Rinnai AVENGER 25Plus, CAPELLA 18Plus Customer Operation & Installation Manual

AVENGER 25Plus
CAPELLA 18Plus
Unflued Room Heater
Customer Operation & Installation Manual
This appliance shall be installed in accordance with:
Manufacturer’s Installation Instructions Local Gas Fitting Regulations Municipal Building Codes AG601/AS5601-2000 Gas Installations, AS/NZS 3000 Wiring Rules Any other relevant Statutory Regulation This appliance must be installed, serviced and removed by an Authorised Person
Proudly a member of the AGA
A
ll of our gas products are AG
A
tested and approved.
Rinnai Australia i RCE-470/670 TRE
As a purchaser of a high quality Rinnai product, we provide you with the following guarantee on your new Portable Convector Space Heater.
* Combustion chamber full replacement parts costs in the first 5 years, reducing 20% per year thereafter.
The benefits conferred by this guarantee are in addition to all other rights and remedies in respect of the product which you have under the Trade Practices Act and other State and Territory Laws.
The appliance must be installed correctly, and the installation must conform to all local regulations.
The installation must also comply with the instructions supplied by Rinnai.
The appliance must be serviced by an authorised person.
No Parts or functions should be modified or permanently removed from the heater.
Please note: General cleaning, maintenance and wear and tear are not necessarily covered by guarantee. Calls of this nature may be chargeable.
Your Rinnai Portable Space Heater has been approved by the Australian Gas Association, the AGA Approval Number is located on the data plate of the appliance.
Please keep these instructions in a safe place for future reference.
PLEASE RECORD BELOW:
Free Labour Period Free Parts Period
FANS
5 Years 5 Years
COMBUSTION CHAMBER
5 Years 10 Years Pro-Rata*
ALL Other parts
5 Years 5 Years
Your Retailer:
NAME:
ADDRESS:
TELEPHONE:
Date of Purchase:
/ /
RINNAI GUARANTEE OF QUALITY
Rinnai Australia ii RCE-470/670 TRE
RINNAI GUARANTEE OF QUALITY ...........................................................................i
ABOUT YOUR NEW AVENGER/CAPELLA Plus ......................................................1
CONTROL PANEL LAYOUT ......................................................................................2
REMOTE CONTROL ...................................................................................................3
FEATURES..................................................................................................................4
IMPORTANT POINTS .................................................................................................5
CUSTOMER OPERATING INSTRUCTIONS ....................................................10
HOW TO OPERATE THE HEATER ..................................................................11
ADJUSTING TEMPERATURES........................................................................12
HEATER MODES & FUNCTIONS.....................................................................13
SETTING HEATER MODES .............................................................................14
SETTING CLOCK..............................................................................................15
PROGRAMMING THE ON/OFF TIMERS .........................................................16
OPERATING THE ON/OFF TIMERS ................................................................17
PRE-HEAT.........................................................................................................17
OVERRIDE FUNCTION ....................................................................................18
USING THE REMOTE CONTROL ....................................................................18
CHILD LOCK .....................................................................................................19
SAFETY DEVICES ....................................................................................................19
CARE OF HEATER ...................................................................................................20
FAULT FINDING........................................................................................................21
ERROR CODES ........................................................................................................22
SPECIFICATIONS .....................................................................................................23
CUSTOMER CONTACTS..........................................................................................25
TABLE OF CONTENTS
Rinnai Australia 1 RCE-470/670 TRE
STANDBY/ON BUTTON
ABOUT YOUR NEW AVENGER/CAPELLA Plus
Rinnai Australia 2 RCE-470/670 TRE
STANDBY/ON
STANDBY / ON button
CONTROL PANEL LAYOUT
Rinnai Australia 3 RCE-470/670 TRE
STANDBY BUTTON
Timer mode. STANDBY button will cancel any future timer
operations, these will have to be reset manually.
REMOTE CONTROL
Rinnai Australia 4 RCE-470/670 TRE
PUSH BUTTON IGNITION Only one touch of the STANDBY/ON switch is required
to operate the heater.
