
CUBE KIT app
No, we’ve saved the best for last! You might of noticed that the amp at first
glance does not have a memory function. But we’ve got a trick up our
sleeve. Let’s say that the guitarist is moving along and starts to figure out
the amp tone he really wants. The most iconic tones are usually from a
handful of legendary amps. Does he needs to buy a new amp
immediately? Perhaps the best route is two 4x12s and a 100watt head but
until then the CUBE KIT app will get them one step closer!
The CUBE KIT app runs on both iOS and Android devices and lets you import new amp
tones into your CUBE-10GX. It’s very simple, you connect the headphone out from your
portable device to the input of the amp via normal guitar cable and converter jack(this
converter jack is included with the amp).

Next, start up the amp in import mode and select the amp tone you want to from the app. The
new amp tone will be loaded into the position of one the three standard amp tone: clean,
crunch or lead. So with the app you can change the stock lead tone into the lead tone of a
Mesa stack. Take a look at all the different amp types below, you’ll recognise most
immediately, the decryptions are listed and you’ll also notice there’s a model for both
acoustic and bass guitar too.
JC CLEAN: This is a model of Roland’s famous JC-120 Jazz Chorus guitar
amplifier. * Same as preset amp type “Clean”.
BLACK PANEL: This is modeled on the classic Fender Twin Reverb amplifier.
BRIT COMBO: This is modeled on the Vox AC-30TB.
TWEED: This is modeled on the vintage Fender Tweed Bassman 4 x 10”
Combo.
CLASSIC STACK: This is modeled on the features of a Marshall JMP 1987.*
Same as preset amp type “Crunch”.
ORNG STACK: This is modeled on the dirty channel of an ORANGE
ROCKERVERB.
METAL STACK: This is modeled on the Peavey EVH 5150.
R-FIER STACK: This super high-gain amp is modeled on the Mesa/Boogie
Rectifier.* Same as preset amp type “Lead”.
ACOUSTIC GUITAR AMP: This is an original amp for acoustic guitar.
BASS AMP: This is an original amp for BASS.
Waw, so you can start off with some basic amp tone that provide everything you need to start
off with and move on to some modelled legend amp tones. All in an entry level Cube amp.