Rocktron Gainiac 2 User Manual

Your Gainiac 2 has been tested and complies with the following Standards and Directives as set forth by the European Union:
Council Directive(s): 89/336/EEC Electromagnetic Compatibility
Standard(s): EN55013, EN50082-1
This means that this product has been designed to meet stringent guidelines on how much RF energy it can emit, and that it should be immune from other sources of interference when properly used. Improper use of this equipment could result in increased RF emissions, which may or may not interfere with other electronic products.
For more information about other Rocktron products, please see your local dealer or one of our importers closest to you (listed on the enclosed warranty sheet).
Copyright © 2005 GHS Corporation All Rights Reserved.
Introduction
Congratulations on your purchase of the Rocktron Gainiac 2 tube preamp! The name itself indicates a product that provides the most intense distortion and power that the modern guitar player requires to perform to the fullest extent.
With over 100dB of outrageous gain, this tube preamp has two channels with the most intense distortion and power that you need to perform at full throttle! Equipped with Rocktron's unique "Scoop" control, the Gainiac lets you go from the classic sounds of the 60's and 70's all the way to the raging atomic sound of modern metal.
The Gainiac 2 is our latest version of this world famous tube preamp. Now with a more modern sound, and an extra control for the clean channel (sepa­rate master volume). And BONUS - more headroom so you get even more gain than ever before!!
Featuring the most effective EQ section ever devised, the Gainiac 2 allows over 30dB cut, or "scooping" of the midrange used with the bass (Bottom control) and treble (Top control) as needed by your cabinet. Guitar tones just can't get any heavier . ( In the Gainiac 2, Rocktron has improved the mid scoop on the distortion!) Back off the Scoop control and your sound rolls up into a much fatter, rounder sound. The Gainiac 2 adds three band EQ to the clean sound as well and the clean sound now runs through the tube for more warmth!
Join the legion of Gainiac maniacs and increase the pallete of tones you're stuck with in that combo amp of yours by adding the Gainiac 2 to your setup. The Gainiac is easy to hook up and use.
OPERATING PRECAUTIONS
NOTE: IT IS VERY IMPORTANT THAT YOU READ THIS SEC­TION TO PROVIDE YEARS OF TROUBLE FREE USE. THIS UNIT REQUIRES CAREFUL HANDLING.
All warnings on this equipment and in the operating instructions should be adhered to and all operating instructions should be followed. Do not use this equipment near water. Care should be taken so that objects do not fall and liquids are not spilled into the unit through any openings. The power cord should be unplugged from the outlet when left unused for a long period of time.
DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT. THIS EQUIPMENT SHOULD BE SERVICED BY QUALIFIED PERSON­NEL ONLY. DO NOT MAKE ANY INTERNAL ADJUSTMENTS OR ADDITIONS TO THIS EQUIPMENT AT ANY TIME. DO NOT TAMPER WITH INTERNAL ELECTRONIC COMPONENTS AT ANY TIME. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY VOID THE WARRANTY OF THIS EQUIPMENT, AS WELL AS CAUSING SHOCK HAZARD.
POWER REQUIREMENTS
This unit accepts power from the 9V AC/1.5A adaptor supplied with the unit. This 9 volt RMS AC voltage is internally processed by a voltage doubler which generates a bipolar ±15 volts to maintain the headroom and sound quality of professional, studio quality equipment. Using an external power source such as this minimizes excessive noise and hum problems often associated with internal transformers, providing optimal performance for the user.
OPERATING TEMPERATURE
Do not expose this unit to excessive heat. This unit is designed to oper­ate between 32° F and 104° F (0° C and 40° C). This unit may not function properly under extreme temperatures.
Loading...
+ 8 hidden pages