Ricoh WG-70 Quick Start Guide
Digital Camera
Start Guide
To ensure the best performance from your camera, please read this
manual before using the camera.
Model:R03040
57
Information for Users on Collection and Disposal of Old Equipment
and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or
accompanying documents mean that used electrical and
electronic equipment and batteries should not be mixed with
general household waste.
Used electrical/electronic equipment and batteries must be
treated separately and in accordance with legislation that
requires proper treatment, recovery and recycling of these
products.
By disposing of these products correctly you will help ensure
that the waste undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on
the environment and human health which could otherwise
arise due to inappropriate waste handling.
If a chemical symbol is added beneath the symbol shown
above, inaccordance with the Battery Directive, this indicates
that a heavy metal(Hg = Mercury, Cd = Cadmium, Pb = Lead)
is present in the battery at aconcentration above an
applicable threshold specified in the BatteryDirective.
For more information about collection and recycling of used products,
please contact your local authorities, your waste disposal service or the
point of sale where you purchased the products.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard used
products, please contact your local authorities or dealer and ask for the correct
method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of
charge to the dealer, even when you dont purchase a new product. Further
collection facilities are listed on the home page of www.swico.ch
or www.sens.ch.
An Operating Manual (PDF) containing information on how touse
this camera is available. Please download it from our website.
Operating Manual Download:
http://www.ricoh-imaging.com/manuals/
In order to better serve you, we request that you complete the user registration,
which can be found on our website. Thank you for your cooperation.
http://www.ricoh-imaging.com/registration/
Information on the Operating Manual
Regarding User Registration
Thank you for purchasing this RICOH WG-70 Digital Camera.
This Start Guide provides information on how to get your RICOH WG-70 ready
for use and its basic operations. To ensure proper operation, please read this
Start Guide before using the camera.
For details on how to use the various shooting methods and settings, please refer
to the Operating Manual (PDF) posted on our website.
Refer to p.59 for details on the Operating Manual.
Regarding copyrights
Images taken with this digital camera that are for anything other than personal
enjoyment cannot be used without permission according to the rights as specified in
the Copyright Act. Please take care, as there are cases where limitations are placed on
taking pictures even for personal enjoyment during demonstrations, performances or
of items on display. Images taken with the purpose of obtaining copyrights also cannot
be used outside the scope of use of the copyright as laid out in the Copyright Act, and
care should be taken here also.
Regarding trademarks
• SDXC logo is a trademark of SD-3C, LLC.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing, LLC in the United States and/or
other countries.
• This product supports PRINT Image Matching III. PRINT Image Matching
enabled digital still cameras, printers and software help photographers to
produce images more faithful to their intentions. Some functions are not
available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
• This product is licensed under the AVC Patent Portfolio License for the personal
use of a consumer or other uses in which it does not receive remuneration to (i)
encode video in compliance with the AVC standard (“AVC video”) and/or (ii)
decode AVC video that was encoded by a consumer engaged in a personal
activity and/or was obtained from a video provider licensed to provide AVC
video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
• All other trademarks are the property of their respective owners.
To users of this camera
• Do not use or store this camera in the vicinity of equipment that generates strong electromagnetic radiation
or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such as radio transmitters could
interfere with the display, damage the stored data, or affect the camera’s internal circuitry and cause
camera misoperation.
•
The liquid cr ystal pane l used for the display is manufactured using extremel y high prec ision techn ology.
Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels
may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.
• There is a possibility that the illu strations and the screen display in this manual are different from the actual
ones.
• In this manual, SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards are referred to as SD
Memory Cards.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or a Macintosh.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and its
accessories.
In this manual, the capture mode, such as for taking still pictures and recording
movies, is referred to as “A mode” (capture mode) (“Still Picture Capture Mode”
refers to the mode for taking still pictures and “Movie Mode” refers to the mode
for recording movies). The playback mode, such as for viewing captured images
on the display, is referred to as “Q mode” (playback mode). In Q mode, you
can perform simple editing operations on the images that are played back.
The meanings of the symbols used in this manual are explained below.
