Roberts Radio CR9945 User Manual
Sound for Generations
ROBERTS
CR9945
2 Band Auto Set Dual Alarm
Clock Radio
Please read this manual before use
Controls (top)
shown with Snooze cover
open
1. Alarm 2 switch.
2. Alarm 1 switch.
3. Alarm 1 button.
4. Time zone button.
5. Down button.
6. Alarm mode button.
7. Year button.
8. Date button.
9. Up button.
10. Time button
11. Alarm 2 button
12. Waveband switch.
1
1
2
4
6
3
5
7
10
8
9
11
12
Controls (front)
13. Alarm indicator.
14. Tuning scale.
15. Day of week indicators.
16. Time/Date display.
17. Low battery indicator.
18. Tuning scale
19. Sleep button
20. On/off button.
13
14
15 17
1816
20 19
If you need any further advice, please call our Technical Helpline on :020 8758 0338 (Mon-Fri)
2
Controls (left and right side)
21. Dimmer switch.
22. Volume control.
21
3
23. Tuning control.
22
23
Switching on
1. Place your clock radio on a flat surface. Plug the power cord into the wall
socket and switch on.
2. After a few seconds the time, day and date will set automatically.
Your clock radio is fitted with a long life back-up battery to maintain
the factory set time, day and date. Your clock radio will automatically
adjust for summer/winter time.
See section on Backup battery on pages 12 and 13.
Should the time require adjustment follow the procedure shown in the
next section.
Setting the time
1. Press and hold down the Time button.
2. Whilst holding down the Time Set button press the Up or Down buttons
to set the time. Release the buttons when the correct time is reached.
The clock uses a 12 hour display with an AM indicator. Ensure that the
correct 12 hour cycle is selected.
If you need any further advice, please call our Technical Helpline on :020 8758 0338 (Mon-Fri)
4
1. To set year hold down both Year and Date buttons. The display
will change to show year
2. Whilst holding down Year and Date buttons set correct year
using Up or Down buttons. When the Year and Date buttons are
released the display will revert to showing Day/Date
1. To set date hold down the Date button.
2. Whilst holding down the Date button set correct date using Up or
Down buttons.
5
Loading...