To ensure the best performance from your
camera, please read the Operating Manual
before using the camera.
Thank you for purchasing this RICOH WG-4 GPS/RICOH WG-4 Digital Camera.
Please read this manual before using the camera in order to get the most out of
all the features and functions. Keep this manual safe, as it can be a valuable tool
in helping you to understand all the camera’s capabilities.
This operating manual applies to RICOH WG-4 GPS/RICOH WG-4.
The illustrations used in this manual are those of RICOH WG-4 GPS.
Regarding copyrights
Images taken with the RICOH WG-4 GPS/RICOH WG-4 that are for anything other
than personal enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are cases where limitations
are placed on taking pictures even for personal enjoyment during demonstrations,
performances or of items on display. Images taken with the purpose of obtaining
copyrights also cannot be used outside the scope of use of the copyright as laid out in
the Copyright Act, and care should be taken here also.
Regarding trademarks
• SDXC logo is a trademark of SD-3C, LLC.
• Microsoft, Windows and Windows Vista are registered trademarks of Microsoft
Corporation in the United States of America and other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
•ArcSoft
®
, and its logo are either the registered trademark or trademark of
ArcSoft Inc. in the United States and/or other countries.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing, LLC in the United States and/or
other countries.
• Eye-Fi, the Eye-Fi logo, and Eye-Fi connected are trademarks of Eye-Fi, Inc.
• Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the U.S.
and/or other countries.
• AMD, AMD Athlon, and ATI Radeon are trademarks or registered trademarks
of Advanced Micro Devices, Inc.
• NVIDIA and GeForce are trademarks and/or registered trademarks of NVIDIA
Corporation in the U .S. and/or other countries.
• This product supports PRINT Image Matching III. PRINT Image Matching
enabled digital still cameras, printers and software help photographers to
produce images more faithful to their intentions. Some functions are not
available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
• This product is licensed under the AVC Patent Portfolio License for the personal
use of a consumer or other uses in which it does not receive remuneration to (i)
encode video in compliance with the AVC standard (“AVC video”) and/or (ii)
decode AVC video that was encoded by a consumer engaged in a personal
activity and/or was obtained from a video provider licensed to provide AVC
video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
• All other trademarks are the property of their respective owners.
Regarding Product Registration
In order to better serve you, we request that you complete the product registration,
which can be found on the CD-ROM supplied with the camera or on our website.
Thank you for your cooperation.
Refer to “Product Registration on the Internet” (p.198) for more information.
To users of this camera
• Do not use or store this camera in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fie lds.
Strong static charges or the magnetic fields pro duced by equipment such as radio
transmitters could interfere with the display, damage the stored data, or affect the
camera’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used for the display is manufactured using extremely high
precision technology. Although the level of functioning pixels is 99.99% or better, you
should be aware that 0.01% or fewer of the pixels may not illuminate or may
illuminate when they should not. However, this has no effect on the recorded image.
• There is a possibility that the illustrations and the screen display in this manual are
different from the actual ones.
• In this manual, SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards
are referred to as SD Memory Cards.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or a
Macintosh.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this
camera and its accessories.
Using Your Camera Safely
We have paid close attention to the safety of this camera. When using
this camera, we request your special attention regarding items marked
with the following symbols.
Warning
Caution
This symbol indicates that ignoring this item could
cause serious personal injuries.
This symbol indicates that ignoring this item could
cause minor or medium personal injuries, or loss of
property.
1
About the Camera
Warning
• Do not attempt to take the camera apart or modify the camera. High voltages
are present within the camera, and there is a danger of electric shock if the
camera is taken apart.
• If the inside of the camera should become exposed as a result of, for example,
the camera being dropped, please do not under any circumstances touch such
exposed portions, as there is a danger of receiving an electric shock.
• Wrapping the strap around a neck is dangerous. Take care that small children
do not hang the strap around their necks.
