatible
with this machine.
Incompatible items may lead to an accident.
Before attempting cleaning, maintenance,
or attachment or detachment of optional
items, disconnect the power cord.
Attempting such operations while the
machine is connected to a power source may
result in injury or electrical shock.
Never attempt to disassemble, repair, or
modify the machine.
Doing so may result in re, electrical shock,
or injury. Entrust repairs to a trained service
technician.
CAUTION
Exercise caution to avoid being
pinched by or becoming caught in
the machine.
Inadvertently touching the machine can
result in hands being pinched or becoming
caught. Take care when operating the
machine.
Never attempt operation while wearing a
necktie, necklace, or loose clothing. Bind
long hair securely.
Such items may become caught in the
machine, resulting in injury.
Conduct operations in a clean, brightly lit
location.
Working in a location that is dark or cluttered
may lead to an accident, such as becoming
caught in the machine as the result of an
inadvertent stumble.
Never climb or lean on the machine.
The machine is not made to support a
person. Climbing or leaning on the machine
may dislodge components and cause them
to fall out.
Incorrect operation may cause injury
To Ensure Safe Use
7
WARNING
Connect the machine to an electrical outlet
that complies with this machine’s ratings
(for voltage, frequency, and current).
Incorrect voltage or insucient current may
cause re or electrical shock.
Power rating
Never use this machine outside or in any
location where exposure to water or high
humidity may occur. Never touch the
machine with wet hands.
Doing so may result in re or electrical shock.
Never allow any foreign object to get inside
the machine. Never expose to liquid spills.
Inserting objects such as coins or matches
or allowing beverages to be spilled into
the ventilation ports may result in re or
electrical shock. If anything gets inside,
immediately disconnect the power cord and
contact your authorized Roland DG Corp.
dealer.
Never place any ammable object near
the machine. Never use a combustible
aerosol spray near the machine. Never use
the machine in a location where gases can
accumulate.
Combustion or explosion may occur.
Handle the power cord, plug, and electrical
outlet correctly and with care. Never use
any damaged articles.
Using a damaged item may result in re or
electrical shock.
WARNING
When using an extension cord or power
strip, use one that adequately satises the
machine's ratings (for voltage, frequency,
and current).
Use of multiple electrical loads on a single
electrical outlet or use of a lengthy extension
cord may cause re.
Connect the machine to ground.
This can prevent re or electrical shock
due to current leakage in the event of a
malfunction.
Position the machine so that the power
plug is within immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency.
Install the machine next to an electrical
outlet. Also, provide enough empty space
to allow immediate access to the electrical
outlet.
If sparking, smoke, a burning odor, an
unusual sound, or abnormal operation
occurs, immediately unplug the power
cord. Never use the machine if any
component is damaged.
Continuing to use the machine may result in
re, electrical shock, or injury. Contact your
authorized Roland DG Corp. dealer.
Do not use the supplied power cord with
other products.
Danger of electrical short, electrical shock, or re
To Ensure Safe Use
8
Never place any object on top of or subject the power
cord to damage.
Never allow the power cord to get wet.
Never bend or twist the power cord with undue force. Never heat the power cord.
Never pull the power cord with undue force. Dust may cause re.
Never bundle, bind, or roll up the power cord.
Important notes about the power cord, plug, and electrical outlet
To Ensure Safe Use
9
In the event of ingestion or physical distress
• In the event of contact with the eyes, immediately ush with water for at least 15 minutes. If eye irritation
continues, seek treatment by a physician.
• In the event of contact with skin, immediately wash with soap. If irritation or inammation occurs, seek
treatment by a physician.
• In the event of ingestion, do not induce vomiting. Immediately seek treatment by a physician. Forcibly
inducing vomiting may lead to choking.
• If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or nausea
persists, seek treatment by a physician.
* Refer to the safety data sheet (SDS) for information on the chemicals contained in the ink and their safety.
Ink, cleaning uid, and discharged uid are ammable and toxic.
WARNING
Keep open ame away from the work area.
Ink and discharged uid are ammable.
Never store ink, cleaning liquid, or
discharged uid in any of the following
locations.
• Any location exposed to open ame
• Any location where high temperature may
occur
• Near bleach or any other such oxidizing agent
or explosive material
• Any location within the reach of children
Doing so may lead to a re. Accidental
ingestion by children may pose a health
hazard.
Never place an ink cartridge in re.
Ink may ow out, catch re, and spread re to
other nearby objects.
WARNING
Never drink or sni ink, cleaning uid, or
discharged uid, or allow them to come in
contact with the eyes or skin.
Doing so may be hazardous to your health.
CAUTION
Ensure adequate ventilation for the work
area.
Failing to perform ventilation may result in a
health hazard or danger of combustion due
to ink fumes.
Never subject ink cartridges to impacts or
attempt to disassemble them.
Ink may leak.
