Ricoh WLALT01 User Manual

User’s manual

Product: Wireless LAN Module
Model: LBWB1ZZWU6
FCC ID: BBP-WLALT01
IC: 144D-WLALT01

For OEM integration only – device cannot be sold to general public.
Therefore we will not supply the User’s manual, the installation manual is the official for OEM.

(Note)

This module was granted as FCC/IC Limited Modular Approval. Additional host systems must be required reassessment of Dynamic Frequency Selection
and host systems must provide regulated supply voltages to the module. Separate evaluation must be req uired for any portable configuration. When used
in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. OEM
integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM
integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be
co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only
those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 0 3-287 as a Client only without Radar Detection.

We will ask OEM to include the following Notices required by FCC/ IC on the product and in the User’s manual.

■Requirement of Labeling

(For FCC)

Please describe the following item on the host device of the this module:

Contains Transmitter Module FCC ID: BBP-WLALT01 or Contains FCC ID: BBP-WLALT01

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

(For IC)

Please describe the following item on the host device of the this module:

Contains Transmitter Module IC: 144D-WLALT01 or Contains IC: 144D-WLALT01