PTSVNWUâ
5
6;9;F3> :3DBE;5:AD6
It’s a Fact…
The Roland, C-80 Digital Harpsichord, reproduces the beautiful and clear sound of the Flemish harpsichord:
•61 keys with “click” action, F scale
•MIDI Capability
•Stereo Headphone Jacks
•A-440Hz / baroque pitch (A=415Hz)
•56 Voice Polyphonic
Adjusting the Volume
Use the following procedure to adjust the volume:
1)[Turn] the volume knob, located to the right of the power switch, to adjust the volume.
(Refer to Owner’s Manual-page 16, for “Adjusting the volume”.)
Selecting a Sound/Tone
Use the following procedure to select any of the eight Sound/Tone:
1)[PRESS] a desired Sound/Tone
(Refer to Owner’s Manual-page 16, for “Selecting Sounds/Tone”.)
Listening to the Demonstration Songs
Use the following procedure to listen to one of the three Demo Songs:
1)[PRESS] and [HOLD] the function button, and press the [DEMO] button. (Playback will begin.)
2)During playback, you can advance to the next song by pressing the [DEMO] button.
3)To [STOP] playback, press the [DEMO] button.
(Refer to Owner’s Manual-page 22, for “Listening to demo songs and song list”.)
Adding Reverberation
Use the following procedure to select Reverb:
1)Use the [REVERB] knob to adjust the amount of the reverb effect.
(Refer to Owner’s Manual-page 20, for “Adding Reverberation”.)
7XUER6WDUW
Using Baroque Pitch
Use the following procedure to use the Baroque pitch:
1)Press the [BAROQUE PITCH] button.
(Refer to Owner’s Manual-page 18, for “Using the Baroque Pitch”.)
Selecting a Temperament
Use the following procedure to select one of the eight Temperaments:
1)Press the [TEMPERAMENT] button to select one of the eight Temperaments.
Note: At power-up, the C-80 Digital Harpsichord always reverts to [Equal], the default temperament
(Refer to Owner’s Manual-page 18, for “Selecting a Temperament”. )
Transposing the keyboard
Use the following procedure to Transpose:
1)Hold down the [FUNCTION] button.
2)Press the [NOTE] that corresponds to the desired key.
(Refer to Owner’s Manual-page 25, for “Transposing the keyboard” information.)
Raising / Lowering the Keyboard by an Octave:
Use the following procedure to raise or lower the keyboard by an Octave:
1)Hold down the [FUNCTION] button.
2)Press either the [UP] button or [DOWN] button.
(Refer to Owner’s Manual-page 24, for “Raising/Lowering the Keyboard by an Octave” information.)
© 2000 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 |
Faxback # 20129 |