The total weight of this machine weighs 110 kg (242.5 lb.).
WARNING
Install the machine in a location that is
level, stable, and able to bear the weight of
the machine.
The total weight of the machine may reach
110 kg (242.5 lb.) or more. Installation in
an unsuitable location may cause a major
accident, including a tip over, fall, or collapse.
WARNING
Unloading and placement are operations
that must be performed by 4 persons or
more.
Tasks that require undue eort when
performed by a small number of persons
may result in physical injury. Dropping this
machine may result in injury.
To Ensure Safe Use
10
CAUTION
Never look at the blue-white (ultraviolet)
light emitted from the print-head area for an
extended time.
Looking directly at the ultraviolet light from up
close for an extended period may result in eye
injury.
Caution: Ultraviolet Light
This machine is tted with covers to keep
external leakage of ultraviolet light at low
levels, but incorrect handling or operation
can lead to physical injury due to ultraviolet
light. The extent of injury depends on the
intensity and wavelength of the ultraviolet
light and the length of time of exposure.
Prolonged exposure to strong ultraviolet light
of hazardous wavelengths can cause injury to
the eyes or skin. Exercise caution.
Warning labels are axed to the machine to make areas of danger immediately clear. The meanings of
these labels are as follows. Be sure to heed their warnings. Also, never remove the labels or allow them to
become dirty.
Ink Is Toxic
Ink and discharged uid are toxic. Avoid
contact with the body. Use only in a wellventilated area.
Flammable
Ink and discharged uid are ammable. Keep away from open ame.
Caution: Ultraviolet Light
Never look directly at the ultraviolet light
from up close for a prolonged period.
Caution: Pinching Hazard
Exercise caution to prevent
ngers from being pinched
when closing covers.
This machine uses ultraviolet light
Warning Labels
11
Pour utiliser en toute sécurité
La manipulation ou l’utilisation inadéquates de cet appareil peuvent causer des blessures ou des
dommages matériels. Les précautions à prendre pour prévenir les blessures ou les dommages sont décrites
ci-dessous.
Avis sur les avertissements
ATTENTION
Utilisé pour avertir l’utilisateur d’un risque de décès ou de blessure grave en
cas de mauvaise utilisation de l’appareil.
PRUDENCE
Utilisé pour avertir l’utilisateur d’un risque de blessure ou de dommage
matériel en cas de mauvaise utilisation de l’appareil.
* Par dommage matériel, il est entendu dommage ou tout autre eet indésir-
able sur la maison, tous les meubles et même les animaux domestiques.
À propos des symboles
Le symbole attire l’attention de l’utilisateur sur les instructions importantes ou les avertissements. Le
sens précis du symbole est déterminé par le dessin à l’intérieur du triangle. Le symbole à gauche signie
“danger d’électrocution.”
Le symbole avertit l’utilisateur de ce qu’il ne doit pas faire, ce qui est interdit. La chose spécique à ne
pas faire est indiquée par le dessin à l’intérieur du cercle. Le symbole à gauche signie que l’appareil ne
doit jamais être démonté.
Le symbole prévient l’utilisateur sur ce qu’il doit faire. La chose spécique à faire est indiquée par le
dessin à l’intérieur du cercle. Le symbole à gauche signie que le l électrique doit être débranché de la
prise.
Pour utiliser en toute sécurité
12
ATTENTION
S’assurer de suivre les procédures
d’utilisation décrites dans la
documentation. Ne jamais permettre
à quiconque ne connaît pas le
fonctionnement ou la manutention de
l’appareil de le toucher.
L’utilisation ou la manutention incorrectes
peuvent causer un accident.
Garder les enfants loin de l’appareil.
L’appareil comporte des zones et des
composants qui présentent un danger pour
les enfants et qui pourraient causer des
blessures, la cécité, la suocation ou d’autres
accidents graves.
Ne jamais faire fonctionner l’appareil
après avoir consommé de l’alcool ou des
médicaments, ou dans un état de fatigue.
L’utilisation de l’appareil exige un jugement
sans faille. L’utilisation avec les facultés
aaiblies pourrait entraîner un accident.
Ne jamais utiliser l’appareil à des ns autres
que celles pour lesquelles il est conçu. Ne
jamais l’utiliser de manière abusive ou
d’une manière qui dépasse sa capacité.
Le non-respect de cette consigne peut causer
des blessures ou un incendie.
Utiliser uniquement des accessoires
d’origine (accessoires en option, articles
consommables, câble d’alimentation et
autres articles semblables), compatibles
avec l’appareil.
Les articles incompatibles risquent de causer
des accidents.
Débrancher le câble d’alimentation avant
de procéder au nettoyage ou à l’entretien
de l’appareil, et avant d’y xer ou d’en
retirer des accessoires en option.
Tenter ces opérations pendant que l’appareil
est branché à une source d’alimentation peut
causer des blessures ou un choc électrique.
