Ricoh WLCMN01 User Manual

Contains label

When a module is included in the end products and disappears from the outside at the time
of shipment, a Contains label is stuck on the end products.

A Contains label is the following contents.

Contains FCC ID: BBP-WLCMN01 Contain IC: 144D-WLCMN01

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

About User manual

User manual and Installation manual will be supplied with this module.

(Note)
This module was granted as FCC/IC Limit ed Modular Approval. Host system s mu st prov id e regulated
supply voltages to the module. Separate evaluation mus t be requi r ed for any por tabl e con figur a tion.
When used in mobile applications, the antennas shown i n this filing must be installed to provide a
separation distance of at least 20 cm from all persons.
OEM integrators and end-users must be provided with specific information required to satisfy RF
exposure compliance for the final host device.
OEM integrators are instructed to ensure that the end user has no manual inst ructions to remove or
install the device. The antenna of this device must not be co-located or used in conjunction with any
other antenna or tr ansmitter. OEM integrators must be provided with antenna installation i nstructions.
Only those antennas tested with the device or similar antennas with equal or lesser gain may be used
with this transmitter.

This device compli es with the Dy nami c Freq uency S electi on (DFS) r equir eme nts of R epo rt and Or der FCC
03-287 as a Client only without Radar Detection.