Rockwell Automation 1494V-DS200, 1494V-DSX200 User Manual
Product Information
Bulletin 1494V Variable Depth 200A Disconnect Switch
(Cat 1494V-DS200; 1494V-DSX200 -- Series D)
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.
The following procedures are critical to the proper operation of the disconnect handle and switch. Failure to follow these steps can result in damage to the equipment and/or serious injury or death to the operator.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of malfunction or
damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.
ATTENTION: Do not install, congure, operate or maintain this product until you have read the product documentation and the documents in the Additional Resources section for installing, conguring, operating or maintaining
equipment. To get the product documentation go to http://www.literature.rockwellautomation.com or contact your local sales oce or Rockwell Automation representative.
ATTENTION: Ne pas installer, congurer, exploiter ou maintenir ce produit tant que vous n’avez pas lu sa documentation et les documents de la rubrique Documents connexes pour l’installation, la conguration, l’exploitation et la
maintenance de l’équipement. Pour obtenir de la documentation, rendez-vous sur le site http://www.literature.rockwellautomation.com ou contactez votre agence commerciale Rockwell Automation locale ou son représentant.
ACHTUNG: Für die Installation, Konguration, den Betrieb und die Wartung dieses Produkt lesen Sie sich bitte zunächst die Produktdokumentation sowie die Dokumente im Abschnitt „Weitere Informationen“ durch. Die
entsprechende Produktdokumentation nden Sie unter http://www.literature.rockwellautomation.com oder kontaktieren Sie Ihr lokales Vertriebsbüro bzw. einen Rockwell Automation-Mitarbeiter.
ATENCIÓN: No instale, congure, opere ni mantenga este producto hasta que haya leído la documentación del producto y los documentos en la sección Recursos adicionales para la instalación, conguración, operación o
mantenimiento de equipo. Para conseguir la documentación, diríjase a http://www.literature.rockwellautomation.com o póngase en contacto con su ocina regional de ventas o representante de Rockwell Automation.
ATENÇÃO: Não instale, congure, opere ou mantenha este produto até que você leia a documentação do produto e os documentos na seção Recursos adicionais para a instalação, conguração, operação ou manutenção do
equipamento. Para conseguir a documentação, visite http://www.literature.rockwellautomation.com ou entre em contato con seu escritório de vendas regional ou representante da Rockwell Automation.
ATTENZIONE: Non installare, congurare, attivare o riparare questo prodotto senza avere prima letto la relativa documentazione nonchè i documenti indicati nella sezione Ulteriori Risore riguardanti l’installazione, la congurazione,
l’attivazione o la riparazione dell’apparecchiatura. Per la documentazione sul prodotto visitare il sito http://www.literature.rockwellautomation.com o contattare l’ucio vendite o il rappresentate Rockwell Automation di zona.
http://www.literature.rockwellautomation.com
http://www.literature.rockwellautomation.com
http://www.literature.rockwellautomation.com
Additional Resources:
1) Go to http://www.literature.rockwellautomation.com; 2) Go to Search. Type in publication number: PN-47400
Disconnect Switch Installation (Right hand installation shown. For left hand installation follow similar procedure.)
1
Use template A to locate handle holes on mounting plate.
4
DLE HOLE
TOP HAN
2
MEASURE TO
TAPE
INSIDE OF THE
TOP OF ENCLOSURE
OF ENCLOSURE
A
HOLD FLUSH
TO INSIDE
BOTTOM HAND
3
LE HOLE
MEASURE TO
INSIDE OF THE
TOP OF ENCLOSURE
A
HOLD FLUSH
TO INSIDE
OF ENCLOSURE
TOP
BOTT
1
Overlay template C over A .
5
2 - 1/4"
HOLD FLUSH
TO INSIDE
MEASURE TO
INSIDE OF THE
OF ENCLOSURE
Switch Mounting Holes
TOP OF ENCLOSURE
Center punch and drill (4) 11/64" holes for
tap-tite screws provided with
5 - 1/4"
A
C
6
Center punch and
drill (4) 7/32" Dia. holes
for thread forming
(TAP-TITE) screws
provided with switch.
3 - 1/16"
TOP
2 - 1/4"
switch
4 - 11/16"
BOTT
1
Mount disconnect switch.
7
40 - 60 lb-in
Disconnect Handle Installation
2
Install gasket.
1
Install handle and spring bracket.
2
30 - 40 lb-in
Install defeater lever.
3
7 - 11 lb-in
Cutting Connecting Rod
3
Measure working depth of enclosure.
1
Mounting
Plate
Connecting Rod Installation
4
Verify that disconnect switch and handle are in "OFF"
1
position. (Switch blades will be visible.)
Enclosure
Working Depth
(Inside Flange
of Enclosure to
Mounting Plate)
N
Measure, mark and
2
cut connecting rod.
N minus 3-1/4"
Remove burrs
3
4
Push rod down and
verify if rod is
approximately 1/8"
from touching bottom of
bolt head.
(If not, rotate rod up to
3
5 full turns)
1/8" Gap
Rotate connecting rod into
drive bar (13) full turns.
Connecting
Rod
6
5
2
Hitch Pin
Drive Bar
7
6
5
Primary Link
8
Trailer Fuse Block Installation
5
Go to Installation Instruction Sheet PN-47400.
ATTENTION: Check for proper operation.
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 1494V-IN101E-EN-E - January 2013
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
DIR 42052-143 (Version 05)
PN-133639
Loading...