Indicates the reference page number for an explanation of the related
1
operation.
Indicates information that is useful to know.
Indicates precautions to be taken when operating the camera.
Using Your Camera Safely
We have paid close attention to the safety of this camera. When using this camera, we
request your special attention regarding items marked with the following symbols.
Warning
This symbol indicates that ignoring this item could cause serious
personal injuries.
Caution
This symbol indicates that ignoring this item could cause minor or
medium personal injuries, or loss of property.
1
About the Camera
Warning
• Do not attempt to take the camera apart or modify the camera. High voltages are present within
the camera, and there is a danger of electric shock if the camera is taken apart.
• If the inside of the camera should become exposed as a result of, for example, the camera being
dropped, please do not under any circumstances touch such exposed portions, as there is a
danger of receiving an electric shock.
• Wrapping the strap around a neck is dangerous. Take care that small children do not hang the
strap around their necks.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately,
remove the battery, and contact your nearest service center. Continued use can cause a fire or
electric shock.
Caution
• Do not place your finger on the flash when it is discharging as there is a risk of burns.
• Do not discharge the flash while it is touching your clothing as there is a risk of discoloring.
• Some portions of the camera heat up during use, so please take care, as there is a risk of low
temperature burns if such portions are held for long periods of time.
• Should the display be damaged, be careful of glass fragments. Also, be careful not to allow the
liquid crystal to get on your skin, in your eyes, or in your mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause
itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical
attention immediately.
About the Power Adapter
Warning
• Always use the power adapter exclusively developed for this camera, with the specified power and
voltage. Using a power adapter not exclusive to this camera, or using the exclusive power adapter
with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The
specified voltage is 100-240V AC.
• Do not disassemble or modify the product. This can cause a fire or electric shock.
• If the generation of smoke or strange odor from the product or other abnormality occurs,
immediately discontinue its use and consult your nearest service center. Continued use can cause
a fire or electric shock.
• If water should happen to get inside the product, consult your nearest service center. Continued
use can cause a fire or electric shock.
• If you see a lightning flash or hear thunder during use of the power adapter, unplug the AC plug
and discontinue use. Continued use can cause damage to the product, fire, or electric shock.
• Wipe off the AC plug if it becomes covered with dust. Accumulated dust may cause a fire.
2
Caution
• Do not place or drop heavy objects on or forcefully bend the USB cable. Doing so may damage
the cable. Should the cable be damaged, consult your nearest service center.
• Do not touch or short-circuit the terminal area of the USB cable while the cable is plugged in.
• Do not handle the AC plug with wet hands. This can cause an electric shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause
a malfunction.
• Do not use the power adapter to charge a battery other than a rechargeable lithium-ion battery DLI92. This can cause overheating, explosion, or connected device failure.
•
To reduce the risk of hazards, use only a CSA/UL certified power supply cord set, cord is Type SPT-2
or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a
specified NEMA configuration), and the other is provided with a molded-on female connector body (with
a specifie d IEC nonind ustrial type configuration) o r the equi valent.
About the Battery
Warning
• Be sure to store the battery out of the reach of small children. Placing it in their mouths may cause
an electric shock.
• If any leakage from the battery should come in contact with your eyes, it may cause a loss of sight.
Flush your eyes with clean water and get medical attention immediately. Do not rub them.
Caution
• Only use the specified battery with this camera. Use of other batteries may cause an explosion or
fire.
• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful
not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.
•
If any leakage from the battery should come in contact with skin or clothes, it may cause irritation to the
skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI92 Battery Usage:
BATTERY MAY EXPLODE OR FIRE IF MISTREATED.
- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.
- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.
- DO NOT HEAT ABOVE 140°F / 60°C, OR SHORT CIRCUIT.
- DO NOT CRUSH OR MODIFY.
Keep the Camera and its Accessories out of the Reach of Small
Children
Warning
• Be sure to keep the camera and its accessories out of the reach of small children.
