Roland C-380 User Manual
Copyright © 2010 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
Roland is a registered trademark of Roland Corporation in the United States and/or other countries.
Shortcuts
Quick Manual
This manual explains the most important
operations. Refer to the owner’s manual
for details on these and other operations.
Playing the Organ
Let’s start by performing with a organ sound.
By using these shortcuts you can directly access a desired screen without going through a menu screen.
Settings for the
USER/MIDI Couplers
(USER/MIDI Coupler screen)
[SET] piston
While holding and following operation
Setting the playing or
recording
(Song Recorder screen)
Press
3. Adjust the sound.2. Select a stop (sound).1. Turn on the power.
When the power is turned on,
the main screen will appear in
the display.
Immediately after the power is
turned on, no stops are selected,
meaning that the keyboard will
not produce sound.
Pedalboard Stop Lower Manual Stop Upper Manual Stop
Press the upper part of the
tablet to turn off the stop.
Press the lower part of the
tablet to select the stop.
Volume of the
Satellite Speakers
Master Volume
Selecting a Sound Variation (Voice Palette)
Reverberation
Listening to the demo songs
(Demo screen)
[PLAY/PAUSE] piston
Press
Setting the melody coupler
(Console screen)
[MEL] piston
Press
Setting the expression pedal
(Exp. Pedal screen)
Operate
Adjusting the external devices sound
(Audio screen)
[Master Volume] knob
Turn Turn
Setting the bass coupler
(Console screen)
[BASS] piston
Press
Setting the tremulant
(Tremulant screen)
[TREMULANT] tablet
Setting the reverb
(Room Modeling screen)
[Reverb] knob
Changing the tuning or pitch
(Pitch/Tuning screen)
Press
Storing your settings
(Custmize)
[0] piston
PressPress
By pressing a tablet, you can choose between variations of the sound for the selected stop.
1. Press a tablet.
Press the lower part
Pedalboard Stop Lower Manual Stop Upper Manual Stop
Main Screen
If the Voice Palette screen does not appear,
press the [Value/Exit Menu] knob several times
to access the main screen (which shows the
memory bank), and then proceed as above.
2. The voice palette screen will appear.
Selected stop name
Currently selected
variation
3. Select a variation.
Choose from four variations, VP0
through VP3.
Turn
Storing Your Favorite Settings
Menu List * For details, refer to the Owner’s Manual.
All settings for the upper manual, lower manual, and pedalboard can be stored together in one of the general pistons — .
Storing Recalling Turning the settings off
While holding
The state of the general memory [1]–[5]
pistons can be stored as a “memory bank.”
Press
The piston sets the organ to the condition in which all
tablets and couplers are cancelled so that no sounds are
selected. This piston is also called the “cancel piston.”
Press
On the C-380, you can store only the each
manual settings to a “division memory piston.”
Press
Setting category
1 Demo
2 Pitch/Tuning
3 Song Recorder
4 Room Modeling
5 USER/MIDI Coupler
6 Console
Contents of the category
• Listen to demo songs
• Settings for pitch and Temperament
• Recording settings
• Play back settings
• Saving, deleting, and copying song data
• Reverb settings
• USER coupler settings
• MIDI coupler settings
• Display contrast
• V-LINK setting
• MEL and BASS coupler settings
Detailed items
Group
Song
Tempo
Satellite VR
Pitch
Temperament
Tuning
Transpose
Song
Tempo
Measure
Play Mode
Devision Mute
Metronome Volume
Beat
Save Song
Delete Song
Copy Song
Room Type
Wall Type
* Details of the available items will depend on the Source/MIDI CH
setting. For details, refer to the Owner’s Manual.
Display Contrast
V-LINK
Bass Split
Mel Split
Making Settings in the Menus
Heres how to make settings using the menus.
1. Access the menu. 2. Select the item. 3. Enter the item.
Press
Turn Turn
Press
4. Change the setting.
7 Tremulant
8 Exp. Pedal
9 Audio
10 MIDI
11 Save/Load (USB)
• Tremulant settings
• Expression pedal settings
• External device settings
• MIDI settings
• Save/load the contents
• Format the USB Memory
• Factory Reset
Depth
Rate
MAN-I/Pedal
MAN-II
Shutter
Kick SW R
Kick SW L
Exp.Mode
Aux In Volume
Aux In Reverb
Line Out Gain
Local
Tone Name
Tx Piston
Save Memory Bank
Load Memory Bank
Copy Memory Bank
Delete Memory Bank
Save Voice Setup
Load Voice Setup
Delete Voice Setup
Format USB Memory
Factory Reset
5. Put the setting
into effect.
Press Press
If a Yes/No confirmation
screen appears
• Cancel the setting.
• Return to the previous menu.
Loading...