• If any irregularities occur during use, such as smoke or a strange odor, stop use
immediately, remove the battery or the AC adapter, and contact your nearest
service center. Continued use can cause a fire or electric shock.
Caution
• Do not place your finger on the flash when it is discharging as there is a risk of
burns.
• Do not discharge the flash while it is touching your clothing as there is a risk of
discoloring.
• Some portions of the camera heat up during use, so please take care, as there
is a risk of low temperature burns if such portions are held for long periods of
time.
• Should the display be damaged, be careful of glass fragments. Also, be careful
not to allow the liquid crystal to get on your skin, in your eyes, or in your mouth.
• Depending on your individual factors or physical condition, the use of the
camera may cause itching, rashes or blisters. In case of any abnormality, stop
using the camera and get medical attention immediately.
2
About the Power Adapter and the AC Adapter
Warning
• Always use the power adapter or AC adapter exclusively developed for this
camera, with the specified power and voltage. Using a power adapter or AC
adapter not exclusive to this camera, or using the exclusive power adapter or
AC adapter with an unspecified power or voltage can cause a fire, electric
shock, or camera breakdown. The specified voltage is 100-240V AC.
• Do not disassemble or modify the product. This can cause a fire or electric
shock.
• If the generation of smoke or strange odor from the product or other abnormality
occurs, immediately discontinue its use and consult your nearest service
center. Continued use can cause a fire or electric shock.
• If water should happen to get inside the product, consult your nearest service
center. Continued use can cause a fire or electric shock.
• If you see a lightning flash or hear thunder during use of the power adapter or
AC adapter, unplug the AC plug and discontinue use. Continued use can cause
damage to the product, fire, or electric shock.
• Wipe off the AC plug if it becomes covered with dust. Accumulated dust may
cause a fire.
Caution
• Do not place or drop heavy objects on or forcefully bend the USB cord or AC
plug cord. Doing so may damage the cord. Should the cord be damaged,
consult your nearest service center.
• Do not touch or short-circuit the terminal area of the USB cord or AC plug cord
while the cord is plugged in.
• Do not handle the AC plug with wet hands. This can cause an electric shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
• Do not use the power adapter to charge a battery other than a rechargeable
lithium-ion battery D-LI92. This can cause overheating, explosion, or power
adapter failure.
•
To reduce the risk of hazards, use only a CSA/UL certified power supply cord set,
cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a
molded-on male attachment pl ug cap (wit h a specified NEMA configur ation), and
the other is provided with a molded-on female connector body (wi th a specif ied IEC
nonindustrial type configuration) or the equivalent.
3
About the Battery
Warning
• Be sure to store the battery out of the reach of small children. Placing it in their
mouths may cause an electric shock.
• If any leakage from the battery should come in contact with your eyes, it may
cause a loss of sight. Flush your eyes with clean water and get medical
attention immediately. Do not rub them.
Caution
• Only use the specified battery with this camera. Use of other batteries may
cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an
explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or begins to
smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and - contacts of
the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an
explosion or fire.
•
If any leakage from the battery should come in contact with skin or clothes, it may
cause irritation to the skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI92 Battery Usage:
BATTERY MAY EXPLODE OR FIRE IF MISTREATED.
- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.
- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.
- DO NOT HEAT ABOVE 140°F / 60°C, OR SHORT CIRCUIT.
- DO NOT CRUSH OR MODIFY.
Keep the Camera and its Accessories out of the Reach of Small
Children
Warning
• Be sure to keep the camera and its accessories out of the reach of small
children.
1. Injuries may result from the product falling or from unexpected movement.
2. Suffocation may result from wrapping the strap around the neck.
3. Small accessories such as battery or an SD Memory Card may be
swallowed. Seek medical attention immediately if an accessory is
accidentally swallowed.
