Regulator ICs
DC / DC converter unit
BP51L05 / BP51L12
The BP51L05 and BP51L12 are DC / DC converter units that use a pulse width modulation (PWM) system. They contain
built-in control circuits, switching devices, rectifiers, and coils, and operate if only an I / O smoothing capacitor is connected. With a wide range of input voltage, the ICs are best suited for obtaining a stable local power source from a main
power supply with a large voltage variation.
Applications
Power supplies for copiers, personal computers, word processors, industrial equipment, and maintenance tools
Features
1) Wide range of input voltage.
2) High power conversion efficiency .
Absolute maximum ratings
3) Heat sink unnecessary.
4) Compact SIP 9-pin package.
321
Regulator ICs BP51L05 / BP51L12
FElectrical characteristics
S BP51L05 (unless otherwise noted, V
I = 15V, IO = 50mA, and Ta = 25_C)
S BP51L12 (unless otherwise noted, V
I = 15V, IO = 50mA, and Ta = 25_C)
FBlock diagram and measurement circuit
322
Regulator ICs BP51L05 / BP51L12
FPin descriptions
FOperation notes
(1) Reduce output current according to an increase in
ambient temperature. Use the IC within the derating
curve range.
(2) Sudden power increase at the input pin (pin 9) results in increased rush current, and may cause damage
to the hybrid IC and overshooting of output voltage.
Check for this problem, which is dependent on the rise
time of input power supply and load conditions, in the actual application. As a guide, input power supply of 10ms
or greater is required against rush current, and 100ms or
greater against overshooting. Suppress the peak value
of rush current to 2A or less.
(3) Pins 2 to 7 are ground pins that are connected to
each other internally . Not all pins have to be used.
(4) The IC contains no circuit to protect the output current. If short circuit is feared, use the ICP or other protection measures.
FElectrical characteristic curves
SBP51L05
323
Regulator ICs BP51L05 / BP51L12
SBP51L12
FExternal dimensions (Units: mm)
324
Loading...