1. Injuries may result from the product falling or from unexpected movement.
2. Suffocation may result from wrapping the strap around the neck.
3. Small accessories such as battery or an SD Memory Card may be swallowed. Seek medical
attention immediately if an accessory is accidentally swallowed.
3
Care to be Taken During Handling
Before Using Your Camera
• When the c amera has not been used for a long time , confirm that it is still working properl y, particularly
prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording
cannot be guaranteed if recording, playback or transferring your data to a compu ter, etc. is not
possible due to a malfunction of your camera or recording media (SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
About the Battery and Power Adapter
• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high
temperatures.
• If the battery is left inserted and the camera is not used for a long time, the battery will overdischarge and shorten the battery’s life.
Charging the battery a day before use or on the day of use is recommended.
•
•
Class II equipment: The provided power adapter is a Class II (double-insulated) product.
Precautions on Carrying and Using Your Camera
•
Hot and humid places should be avoided. Particular care should be taken re garding vehicles, which
can become very hot inside.
• Ensure that the camera is not subjected to substantial vibrations, shocks, or pressure as this may
cause damage, malfunction, or a loss in waterproof performance. Place the camera on a cushion
for protection when the camera is subjected to the vibrations of a motorbike, car, ship, etc. If the
camera is subjected to substantial vibrations, shocks, or pressure, take your camera to your
nearest service center and have it checked.
• The temperature range in which the camera can be used is -10°C to 40°C (14°F to 104°F).
• The display will become black at high temperatures but will return to normal at normal
temperatures.
• The response speed of the display becomes slow at low temperatures. This is due to the
properties of the liquid crystal and is not a malfunction.
• If the camera is subjected to rapid temperature changes, condensation may form on the inside and
outside of the camera. Therefore put the camera in a bag or plastic bag and take it out when the
difference in temperature has subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt. These could cause the
camera to breakdown. Wipe the camera to dry off any rain or water drops.
• Do not press the display with excessive force. This could cause it to break or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may damage the exterior of
the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket
on the camera.
Cleaning Your Camera
• Do not clean the camera with organic solvents such as thinner, alcohol or benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning
as it may damage the lens.
4
Storing Your Camera
Write-protect
switch
• Avoid storing the camera where pesticides and chemicals are handled. Remove the camera from
its case and store it in a well-ventilated place to prevent the camera from becoming moldy during
storage.
• Avoid using or storing the camera where it may be exposed to static electricity or electrical
interference.
• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid
changes in temperature or to condensation.
• Periodic inspections are recommended every one to two years to maintain high performance.
Other Precautions
• The SD Memory Card is equipped with a writeprotect switch. Setting the switch to LOCK prevents
new data from being recorded on the card, the
stored data from being deleted, and the card from
being formatted by the camera or computer.
r appears on the display when the card is writeprotected.
• Care should be taken when removing the SD
Memory Card immediately after using the camera,
as the card may be hot.
• Keep the battery/card cover closed and do not remove the SD Memory Card or turn the
camera off while the data is being played back or saved to the card, or the camera is
connected to a computer with the USB cable, as this may cause the data to be lost or the
card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water
and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage the card and
render it unusable.
• The data on the SD Memory Card may be lost in the following circumstances. We do not
accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical interference.
(3) when the SD Memory Card has not been used for a long time.
(4) when the SD Memory Card is ejected or the batteries are removed while the card is
being accessed.
• If it is not used for a long time, the data on the card may become unreadable. Be sure to
regularly make a backup of important data on a computer.
• Be sure to format SD Memory Cards that are unused or have been used on another
camera.
• When using an SD Memory Card with a slow recording speed, recording may stop while
recording a movie even if there is adequate space in the memory, or image capture or
playback may take a long time.
• Please note that deleting data, or formatting the SD Memory Cards or the built-in memory
does not completely erase the original data. Deleted files can sometimes be recovered
using commercially available software. It is user’s responsibility to ensure the privacy of
such data.