4
Care to be Taken During Handling
Before Using Your Camera
• When traveling, take the Worldwide Service Network listing that is included in
the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at a
wedding or when traveling). Contents of the recording cannot be guaranteed if
recording, playback or transferring your data to a computer, etc. is not possible
due to a malfunction of your camera or recording media (SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
About the Battery and Power Adapter
• To keep the battery in optimum condition, avoid storing it in a fully charged state
or in high temperatures.
• If the battery is left inserted and the camera is not used for a long time, the
battery will over-discharge and shorten the battery’s life.
•
Charging the battery a day befor e use or on the day of use i s recommended.
• The AC plug adapter D-PL135 is designed for exclusive use with t he Power
Adapter D-PA135. Do not use it with other devices.
Precautions on Carrying and Using Your Camera
•
Hot and humid places should be avoided. Particular care should be taken
regarding vehicles, which can become very hot inside.
• Ensure that the camera is not subjected to substantial vibrat ions, shocks, or
pressure as this may cause damage, malfunction, or a loss in waterproof
performance. Place the camera on a cushion for protection when the camera is
subjected to the vibrations of a motorbike, car, ship, etc. If the camera is
subjected to substantial vibrations, shocks, or pressure, take your camera to
your nearest service center and have it checked.
• The temperature range in which the camera can be used is -10°C to 40°C (14°F
to 104°F).
• The display will become black at high temperatures but will return to normal at
normal temperatures.
• The response speed of the display becomes slow at low temperatures. This is
due to the properties of the liquid crystal and is not a malfunction.
5
• If the camera is subjected to rapid temperature changes, condensation may
form on the inside and outside of the camera. Therefore put the camera in a bag
or plastic bag and take it out when the difference in temperature has subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt. These
could cause t he camera to breakdown. Wipe the camera to dry off any rain or
water drops.
• Do not press the display with excessive force. This could cause it to break or
malfunction.
• Be careful not to sit down with the camera in your back pocket as this may
damage the exterior of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the screw in
the tripod socket on the camera.
Cleaning Your Camera
• Do not clean the camera with organic solvents such as thinner, alcohol or
benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray
blower for cleaning as it may damage the lens.
Storing Your Camera
• Avoid storing the camera where pesticides and chemicals are handled.
Remove the camera from its case and store it in a well-ventilated place to
prevent the camera from becoming moldy during storage.
• Avoid using or storing the camera where it may be exposed to static electricity
or electrical interference.
• Avoid using or storing the camera in direct sunlight or in locations where it may
be exposed to rapid changes in temperature or to condensation.
• Periodic inspections are recommended every one to two years to maintain high
performance.
6
Other Precautions
Write-protect
switch
• The SD Memory Card is equipped with a
write-protect switch. Setting the switch to
LOCK prevents new data from being
recorded on the card, the stored data from
being deleted, and the card from being
formatted by the camera or computer.
r appears on the display when the card is
write-protected.
• Care should be taken when removing the SD Memory Card immediately
after using the camera, as the card may be hot.
• Keep the battery cover closed and do not remove the SD Memory Card or
turn the camera off while the data is being played back or saved to the
card, or the camera is connected to a computer with the USB cable, as this
may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it
away from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage
the card and render it unusable.
• The data on the SD Memory Card may be lost in the following
circumstances. We do not accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical
interference.
(3) when the SD Memory Card has not been used for a long time.
(4) when the SD Memory Card is ejected or the batteries are removed
while the card is being accessed.
• If it is not used for a long time, the data on the card may become
unreadable. Be sure to regularly make a backup of important data on a
computer.
• Be sure to format SD Memory Cards that are unused or have been used
on another camera. Refer to “Formatting the Memory” (p.167).
• When using an SD Memory Card with a slow recording speed, recording
may stop while recording a movie even if there is adequate space in the
memory, or image capture or playback may take a long time.
• Please note that deleting data, or formatting the SD Memory Cards or the
built-in memory does not completely erase the original data. Deleted files
can sometimes be recovered using commercially available software. It is
user’s responsibility to ensure the privacy of such data.
