Roberts Radio CR9951 User Manual

CR9951

3 Band Single Alarm

Clock Radio

Sound for Generations

Please read this manual before use

Controls

(Top)

3

4

2

1

12 1 1 10 9 8 7

(Left side) (Right side)

5

6

1. Dimmer switch

2. Function switch

3. Headphone socket

4. Volume control

1

5. Waveband selector

6. Tuning control

7. Snooze button

8. Sleep button

9. AL. Set/off button

10. Time button
1 1. Minute button

12. Hour button

Controls

(Front)

13

17

13. PM indicator

14. LED dial pointer

15. Battery compartment (underside)

If you need any further advice, please call our Technical Helpline on :­020 8758 0338 (Mon-Fri)

16

14

15

16. Rating plate (underside)

17. Alarm indicator

2

Switching on and setting the time

Before using your clock radio you must first set the correct time.

1. Check that the supply voltage agrees with the voltage indicated
on the rating plate on the bottom of the product. Place the unit on a
flat surface. Plug the power cord into the wall socket and switch
on.

2. The clock display will flash 12:00.

3. Press and hold down the Time Set button.

4. Whilst holding down the Time Set button press the Hour, or
Minute buttons to set the time. Release the buttons when the
correct time is reached. The clock uses a 12 hour display with a
PM indicator. Ensure that the correct 12 hour cycle is selected.

3