Roland CUBE-100 Bass User Manual
Owner’s Manual
Thank you, and congratulations on your choice of the Roland CUBE-100 BASS Amplifier.
These sections provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of every feature provided
by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and
kept on hand as a convenient reference.
Before using this unit, carefully read the sections entitled
• IMPORTANT SAFETY INSTRUCTIONS (p. 2)
• USING THE UNIT SAFELY (p. 3–p. 4)
• IMPORTANT NOTES (p. 4).
This unit is equipped with a protection circuit.
The protection circuit helps ensure safety by operating when excessive input continues for a long
time while the device is at a location with a high ambient temperature. Sound drop-out may occur
when the protection circuit is actuated during use.
Please read through the documentation carefully to ensure correct use.
Main Features
●
Adopting Roland’s original FFP technology, this highly functional DSP bass amp features 100-watt
sound output through the newly developed 30 cm (12-inch) coaxial 2-way wide-range speaker.
●
The amp is equipped with a total of eight COSM amp model types, including seven of the most
popular bass amps along with a newly developed SUPER FLAT.
SUPER FLAT
suitable for use with upright basses.
●
In addition to an easy-to-use 4-band equalizer, this amp features a SHAPE function for even
greater flexibility in creating sounds and rich sound variation.
●
The amp is equipped with a total of three bass effect systems, including COMPRESSION, an EFX
system with CHORUS, FLANGER, and T-WAH, and basic DELAY/REVERB.
●
In addition to RECORDING OUT/PHONES jack with high-quality sound modeling, the CUBE-
100 BASS is also equipped with professional quality BALANCED OUT, LINE OUT, and TUNER
OUT, and EXTERNAL SPEAKER jacks. With such expandability, this amp can be used for a wide
variety of applications, from home recording to live performances.
FFP (Feed Forward Processing)
the amp, speakers, and cabinet characteristics according to the signals being input, based on the
results of analyses of the operation and behavior of each section of existing amp systems.
COSM (Composite Object Sound Modeling)
modeling technology. COSM analyzes the many factors that make up the original sound, such as
the electrical and physical characteristics of the original, and then produces a digital model that
can reproduce the same sound.
* All product names mentioned in this document are trademarks or registered trademarks of their
respective owners.
Copyright © 2004 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
is an original amp type that features a wide-range frequency and faithful response
is system control technology that optimizes the performance of
is Roland’s innovative and powerful sound
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
For the U.K.
WARNING:
IMPORTANT:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
THIS APPARATUS MUST BE EARTHED
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE
USING THE UNIT SAFELY
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
001
• Before using this unit, make sure to read the instructions below, and the Owner’s Manual.
................................................................................................................................................................
Add
• Connect mains plug of this model to a mains socket
outlet with a protective earthing connection.
................................................................................................................................................................
002a
• Do not open or perform any internal modifications on
the unit.
................................................................................................................................................................
003
• Do not attempt to repair the unit, or replace parts within it
(except when this manual provides specific instructions
directing you to do so). Refer all servicing to your retailer,
the nearest Roland Service Center, or an authorized
Roland distributor, as listed on the “Information” page.
................................................................................................................................................................
004
• Never use or store the unit in places that are:
• Subject to temperature extremes (e.g., direct sunlight
in an enclosed vehicle, near a heating duct, on top of
heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on wet floors); or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
................................................................................................................................................................
007
• Make sure you always have the unit placed so it is level
and sure to remain stable. Never place it on stands that
could wobble, or on inclined surfaces.
................................................................................................................................................................
008a
• The unit should be connected to a power supply only of
the type described in the operating instructions, or as
marked on the rear side of unit.
................................................................................................................................................................
009
• Do not excessively twist or bend the power cord, nor
place heavy objects on it. Doing so can damage the cord,
producing severed elements and short circuits.
Damaged cords are fire and shock hazards!
................................................................................................................................................................
010
• This unit, either alone or in combination with an
amplifier and headphones or speakers, may be capable
of producing sound levels that could cause permanent
hearing loss. Do not operate for a long period of time at
a high volume level, or at a level that is uncomfortable.
If you experience any hearing loss or ringing in the ears,
you should immediately stop using the unit, and consult
an audiologist.
................................................................................................................................................................
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
011
• Do not allow any objects (e.g., flammable material,
coins, pins); or liquids of any kind (water, soft drinks,
etc.) to penetrate the unit.
........................................................................................................................................
012a
• Immediately turn the power off, remove the power cord
from the outlet, and request servicing by your retailer, the
nearest Roland Service Center, or an authorized Roland
distributor, as listed on the “Information” page when:
• The power-supply cord, or the plug has been
damaged; or
• If smoke or unusual odor occurs
• Objects have fallen into, or liquid has been spilled
onto the unit; or
• The unit has been exposed to rain (or otherwise has
become wet); or
• The unit does not appear to operate normally or
exhibits a marked change in performance.
........................................................................................................................................
013
• In households with small children, an adult should
provide supervision until the child is capable of following
all the rules essential for the safe operation of the unit.
........................................................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
........................................................................................................................................
015
• Do not force the unit’s power-supply cord to share an
outlet with an unreasonable number of other devices. Be
especially careful when using extension cords—the total
power used by all devices you have connected to the
extension cord’s outlet must never exceed the power
rating (watts/amperes) for the extension cord. Excessive
loads can cause the insulation on the cord to heat up and
eventually melt through.
........................................................................................................................................
016
• Before using the unit in a foreign country, consult with your
retailer, the nearest Roland Service Center, or an authorized
Roland distributor, as listed on the “Information” page.
........................................................................................................................................
026
• Do not put anything that contains water (e.g., flower
vases) on this unit. Also, avoid the use of insecticides,
perfumes, alcohol, nail polish, spray cans, etc., near the
unit. Swiftly wipe away any liquid that spills on the unit
using a dry, soft cloth.