7
Regarding Waterproof, Dustproof, and
Contact surface
Waterproof seal
Shockproof Design
• This camera is provided with a waterproof/dustproof design complying with JIS
waterproof grade 8 and JIS dustproof grade 6 (equivalent to IP68).
• The camera satisfies our drop test (2.0 m height onto a 5 cm thick plywood
surface) complying with MIL-Standard 810F Method 516.5-Shock testing.
• The camera satisfies our test for the waterproof, dustproof, and shockproof
performance, but this does not guarantee it will remain free of trouble or
damages.
• Waterproof performance is not guaranteed if the camera is exposed to impact
such as being dropped or hit.
Precautions Before Using the Camera in the
Water
Check the Following Before Going Near the Water
• Make sure that there are no cracks or scratches on the rubber seal of the
battery cover.
• Make sure that there are no foreign objects (dust, sand, hair, lint or liquid) on the
rubber seal or the surface they contact before closing the bat tery cover. Wipe
off any foreign objects with a clean lint-free cloth.
• Close the battery cover properly. Otherwise water may get in and damage the
camera.
8
Be Careful Near the Water
• Avoid opening the battery cover when near the waterside or with wet hands.
When changing the battery or the SD Memory Card, avoid places where the
camera is likely to get wet or dirty, and make sure that the camera and your
hands are completely dry.
• The camera will sink if dropped in water, so be sure to attach the strap to the
camera and wrap it around your wrist when using the camera in or near water.
• To enhance the waterproof performance of the camera, the front of the lens is
protected by glass. The glass should be kept clean at all times, as any dirt or
water on the glass will affect the quality of pictures taken.
Precautions When Using the Camera in the Water
• Do not use the camera deeper than 14 meters underwater. Do not use the
camera underwater for more than 120 minutes consecutively.
• Do not open the battery cover underwater.
• Do not use the camera in hot water or in a hot spring.
• Do not apply excessive force to the camera, for example diving into water with
it. Doing so may compromise the waterproof performance of the camera or
cause the cover to open.
• Do not leave the camera on the sand at the beach, as this may cause the
camera to exceed the upper limit of its operational temperature range, or cause
the speaker or microphone to become blocked with sand.
• Avoid subjecting the camera to substantial vibrations, shocks, or pressure as
this may cause a loss in waterproof performance. If the camera is subjected to
substantial vibrations, shocks or pressure, take your camera to your nearest
service center and have it checked.
• Avoid getting sunscreen or sun oil on the camera as it may cause discoloration
of the surface. If any oil gets on the camera, wash it off immediately with warm
water.
• Sudden and extreme changes in temperature may cause condensation to form
in and on the camera. Keep the camera in a bag or case to reduce the
difference in temperature.
9
Precautions After Using the Camera in the Water
• Do not open the battery cover if the camera is wet. Wipe off any water with a
clean lint-free cloth.
• The inside surface of the cover may get wet when it is opened. Wipe off any
water that is on the cover.
• Wiping off the camera while there is sand or dust on it may scratch the surface
of the camera. Make sure that the battery cover is firmly closed before washing
the camera in tap water. After washing the camera, dry it with a soft cloth.
• Wipe off any dirt or sand on the waterproof seal or the contact surface. The
camera’s waterproof performance may be compromised by a loose seal, or
cracks or dents on the seal or the contact surface. If there is any such damage,
contact your nearest service center.
• If the camera becomes very dirty or after it has been used in the sea, make sure
that it is turned off and the battery cover is firmly closed before rinsing it under
running tap water or leaving it in a bowl of clean water for a short time (2 or 3
minutes).
• Avoid cleaning with agents such as soapy water, mild detergents, or alcohol as
this may compromise the waterproof performance of the camera.