5
Contents
Using Your Camera Safely.................................................................................... 1
Care to be Taken During Handling........................................................................ 4
Contents ................................................................................................................ 6
Checking the Contents of the Package ................................................................... 7
Names of Parts........................................................................................................... 8
Names of Operating Parts ......................................................................................... 9
Display Indications .................................................................................................. 12
Display in A Mode ............................................................................................. 12
Display in Q Mode ............................................................................................ 13
Guide Display ...................................................................................................... 14
Powering the Camera .............................................................................................. 15
Installing the Battery ........................................................................................... 15
Charging the Battery ........................................................................................... 17
Installing an SD Memory Card ................................................................................ 19
Turning the Camera On and Off ............................................................................. 21
Starting-up in Playback Mode ............................................................................. 21
Initial Settings .......................................................................................................... 22
Setting the Display Language.............................................................................22
Setting the Date and Time .................................................................................. 23
Setting the Camera Functions ................................................................................ 24
Operating the Menus .......................................................................................... 24
Menu List ............................................................................................................ 26
Resetting to Default Settings (Reset).................................................................. 29
Displaying the Clock Display ............................................................................... 29
Taking Still Pictures................................................................................................. 30
Taking Pictures ................................................................................................... 30
Using the Zoom................................................................................................... 32
Setting the Shooting Mode.................................................................................. 33
Using the Self-timer............................................................................................. 36
Setting the Shooting Functions.............................................................................. 38
Using the Rec. Mode Menu Items....................................................................... 38
Selecting the Flash Mode ................................................................................... 39
Selecting the Focus Mode .................................................................................. 40
Recording Movies .................................................................................................... 43
Recording Movies ............................................................................................... 43
Recording a Movie Quickly Using the Movie Button ........................................... 44
Playing Back Images ............................................................................................... 45
Playing Back Still Pictures................................................................................... 45
Playing Back a Movie.......................................................................................... 45
Using the Playback Functions............................................................................. 46
Deleting Images ....................................................................................................... 49
Deleting a Single Image ...................................................................................... 49
Appendix................................................................................................................... 50
Main Specifications ............................................................................................. 50
Warranty Policy ................................................................................................... 55
Information on the Operating Manual.................................................................. 59
Regarding User Registration ............................................................................... 59
6
Checking the Contents of the Package
Camera
RICOH WG-70
Rechargeable lithium-ion
battery D-LI92 (*)
Start Guide (this manual)
Regarding Waterproof,
Dustproof, and Shockproof
Design
* Available as optional accessories.
Power adapter D-PA164 Macro stand
Strap
O-ST104 (*)
USB cable
I-USB157 (*)
O-MS1
7
Names of Parts
Shutter
release button
Lens
Power button/Power lamp (green)
Flash
Microphone
Self timer lamp/
Focus assist light
Remote control receiver
LED Macro Lights
Speaker
Display
Tripod socket
Battery/card cover
USB terminal
Battery lock lever
Terminal cover
lock lever
HDMI terminal
Terminal cover
Battery/card cover
lock lever
Remote control
receiver
Front
Back
8
Names of Operating Parts
2
4
8
6
9
5
3
1
7
1 Power button
Turns the camera on and off (p.21).
2 Shutter release button
A Mode:
Focuses the camera on the subject when pressed halfway in Still Picture
Capture Mode (except when the focus mode is set to 3, s, and \) (p.30).
Takes a still picture when pressed down fully (p.31).
Pressing down fully starts and stops movie recording in C (Movie),
(Underwater Movie), and (High Speed Movie) modes (p.43).
Q Mode:
Switches to A mode.
3 W/T button
A Mode:
Changes the captured area (p.32).
Q Mode:
In single-image display, pressing f switches to 6-image display. Pressing f
again switches to 12-image display. Press y to return to the previous display.
In single-image display, pressing y magnifies the image. Press f to return to
the previous display.
In 12-image display, press f to change to folder or calendar display.
In folder/calendar display, press y to change to 12-image display.
Adjusts the volume during playback of movies (p.45).
9
4 Q button
A Mode:
Switches to Q mode.
Q Mode:
Switches to A mode.
