RICOH WG-4 GPS
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
100
-
0038
139
35
41' 29"
N
W
45' 52"
06 : 25:00
Edit
/04 0
4/'14
3200
m
ɋ
180
700
hPa
㧙
㧙
Utilities Guide for GPS
Before Using the GPS ................................. 2
Using the GPS ............................................. 5
This manual describes how to use the GPS function on the RICOH WG-4 GPS
and precautions when using it. Please read this manual before using the GPS
function on the camera.
54791 R01BAL13
Printed in Indonesia
Before Using the GPS
About the GPS
GPS means the Global Positioning System. The camera receives
signals from multiple GPS satellites to determine its position and the
time. This is called "positioning".
GPS Function on the RICOH WG-4
Embeds location information on an image
Location information such as latitude and longitude of a shooting
location is recorded. The shooting location can be displayed on a map
by using the provided software.
Saves log files to the SD Memory Card
The camera receives signals from GPS satellites regularly and saves
GPS information to the SD Memory Card as a log file in KML format. The
log files can be imported to Google Earth, Google Maps or other
programs that can read KML files on a computer and your route can be
displayed on their maps.
*Google, Google Earth
Inc.
Corrects the camera clock using GPS information
The camera corrects its clock automatically using the time data received
from GPS satellites.
Displays the electronic compass on the screen
The camera has the Electronic Compass function that displays the lens
direction at the time of shooting on the screen.
When the camera receives signals from GPS satellites, it indicates the
orientation to true north using GPS location information. The location
information can be recorded on captured images.
When the camera does not receive any signals or the GPS function is
set to off, it indicates the orientation to magnetic north.
1 [Electronic Compass Display in Still Picture Capture Mode]
(Operating Manual p.24)
TM
and Google MapsTM are trademarks of Google
Precautions for Using the GPS
• The GPS function is set to off as the default. To use it, set [GPS On/
Off] to [On].
• GPS satellites always move. Depending on conditions (location, time
etc.), positioning may take longer or be impossible.
• To use the GPS function, you must be in an open area, such as out of
doors.
• Positioning may be difficult or impossible in the following situations:
- Under water
- Under ground or indoors
- In tunnels
- Among high-rise buildings
- Under elevated or near high-voltage electrical power lines
- In the woods
- Near mobile phones that use the 1.5 GHz band
• When the GPS function is set to on, the camera performs positioning
regularly even if it is turned off. Make sure that [GPS On/Off] is set to
[Off] (p.5) before turning off the camera when taking it where using
electronic products is prohibited, such as hospitals or airplanes.
• Positioning may take a few minutes when using the GPS function for
the first time, after not positioning for a long while, or after changing
the battery.
• The Geodetic system for this camera’s GPS function uses the World
Geodetic System 1984 (WGS 84).
• Using the GPS or recording location information is prohibited in some
countries or regions. Consult the appropriate embassy or a travel
agent before travelling with a GPS camera.
• Do not carry the camera in a metal container during positioning. If the
camera is covered with metal, GPS positioning cannot be achieved.
• In the following situations, the camera cannot obtain GPS information.
It starts positioning again immediately after being out of the following
situations:
- When the alarm is set
-
When the camera is connected to a computer with a USB cable
- When the camera is connected to an AV device with an AV or HDMI
cable
- For a minute after changing the battery
• The GPS function of this camera was designed and manufactured for
personal digital camera use only. Do not try to use it as a navigation
tool for aircraft, motor vehicles, or people, or for surveying. We will not
be held liable for any damages caused by use of this camera for any
of these purposes.
Hereby, RICOH IMAGING COMPANY, LTD., declares that this SG761
GPS Module/GYSFDMASA-P2 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/ 5/EC.
For a full version of the Declaration of Conformity (DoC), please refer to
http://www.ricoh-imaging.co.jp/english.
The CE Mark is a Directive conformity mark of the European Union.
Using the GPS
Preparation for Using the GPS Function
Set the [GPS On/Off] to [On] for receiving GPS information (latitude,
longitude, altitude, date and time etc.).
The GPS function needs to be always activated to embed GPS
information on an image (p.6), record it to the camera as a log (p.8), save
it to the SD Memory Card as a log file (p.10), and correct the camera
clock automatically (p.14).
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23) to select [GPS On/
Off].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller
(23) to select [Off] or [On].
Off: Does not receive GPS
information
On: Receives GPS information
• When [GPS On/Off] is set to [On], the camera performs positioning
regularly even while the camera power is off, which reduces the
battery life.
Estimated battery life: Approx. 60 hr.
(When receiving GPS information continuously with [GPS On/Off] set
to [On], [Logging Interval] set to [15sec.], and the camera turned off.)
• Before changing the battery, set [GPS On/Off] to [Off].
5
GPS
GPS On/Off
GPS Logging
GPS Time Sync
MENU
Cancel
2
Recording GPS Information on Captured Images
When [GPS On/Off] is set to [On], the received GPS information is
recorded onto captured images.
The following icons appear on the display.