ATTENTION
Ne jamais tenter de démonter, de réparer
ou de modier l’appareil.
Le non-respect de cette consigne risque de
provoquer un incendie, un choc électrique
ou des blessures. Coner les réparations à un
technicien ayant la formation requise.
PRUDENCE
Faire preuve de prudence pour éviter
l’écrasement ou le coincement.
La main ou les doigts peuvent être écrasés ou
coincés s’ils entrent en contact avec certaines
surfaces par inadvertance. Faire preuve de
prudence pendant l’utilisation de l’appareil.
Ne jamais faire fonctionner l’appareil si
on porte une cravate, un collier ou des
vêtements amples. Bien attacher les
cheveux longs.
Ces vêtements ou ces objets peuvent être
coincés dans l’appareil, ce qui causerait des
blessures.
Utiliser l’appareil dans un endroit propre et
bien éclairé.
Travailler dans un endroit sombre ou
encombré peut causer un accident;
l’utilisateur risque, par exemple, de trébucher
malencontreusement et d’être coincé par
une partie de l’appareil.
Ne jamais grimper ni s’appuyer sur la
machine.
La machine n’est pas conçue pour supporter
le poids d’une personne. Grimper ou
s’appuyer sur la machine peut déplacer des
éléments et causer un faux pas ou une chute,
ce qui causerait des blessures.
L’utilisation incorrecte peut causer des blessures
Pour utiliser en toute sécurité
13
Risque de décharge ou de choc électrique, d’électrocution ou d’incendie
ATTENTION
Brancher à une prise électrique conforme
aux caractéristiques de cet appareil
(tension, fréquence et courant).
Une tension incorrecte ou un courant
insusant peuvent causer un incendie ou un
choc électrique.
Caractéristiques
Ne jamais utiliser à l’extérieur ni à un
endroit où l’appareil risque d’être exposé
à de l’eau ou à une humidité élevée. Ne
jamais toucher l’appareil avec des mains
mouillées.
Le non-respect de cette consigne risque
de provoquer un incendie ou un choc
électrique.
Ne jamais insérer d’objet étranger dans
l’appareil. Ne jamais exposer l’appareil aux
déversements de liquides.
L’insertion d’objets comme des pièces
de monnaie ou des allumettes, ou le
déversement de liquides dans les orices
de ventilation peuvent causer un incendie
ou un choc électrique. Si un objet ou du
liquide s’inltre dans l’appareil, débrancher
immédiatement le câble d’alimentation et
communiquer avec le représentant Roland
DG Corp. autorisé.
Ne jamais placer d’objet inammable à
proximité de l’appareil. Ne jamais utiliser de
produit inammable en aérosol à proximité
de l’appareil. Ne jamais utiliser l’appareil
dans un endroit où des gaz peuvent
s’accumuler.
Une combustion ou une explosion
pourraient se produire.
ATTENTION
Manipuler le câble d’alimentation, la che
et la prise électrique correctement et avec
soin.
Ne jamais utiliser un article endommagé, car
cela pourrait causer un incendie ou un choc
électrique.
Si une rallonge ou une bande
d’alimentation électrique sont utilisées,
s’assurer qu’elles correspondent aux
caractéristiques de l’appareil (tension,
fréquence et courant).
L’utilisation de plusieurs charges électriques
sur une prise unique ou une longue rallonge
peut causer un incendie.
Mise à la terre.
La mise à la terre peut prévenir un incendie
ou un choc électrique dus à une fuite de
courant en cas de défaillance.
Placer l’appareil de façon à ce que la che
soit facile d’accès en tout temps.
Ainsi, l’appareil pourra être débranché
rapidement en cas d’urgence. Installer
l’appareil près d’une prise électrique. En
outre, prévoir susamment d’espace pour
que la prise électrique soit facile d’accès.
S’il se produit des étincelles, de la fumée,
une odeur de brûlé, un bruit inhabituel ou
un fonctionnement anormal, débrancher
immédiatement le câble d’alimentation.
Ne jamais utiliser si un composant est
endommagé.
Continuer à utiliser l’appareil peut
causer un incendie, un choc électrique
ou des blessures. Communiquer avec le
représentant Roland DG Corp. Autorisé.
Ne pas utiliser le cordon électrique fourni
avec d’autres produits.
Pour utiliser en toute sécurité
14
Ne jamais déposer aucun objet sur le câble, sur la che
ou sur la prise car cela risque de les endommager.
Ne jamais laisser l’eau toucher le câble, la che ou la
prise.
Ne jamais plier ni tordre le câble avec une force
excessive.
Ne jamais chauer le câble, la che ou la prise.
Ne jamais tirer sur le câble ou la che avec une force
excessive.
La poussière peut causer un incendie.
Ne jamais plier ni enrouler le câble.
Remarques importantes à propos du câble d’alimentation, de la che et de la prise électrique
Loading...