5 Four-way controller
A Mode:
(2) : Changes the drive mode (p.36).
(3) : Displays the Capture Mode Palette (p.34).
(4) : Changes the flash mode (p.39).
(5) : Changes the focus mode (p.40).
(23) : Adjusts the focus when the focus mode is set to \ (p.41).
Q Mode:
(2) : Plays back and pauses a movie (p.45).
(3) : Displays the Playback Mode Palette (p.48).
(45) : Displays the previous or next image during single-image display
(2345) : Changes the position of the area to be magnified during zoom
Stops a movie during playback (p.45).
(p.45).
Fast-forwards, fast-reverses, frame forwards, and frame
reverses during movie playback (p.45).
display.
Selects an image in 6- or 12-image display, a folder in folder display,
and a date in calendar display.
Adjusts the position of a frame or an image when you are using
the Original Frame function.
6 4 button
A Mode:
Changes the information on the display (p.12).
Q Mode:
Changes the information on the display (p.13).
Returns zoom, 6- or 12-image display to single-image display.
Changes to 12-image display of the selected folder during folder display.
Changes to single-image display of the selected date during calendar display.
7 3 button
A Mode:
In Still Picture Capture Mode, [A Rec. Mode] menu appears. In Movie Mode,
[C Movie] menu appears (p.24).
Q Mode:
Displays the [W Setting] menu during single-image display (p.24).
Returns to single-image display during Playback Mode Palette display (p.47).
Returns zoom, 6- or 12-image display to single-image display.
10
Switches from folder/calendar display to 12-image display with the cursor
5
or
2 or
3
or
or
4
3
5
2
4
4
2
5
3
placed on the most recent image.
8 Movie button
A Mode:
Starts movie recording in Still Picture Capture Mode (p.44).
9 Green/i button
A Mode:
Switches to 9 (Green) mode.
Calls up the assigned function.
Q Mode:
Switches from single-image display to the Delete screen (p.49).
Switches from 6- or 12-image display to the Select & Delete screen.
Switches from folder display to the calendar display screen.
Switches from calendar display to the folder display screen.
In this manual, the method for operating the four-way controller is shown in illustrations,
such as in the ones below.
Macro stand
Attaching the supplied macro stand (O-MS1) reduces camera shake during shooting
in (Digital Microscope) mode. Insert two clips into the slits in upper and lower sides
of the LED Macro Lights part. When attaching and detaching the macro stand, do not
hold the clip part.
* When using the macro stand, the camera may not be able to focus if the objects
have uneven surfaces.
11
Display Indications
1 4 : 2 5
ISO
200
AWB
12
M
3 8
+ 1 . 0
1 / 2 5 0
F 3 . 5
0 2 / 0 2 / 2 0 2 0
Display in A Mode
The display changes in the following sequence each time you press the 4
button: “Normal Display”, “Histogram + Info”, “Grid Display”, “No Info”, “LCD Off”.
Normal Display/ Histogram + Info/ Grid Display in Still Picture Capture Mode
1 to 17 and A1 appear when “Normal Display” is selected. B1 to B6 appear at the
position of 15 when “Histogram + Info” is selected. Only A1 appears when “Grid
Display” or “No Info” is selected.
11 12 13
1
P
2
3
DATE
4
+1.0
+1.
5
6
1/25
1/250
7
F3.
F3.5
8
9
10
38
16 17 B1 B2 B3 B4
14
A1
B5
12
12
M
AWB
IS
ISO
20
200
B6
Shooting mode (p.33)
1
Battery level indicator (p.18)
2
Face Detection icon
3
Date Imprint setting
4
EV Compensation
5
Shutter speed
6
Aperture
7
Pixel Track SR icon
8
Memory status (p.21)
9
Remaining image storage capacity
12
10
11
12
13
Flash Mode (p.39)
Drive Mode (p.36)
Focus Mode (p.40)
02/02/2020
02/02/2020
Digital zoom/Intelligent Zoom
14
14:2
14:25
15
icon (p.32)
Date and time (p.23)
15
World Time setting
16
D-Range Setting
17
Focus frame (p.30)
A1
Recorded Pixels
B1
Quality Level
B2
White Balance
B3
AE Metering
B4
Histogram
B5
Sensitivity
B6
* 6 and 7 are only displayed when the shutter release button is pressed half-way.