GPS information is being received. [GPS On/Off] is set to [On], and
signals from GPS satellites are being received.
(White)
GPS information has been received. [GPS On/Off] is set to [On], and
signals from GPS satellites have been received.
GPS information has not been received. [GPS On/Off] is set to [On], but
signals from GPS satellites have not been received.
(Red)
GPS error. To recover from an error, turn off the camera, remove and then
re-insert the battery and turn on the camera again. If is still displayed,
the built-in GPS unit may be malfunctioning. Contact your nearest service
When [GPS On/Off] is set to [Off], no icon is displayed.
Off
On
Off
OK
OK
center.
• Only when is displayed on the capture mode screen, GPS
information will be recorded onto images.
However, in the following situations GPS information obtained prior to
the shooting may be recorded.
• When doing interval shooting
• When the camera fails to determine its position because it has been
moved to a location where it cannot receive GPS signals
• When [GPS On/Off] is set to [On], the camera performs positioning
regularly even while the camera power is off, which reduces the
battery life.
• For a movie, the GPS information obtained at the start of recording is
recorded.
• For divided movie files, the GPS information before dividing is
displayed.
• For a movie with a title picture, the GPS information of the movie is
displayed.
• When shooting in (Interval Shot) mode, GPS information may not
be recorded onto images.
• The direction information obtained from the electronic compass
measurements is also recorded at the time of shooting when GPS
location information can be obtained from GPS satellites.
6
Displaying the GPS Information Recorded on Captured Image
1
Press the Q button after shooting still pictures or
movies.
The camera enters Q mode and an image appears on the display.
2
Press the 4 button until the Info 2 display appears.
If GPS information cannot be
obtained, "--" appears on the display.
*The date and time information is
displayed in GPS time (the reference
time scale of the GPS system). This
may be different from the time you
have set on the camera.
The image on which the GPS information is recorded can be imported
to a computer using the supplied software "MediaImpression 3.6.2 LE"
(for Windows) and the location where the image was taken can be
displayed on the map.
Select an image in the preview screen and click (location) in the
[Property] area to display the map.
*To display the map, you need to connect your computer to the Internet.
3
Recording and Saving a Log
Obtains GPS information at the interval and for the duration you have set
and records it to the camera as a log.
The recorded log will be saved to the SD Memory Card as a log file (KML
format).
Height, air pressure,
and lens direction
10
003
100-0038
3200
3200
m
hPa
700
hPa
700
180
180
ɋ
06: 25:00
4/'14
/04 0
4/'14
35
N
45' 52"
45' 52"
35
W
139
139
41' 29"
Edit
Edit
GPS time
7
GPS latitude and longitude
41' 29"
Recording a Log at a Set Interval and Duration
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller
(23) to select [GPS
Logging].
If this item is grayed out and cannot be
selected, set [GPS On/Off] to [On].
4
Press the four-way controller (5).
The [GPS Logging] screen appears.
5
Use the four-way controller
(23) to select [Record log],
and press the four-way
controller (5).
The [Record log] screen appears.
6
Use the four-way controller (23) to select [Logging
Interval], and press the four-way controller (5).
A pull-down menu appears.
4
GPS
GPS On/Off
GPS Logging
GPS Time Sync Off
MENU
GPS Logging
Record log
Save log data
Discard log data
MENU
8
On
㧙
㧙
7
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
Max # of logs already saved.
Delete all existing logs and
save current log as new?
㧙
㧙
OFF
㧙
㧙
㧙
㧙
Use the four-way controller
(23) to select the logging
interval, and press the 4
button.
8
Use the four-way controller (23) to select [Logging
Record log
Starts log recording
Logging Interval
Logging Duration
MENU
Cancel
Duration], and press the four-way controller (5).
9
Use the four-way controller
(23) to select the logging
duration, and press the 4
button.
10
Use the four-way controller
(23) to select [Start], and
press the 4 button.
• After recording a log, the camera cannot record a new log until the
existing log is saved to the SD Memory Card as a log file (p.10) or
discarded (p.12).
• [Record log] can be set only when [GPS On/Off] is set to [On].
• When the battery level indicator is (red), the camera does not
record a log.
• (Interval Shot) and (Interval Movie) cannot be selected from the
Capture Mode Palette while recording a log.
Record log
Starts log recording
Logging Interval
Logging Duration
MENU
Cancel
Record log
Starts log recording
Logging Interval
Logging Duration
MENU
Start
Start
Start
15sec.
30sec.
1min.
15sec.
1hr.
15sec.
1hr.
Stopping Recording a Log
Selecting [Record log] while recording a
log displays a confirmation screen. Select
[Stop] and press the 4 button to stop
OK
OK
recording the log.
Record log
Stops log recording
Logging Interval
Logging Duration
MENU
Stop
15sec.
1hr.
OK
OK
Saving the Recorded Log
Saves the recorded log to the SD Memory Card as a log file (KML
format). The log files are saved in the [GPSLOG] folder under the root
directory of the SD Memory Card.
