Roberts Radio CR9932 User Manual
CR9932
3 Band Single Alarm
Night Light Clock Radio
ROBERTS
Sound for Generations
Please read this manual before use
Controls
(Top)
2
1
(Left side) (Right side)
1. Dimmer switch
2. Function switch
3. Headphone socket
4. Volume control
12 11 10 9 8 7
5. Waveband selector
6. Tuning control
7. Snooze/night light button
8. Sleep button
3
4
5
6
9. Alarm/Off button
10. Time button
1 1. Minute button
12. Hour button
1
Controls
(Front)
13
16
13. PM indicator
14. LED dial pointer
15. Battery compartment (underside)
16. Alarm indicator
If you need any further advice, please call our Technical Helpline on :020 8758 0338 (Mon-Fri)
15
14
2
Switching on and setting the time
Before using your clock radio you must first set the correct time.
1. Place the unit on a flat surface. Plug the power cord into the wall
socket and switch on.
2. The clock display will flash 12:00.
3. Press and hold down the Time Set button.
4. Whilst holding down the Time Set button press the Hour, or
Minute buttons to set the time. Release the buttons when the
correct time is reached. The clock uses a 12 hour display with a
PM indicator. Ensure that the correct 12 hour cycle is selected.
3
Loading...