1 0 0
-
0 0 3 8
F 3 . 5
1 / 2 5 0
ISO
200
AWBWB
12
M
Edit
* For 8, M is displayed when Pixel Track SR is set to O (On) on the [A Rec.
Mode] menu. f is displayed when the shutter release button is pressed
halfway if Pixel Track SR is set to P (Off) and there is a danger of camera
shake.
* For 13, when the focus mode is set to = and the Auto Macro function is
activated, q appears on the display (p.40).
* 15 appears for two seconds after the camera is turned on.
* 17 changes depending on [D-Range Setting] settings in the [A Rec. Mode]
menu. No icon is displayed on the screen when [Highlight Correction] and
[Shadow Correction] are both set to [Off].
* When the shooting mode is b (Auto Picture) and if you press the shutter
release button halfway, the automatically selected shooting mode appears in
A1 even when “No Info” is selected.
* If there are overexposed highlight areas in the image, they will blink red on the
display, and if there are underexposed shadow areas, they will blink yellow.
* Some indications may not appear depending on the shooting mode.
Display in Q Mode
The display shows the shooting information of the image in playback mode. The
display changes in the following sequence each time you press the 4 button:
Normal Display/Histogram + Info in Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. In "Normal
Display", A1 to A9 are displayed. In "Histogram + Info", B1 to B8 are displayed as
well.
A1
A2
A3
A4
B1
B2
A5
1/250
1/25
F3.
F3.5
Edit
Edit
M
12
B6 B7 B8
B5
AWB
10
003
100-0038
IS
20
ISO
200
A6
A7
A8
A9
B3
B4
13
Face Detection icon
OK
SHUTTER
A1
Playback mode
A2
Q : Still picture (p.45)
K : Movie (p.45)
Battery level indicator (p.18)
A3
Protect icon
A4
Four-way controller guide
A5
File number
A6
Folder number
A7
Memory status (p.21)
A8
Volume icon
A9
Shutter speed
B1
Aperture
B2
Histogram
B3
Sensitivity
B4
Recorded Pixels
B5
Quality Level
B6
White Balance
B7
AE Metering
B8
* A1 appears only if the Face Detection function worked when the image was shot.
* In “Normal Display”, A3 disappears if no operation is performed for two seconds.
* A5 appears even when “No Info” is selected, but disappears if no operation is
performed for two seconds. When no operation is performed for two seconds in
“Normal Display” or “Histogram + Info”, only “Edit” disappears.
* A9 appears only when the volume is being adjusted during playback of movies
(p.45).
* When “Normal Display” is selected, the shooting date and time appears for two
seconds in the B4 to B8 positions.
* If there are overexposed highlight areas in the image, they will blink red on the
display, and if there are underexposed shadow areas, they will blink yellow.
Guide Display
A guide indicator for each available button or key operation appears as follows on
the display during operation.
2 Four-way controller (2) Zoom button
3 Four-way controller (3) 4 button
4 Four-way controller (4) Shutter release button
5 Four-way controller (5) X (green),
MENU
3 button
i Green/i button
(red) Movie button
14
Powering the Camera
Battery/card cover
lock lever
Battery lock lever
Battery/card
cover
Battery
Installing the Battery
Use the rechargeable lithium-ion battery D-LI92 that is provided with the camera.
1
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown 1, slide the cover
towards 2 and open it towards 3.
2
Using the side of the battery to press the battery lock lever in
the direction of 4, insert the battery with the PENTAX logo
pointing toward the lens.
Push the battery in until it is locked in place.
If the battery is incorrectly oriented, malfunction may result.
3
Close the battery/card cover.
Push down and slide the battery/card cover with steady but gentle force in the
opposite direction indicated by 2.
The battery/card cover may be difficult to close because the waterproof packing
is very thick to prevent water from entering the camera.