........................................................................................................................................
3
101a
• The unit should be located so that its location or
position does not interfere with its proper ventilation.
.........................................................................................................................................
102a
• Always grasp only the plug on the power-supply cord
when plugging into, or unplugging from an outlet.
.........................................................................................................................................
103a
• At regular intervals, you should unplug the power plug
and clean it by using a dry cloth to wipe all dust and other
accumulations away from its prongs. Also, disconnect the
power plug from the power outlet whenever the unit is to
remain unused for an extended period of time. Any
accumulation of dust between the power plug and the
power outlet can result in poor insulation and lead to fire.
.........................................................................................................................................
104
• Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be placed
so they are out of the reach of children.
.........................................................................................................................................
106
• Never climb on top of, nor place heavy objects on the
unit.
........................................................................................................................................
107a
• Never handle the power cord or its plug with wet hands
when plugging into, or unplugging from, an outlet.
........................................................................................................................................
108a
• Before moving the unit, disconnect the power plug from
the outlet, and pull out all cords from external devices.
........................................................................................................................................
109a
• Before cleaning the unit, turn off the power and unplug
the power cord from the outlet (p. 4).
........................................................................................................................................
110a
• Whenever you suspect the possibility of lightning in
your area, pull the plug on the power cord out of the
outlet.
........................................................................................................................................
IMPORTANT NOTES
291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2, 3 and 4,
please read and observe the following:
Power Supply
301
Do not connect this unit to same electrical outlet that is being used by an
•
electrical appliance that is controlled by an inverter (such as a refrigerator,
washing machine, microwave oven, or air conditioner), or that contains a
motor. Depending on the way in which the electrical appliance is used,
power supply noise may cause this unit to malfunction or may produce
audible noise. If it is not practical to use a separate electrical outlet, connect
a power supply noise filter between this unit and the electrical outlet.
307
Before connecting this unit to other devices, turn off the power to all units. This
•
will help prevent malfunctions and/or damage to speakers or other devices.
308
Although the LEDs are switched off when the POWER switch is switched
•
off, this does not mean that the unit has been completely disconnected
from the source of power. If you need to turn off the power completely,
first turn off the POWER switch, then unplug the power cord from the
power outlet. For this reason, the outlet into which you choose to connect
the power cord’s plug should be one that is within easy reach.
Placement
351
•
Using the unit near power amplifiers (or other equipment containing large
power transformers) may induce hum. To alleviate the problem, change the
orientation of this unit; or move it farther away from the source of interference.
352a
•
This device may interfere with radio and television reception. Do not use
this device in the vicinity of such receivers.
352b
Noise may be produced if wireless communications devices, such as cell
•
phones, are operated in the vicinity of this unit. Such noise could occur
when receiving or initiating a call, or while conversing. Should you
experience such problems, you should relocate such wireless devices so
they are at a greater distance from this unit, or switch them off.
354b
Do not expose the unit to direct sunlight, place it near devices that radiate
•
heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used
while their light source is very close to the unit (such as a piano light), or
powerful spotlights to shine upon the same area of the unit for extended
periods of time. Excessive heat can deform or discolor the unit.
355b
•
When moved from one location to another where the temperature and/or
humidity is very different, water droplets (condensation) may form inside
the unit. Damage or malfunction may result if you attempt to use the unit
in this condition. Therefore, before using the unit, you must allow it to
stand for several hours, until the condensation has completely evaporated.
356
Do not allow rubber, vinyl, or similar materials to remain on the unit for
•
long periods of time. Such objects can discolor or otherwise harmfully
affect the finish.
359
•
Do not paste stickers, decals, or the like to this instrument. Peeling such
matter off the instrument may damage the exterior finish.
Maintenance
401a
•
For everyday cleaning wipe the unit with a soft, dry cloth or one that has
been slightly dampened with water. To remove stubborn dirt, use a cloth
impregnated with a mild, non-abrasive detergent. Afterwards, be sure to
wipe the unit thoroughly with a soft, dry cloth.
402
Never use benzine, thinners, alcohol or solvents of any kind, to avoid the
•
possibility of discoloration and/or deformation.
Additional Precautions
553
Use a reasonable amount of care when using the unit’s buttons, sliders, or
•
other controls; and when using its jacks and connectors. Rough handling
can lead to malfunctions.
556
When connecting / disconnecting all cables, grasp the connector itself—
•
never pull on the cable. This way you will avoid causing shorts, or damage
to the cable’s internal elements.
557
•
A small amount of heat will radiate from the unit during normal operation.
558a
•
To avoid disturbing your neighbors, try to keep the unit’s volume at
reasonable levels. You may prefer to use headphones, so you do not need to
be concerned about those around you (especially when it is late at night).
559a
•
When you need to transport the unit, package it in the box (including
padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials.
921
To prevent malfunction and/or damage to speakers or other devices,
•
always turn down the volume, and turn off the power on all devices before
making any connections.
941
Once the connections have been completed, turn on power to your various
•
devices in the order specified. By turning on devices in the wrong order,
you risk causing malfunction and/or damage to speakers and other
devices.
1. Turn on the device connected to the CUBE’s input jack.
2. Turn on the CUBE.
3. Switch on any equipment connected to the CUBE’s LINE OUT,
RECORDING OUT/PHONES and BALANCED OUT jacks.
Turn off the devices in the reverse order to which they were switched on.
•
Wrap the power cord around the cord hook when trans-porting or storing
the unit.
Do not insert hands, fingers, etc, into the openings in the unit. In particular,
•
if the unit is to used in households with small children, always provide
adult supervision to ensure that children keep their hands and feet out of
these openings.
4
Loading...