CHILD LOCK When the Child Lock is activated all controls other than
the STANDBY switch will be locked. Deactivating the lock releases the controls. If the lock is activated when the appliance is in STANDBY, all functions will be locked.
MEMORY The micro-computer records selected preset
temperatures, the times programmed into Timers as well as operating the Economy/Auto-Off and Pre-heat modes, to maintain comfort levels.
PRE-HEAT This function will automatically operate the appliance
before the programmed start time of the Timer, in order to heat a room to the pre-set temperature by the programmed time.
FILTER INDICATOR When the fan filters become covered with dust, the filter
indicator will flash. The filters should be vacuumed at regular intervals to avoid unnecessary strain on the appliance.
REMOTE CONTROL For the convenience of operating the heater between
STANDBY or ON, as well as adjusting the temperature up or down while at a short distance from the heater.
DUAL WEEKDAY / WEEKEND TIMER
The Dual WEEKDAY/WEEKEND Timer allows you to program the appliance to come on for two separate periods each day, one period in the morning and one period in the evening, on separate WEEKDAY and WEEKEND timers. The built in Pre-heat Mode brings the room temperature to the temperature you have selected, by the time programmed into the Timer.
The Dual Timer feature means that you can "Set and Forget" your heater. It will turn itself ON or to STANDBY at the times you have programmed until you cancel the Timer program.
ECONOMY / AUTO-OFF FUNCTION
The Economy / Auto-Off functions are energy saving feature designed to control the room temperature and are automatically selected in all modes.
FEATURES
Rinnai Australia 5 RCE-470/670 TRE
The above diagram shows the clearances required
around this heater whilst in operation.
Unpacking Appliance:
Check for damage. If the heater is damaged, contact your supplier for advice. Before installing the appliance, check it is labelled for the correct gas type (see label on rear of heater). Refer to local gas authority for confirmation of gas type if you are in doubt. The following items should also be included in the carton: Customers Operation Information, Remote Control, Remote Control Caddy and Batteries.
IMPORTANT
1. The appliance must be installed in accordance with the local gas and electrical authority regulations.
2. For information on gas consuption, see data plate on the appliance.
3. When using this appliance, ensure that the room is correctly ventilated. Check AG601/AS5601 (Gas Installations) or the local gas authority for information on ventilation requirements, or refer to the warning label located on the appliance.
4. DO NOT connect this appliance to the gas supply to heat a bedroom. It may be connected to the electric supply for heating a bedroom in ‘ELECTRIC’ mode only.
5. DO NOT use this heater in the immediate surroundings of a bath, shower, swimming pool, toilet or sauna. The appliance must not be used to heat any of these areas.
6. DO NOT connect to an LPG Gas cyclinder indoors.
7. This appliance must not be installed where curtains or other combustible materials could come into contact with it. In some cases curtains may need restraining.
8. This appliance is not designed to be built in.
9. Heater must not be located below a power socket-outlet.
10. If you move house, check the gas type in the area where you are moving to.
11. The local gas and electrical authorities will be able to advise on local regulations.
12. Heat emanating from the front of this appliance may over time affect the appearance of some materials used for flooring such as carpet, vinyl, cork or timber. This effect may be amplified if the air in the room contains cooking vapours or cigarette smoke. To avoid this possibility, it is recommended that a mat be placed in front of the appliance, extending at least 750 mm in front of it.
13. The apliance is not intended for use by young children or infirm persons without supervision.
14. Young children should be supervised to ensure they do not play with the appliance.
15. If the supply cord or gas hose are damaged or require replacing, they must be replaced by the manufacturer or the manufacturer's agent or similarly qualified person in order to avoid a hazard.
16. The appliance weighs 21 kg. Exercise caution when lifting or moving.
IMPORTANT POINTS
Rinnai Australia 6 RCE-470/670 TRE
Do not allow children to post articles in the louvres.
The appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure they DO NOT play with the appliance.
Do not allow children or elderly persons to sleep in the warm air discharge from the heater.
Do not cover or place articles on this heater.
IMPORTANT POINTS
Loading...
+ 19 hidden pages