To close the battery/card cover, push down on it toward the camera with your
thumb where it says [PUSH]. Then slide it until the battery/card cover lock lever
slides into place covering the yellow mark on the lock lever.
15
Removing the Battery
1
Open the battery/card cover.
2
Push the battery lock lever towards 4.
The battery will be ejected. Take care not to drop the battery when removing it.
• Do not use excessive force when opening and closing the battery/card
cover because the waterproof seal may peel off. If the seal is not in the
correct position, the camera will not be waterproof.
• If the battery/card cover is not locked securely, water, sand, or dirt may get
into the camera.
• This camera uses a rechargeable lithium-ion battery D-LI92. Use of any
other type of battery may damage the camera and cause malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented, malfunction
may result.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the battery for 30
minutes using the power adapter and store the battery separately.
Be sure to recharge the battery every 6 to 12 months. Storing the battery
below room temperature is ideal. Avoid storing it in high temperatures.
• The date and time may be returned to the default settings if the camera is
left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the camera
is used continuously for a long period of time.
• Allow the camera to dry completely before changing the battery. Avoid
changing the battery where the camera is likely to get wet or dirty, and
make sure that your hands are dry.
16
Charging the Battery
2
3
USB cable
Power adapter
4
To power outlet
Power lamp
While charging: Blinks
Charging finished: Turns off
Connect the supplied power adapter (D-PA164) to the camera and charge the
battery before using it for the first time or after a long period of non-use, or when
the [Battery depleted] message appears.
1
Make sure that the camera is turned off and open the terminal cover.
Move the terminal cover lock lever in the direction shown by 1, slide the cover
in the direction shown by 2 and open the cover in the direction shown by 3.
2
Connect the USB cable to the power adapter.
3
Connect the USB cable to the camera.
4
Plug the power adapter into the power outlet.
The power lamp blinks while charging.
When charging is finished, the power lamp turns off.
The terminal cover will not close while charging. Leave the cover open when
charging and do not attempt to close it.
5
Unplug the power adapter from the power outlet when
charging is finished.
17
6
Remove the USB cable from the camera.
7
Close the terminal cover.
Close the terminal cover in the opposite direction indicated by 3. While lightly
pressing on the cover, slide it away from 2 until it clicks.
• Do not use the supplied power adapter (D-PA164) for any other purpose
than that of connecting to this camera and charging the designated battery.
Doing otherwise may cause a connected device to be damaged or
overheated.
• The battery has reached the end of its service life when it starts to run down
soon after being charged. Replace it with a new battery.
• If the camera is connected to the power outlet but the charging indicator
fails to light, the battery may be faulty. Replace it with a new battery.
• The time required to fully charge the battery is about 120 minutes (max.).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging
the battery is 0°C to 40°C (32°F to 104°F).
•
You cannot turn on the camera while it is charging.
• Image Storage Capacity, Movie Recording Time, and Playback Time
(at 23°C (73.4°F) with the display on and the battery fully charged)
Image Storage Capacity
(flash used for 50% of shots)
Approx. 300 pictures Approx. 90 min. Approx. 260 min.
*1
Movie Recording Time
*2
Playback Time
*2
*1 The image storage capacity shows the approximate number of shots recorded
during CIPA-compliant testing (at 23°C (73.4°F) with display on and flash used for
50% of the shots). Actual performance may vary according to operating conditions.
*2 According to the results of in-house testing.
• Battery performance may deteriorate as temperature decreases. When
using the camera in cold regions, we recommend carrying a spare battery
in your pocket to keep it warm. Battery performance will recover when the
temperature returns to normal.
• Be sure to take a spare battery with you when traveling abroad or to a cold
region, or if you intend to take a lot of pictures.
• Battery Level Indicator
You can check the battery level by the indicator on the display.
Screen Display Battery Status
(green) Adequate power remains.
(green) Battery is running low.
(yellow) Battery is running very low.
(red) Battery is exhausted.
[Battery depleted] The camera will turn off after this message appears.
18
Loading...