RIDGID 32803, 32808, 32813, 32818 User Manual

Page 1 of 9

Section 1

– Product & Company Identification

Section 2

– Hazards

Identification

Section 3

– Composition

/ Information On Ingredients

SAFETY DATA SHEET

Product Name ........................ : RIDGID Endura-Clear Thread Cutting Oil

Product Catalog No. ............... : 32803, 32808, 32813, 32818

Recommended Use................ : Thread Cutting

Restrictions on Use…………..: Use in the manufacturing process only

Company Name ..................... : Ridge Tool Company

Address .................................. : 400 Clark Street

: Elyria, Ohio 44035-6001

Telephone .............................. : 1-800-519-3456 (USA) (8:00 am – 5:00 pm EST, M-F)

Emergency Telephone ........... : call 9-1-1 or local emergency number

Website ………………………..: www.RIDGID.com

Issue Date .............................. : June 23, 2015

This product is classified as not hazardous per US OSHA 29CFR 1910.1200 (HazCom

2012) and Canada’s Hazardous Products Regulations (WHMIS 2015).
GHS Label Elements: Not applicable

Component: CAS # % By Weight
Mineral Oil Confidential 60-100%
Zinc Compound Confidential 1-5%

This product does not contain silicone or chlorinated additives.

Specific chemical identities and/or exact percentages have been withheld as trade secrets.

Page 2 of 9

Section 4

– First Aid Measures

Section 5

– Fire Fighting Measures

Product Name ........................ : RIDGID Endura-Clear Thread Cutting Oil

INGESTION:

Rinse mouth thoroughly. Call a Poison Center or doctor if you feel unwell. Do
NOT induce vomiting.

INHALATION:

Move to fresh air. Call a Poison Center or doctor if you feel unwell.

SKIN CONTACT:

Remove contaminated/saturated clothing and shoes. Wash contact areas with
soap and water. If skin irritation occurs: Get medical advice/attention.

EYE CONTACT:

Flush thoroughly with water. If irritation occurs, get medical assistance. Continue
to rinse for at least 15 minutes.

MOST IMPORTANT SYMPTOMS/EFFECTS, ACUTE AND DELAYED

Symptoms:

No data available.

INDICATION OF IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
NEEDED

Treatment:

Get medical attention as appropriate or if symptoms persist

GENERAL FIRE HAZARDS:

No unusual fire or explosion hazards noted.

SUITABLE (AND UNSUITABLE) EXTINGUISHING MEDIA

Suitable extinguishing media:
Unsuitable extinguishing media:

SPECIFIC HAZARDS ARISING FROM THE CHEMICAL:

Heat may cause the containers to pressurize and possibly rupture. During fire,
gases hazardous to health may be formed.

No data available.
Do not use water jet as an extinguisher, as this will spread the fire.

Page 3 of 9

Section 6

– Accidental Release Measures

Section 7

– Handling And Storage

Product Name ........................ : RIDGID Endura-Clear Thread Cutting Oil

SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIREFIGHTERS

Special firefighting procedures:

No data available.

Special protective equipment for fire-fighters:

Firefighters must use standard protective equipment appropriate for
Industrial fires.

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY
PROCEDURES:

See Section 8 of the SDS for Personal Protective Equipment. Do not handle
damaged containers or spilled material unless wearing appropriate protective
clothing. Keep unauthorized personnel away. Ensure adequate ventilation.

METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:

Absorb with sand or other inert absorbent. Stop the flow of material, if this is
without risk.

ENVIRONMENTAL PRECAUTIONS:

Avoid release to the environment. Do not contaminate water sources or sewer.
Prevent further leakage or spillage if safe to do so and protect against releases
into the environment. Remediate as appropriate.

PRECAUTIONS FOR SAFE HANDLING:

Observe good industrial hygiene practices. Wear appropriate personal protective
equipment. Do not expose to intense heat as product may expand and
pressurize container.

CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:

Store in original tightly closed container. Avoid contact with oxidizing agents.
Store away from incompatible materials.

SHELF LIFE:
720 days