1
Use the four-way controller (23) to select [GPS] in the
OK
OK
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller
(23) to select [GPS
OK
OK
Logging].
4
Press the four-way controller (5).
GPS
GPS On/Off
GPS Logging
GPS Time Sync Off
MENU
On
6
Use the four-way controller
(23) to select [Save], and
press the 4 button.
7
Press the 4 button.
Saves log data to memory
card. Do not remove battery
or card until complete
Returns to the [GPS Logging] screen.
• The log files can be saved on the SD Memory Card only (you cannot
save them in the built-in memory).
• Up to 999 log files or to the full capacity of the SD Memory Card can
be saved.
• The information saved in log files is latitude, longitude, altitude and
date and time.
• The log files cannot be displayed on the camera. Transfer them to a
computer and use the software that supports files in the KML format
such as Google Earth or Google Maps.
Save
Cancel
OKOKOK
OK
The [GPS Logging] screen appears.
5
Use the four-way controller (23) to select [Save log
data], and press the 4 button.
Discarding the Recorded Log
Discards the recorded log without saving it to the SD Memory Card.
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller
(23) to select [GPS
Logging].
4
Press the four-way controller (5).
GPS
GPS On/Off
GPS Logging
GPS Time Sync Off
MENU
On
The [GPS Logging] screen appears.
5
Use the four-way controller (23) to select [Discard log
data], and press the 4 button.
A confirmation screen appears.
6
Use the four-way controller
(23) to select [Discard].
7
Press the 4 button.
Discards log data
without saving it
Discard
Cancel
OKOKOK
OK
A confirmation screen appears.
9
Deleting Logs
If 999 log files are saved on the SD Memory Card, no more log file can
be saved on it. Insert a new SD Memory Card or delete logs according
to the following procedures to save new ones.
1
Turn the camera on.
[Max # of logs already saved. Delete all existing logs and save current
log as new?] message is displayed.
2
Use the four-way controller
(23) to select [Delete All].
3
Press the 4 button.
Max # of logs already saved.
Max # of logs already saved.
Delete all existing logs and
Delete all existing logs and
save current log as new?
save current log as new?
Delete All
Cancel
OKOKOK
OKOKOK
All the logs are deleted and the camera returns to capture mode.
If you select [Cancel], you can continue shooting still pictures or movies
although you cannot save a log file on the SD Memory Card.
If you start up the camera in playback mode, the camera returns to
playback mode after deleting log files.
10
Correcting Time Automatically
The camera corrects its clock automatically using the time data received
from GPS satellites.
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23) to select [GPS Time
Sync].
If this item is grayed out and cannot be selected, set [GPS On/Off] to
[On].
4
Press the four-way controller
(5).
The setting of [World Time] is
displayed.
5
Use the four-way controller
(45) to switch between [On]
and [Off].
GPS
GPS On/Off
GPS Logging
GPS Time Sync Off
MENU
Destination
New York
Syncs camera time to
current GPS location
MENU
Off
Cancel
On
04/04/2014
01:25
Time Dif.
+5:00
OK
DST
OF
OFF
OK
11
• [GPS Time Sync] can be set only when [GPS On/Off] is set to [On].
• The GPS Time Sync function does not work in the following situations:
• During movie recording
• During movie playback
• During slideshow
• When (Interval Shot) or (Interval Movie) is set
• When the self-timer is set
Adjusting the Electronic Compass (Calibration)
Calibration is the process of making adjustments to a device in order to
obtain accurate information. Always calibrate the electronic compass
before using it.
1
Use the four-way controller (23) to select [Electronic
Compass] in the [WSetting] menu.
2
Press the four-way controller (5) twice.
The [Calibration] screen appears.
3
Wrap the strap around your wrist so you do not drop the
camera, and then rotate the camera at least 180 degrees
each vertically, horizontally, and laterally.
[Complete] appears when the camera
is successfully calibrated.
Calibration
Rotate camera in each of 3
directions ensuring that
each rotation exceeds 180°
12
• Do not swing or twirl the camera while changing your grip on it.
• If calibration is unsuccessful, face in a different direction and/or slightly
change the angle of grip, and then try calibration again.
• The electronic compass may not show the proper direction due to the
passing of time, or the change of the camera location. We recommend
periodically calibrating the camera.
• Calibration can be done regardless of the GPS signal reception status.
• At locations that are strongly affected by environmental magnetism, it
may be difficult to achieve successful calibration, or the electronic
compass may not show the proper direction even if calibration is
completed. The same may result when the camera is calibrated
indoors.
• At locations that are affected by geomagnetism, such as in volcanic
regions, it may be difficult to achieve successful calibration, or the
electronic compass may not show the proper direction even if
calibration is completed.
• If you cannot calibrate the camera within one minute of rotating the
camera in three directions, the process will fail and the message
[Cannot process correctly] appears. If this happens, try calibration
again.
6
Press the 4 button.
Returns to the [GPS] screen.
4
Press the 4 button.
The screen returns to the [WSetting] menu.
13
14
15
16
Loading...