• To maintain the waterproof performance of the camera, you are recommended
to change the waterproof seal once a year. Contact your nearest service center
regarding changing the seal. (A charge will be made.)
• The camera’s accessories are not waterproof.
10
Contents
Using Your Camera Safely...................................................................... 1
Care to be Taken During Handling.......................................................... 5
Regarding Waterproof, Dustproof, and Shockproof Design.................... 8
Precautions Before Using the Camera in the Water................................ 8
Precautions When Using the Camera in the Water................................. 9
Precautions After Using the Camera in the Water................................. 10
In this manual, the method for operating the four-way controller is shown in
5
or
2 or
3
or
or
4
3
5
2
4
4
2
5
3
illustrations, such as in the ones below.
The meanings of the symbols used in this Operating Manual are explained below.
1
Indicates the reference page number for an explanation of the
related operation.
Indicates information that is useful to know.
Indicates precautions to be taken wh en operatin g the camera.
16
Composition of the Operating Manual
This Operating Manual contains the following chapters.
1 Getting Started ––––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera before
you start taking pictures. Be sure to read it and follow the instructions.
2 Common Operations –––––––––––––––––––––––––––––––––––––––––––
This chapter explains common operations such as t he functions of the buttons and
how to use the menus. For more details, refer to the respective chapters below.
This chapter provides some basic troubleshooting tips and other useful
informa tion.
1
2
3
4
5
6
7
8
17
Checking the Contents of the Package
1Getting Started
1
Getting Started
Camera
RICOH WG-4 GPS/
RICOH WG-4
USB cable
I-USB7 (*2)
Macro stand
O-MS2
Carabiner strap (*1)Software (CD-ROM)
Rechargeable lithium-ion
battery D-LI92 (*2)
Operating Manual
(this manual)
Quick Guide
Power adapter D-PA135/
AC plug adapter D-PL135 (*3)
By visiting www.ricoh-imaging.eu you will be able to download the operating
manual, to register your product, to apply for newsletters or to find the latest
firmware information.
*1 As listed below, the type of the carabiner strap supplied with the camera varie s
depending on the model or body color of the camera.
<RICOH WG-4 GPS>
Black: Carabiner strap O-ST144 (Black & White)
Blue: Carabiner strap O-ST145 (Black & Lime Yellow)
<RICOH WG-4>
Silver: Carabiner strap O-ST144 (Black & White)
Lime Yellow : Carabiner strap O-ST145 (Black & Lime Yellow)
*2 Available as optional accessories.
*3 The AC plug adapter is attached to the power adapter.
18
S-SW145
Names of Parts
Shutter release button
Lens
Power button/Power lamp (green)
Flash
Remote control receiver
LED Macro Lights
Microphones
Sub-display (*)
Strap lug
Self-timer lamp/
Focus assist light
Display
Tripod socket
USB/AV terminal
Battery lock lever
Battery cover lock
HDMI terminal
Battery cover
Remote control receiver
Speakers
Release latch
Front
(*) Only available with the RICOH WG-4 GPS.
Back
1
Getting Started
19
Names of Operating Parts
4 button
3 button
Four-way controller
Green/i button
Power button
Q button
W/T/f/y button
Shutter release button
Movie button
1
Getting Started
Refer to “Understanding the Button Fu nctions” (p.48 - 51 ) for an explanation
of the function of each button.
Macro stand
Attaching the supplied macro stand (O-MS2) reduces camera shake during shooting
in (Digital Microscope) or
clips into the slits in upper and lower sides of the LED Macro Lights part. When
attaching and detaching the macro stand, do not hold the clip part.
(1cm-Macro Movie) mode (p.75, p.122). Insert two
* When using the macro stand, the camera may not be able to focus if the objects
have uneven surfaces.
20
Display Indications
AWBWB
1212
M
383838
ISISO
20200
ISO
200
AWB
383838
12
M
36m36m36m36m36m36m
OK
OK
OK
OK
OK
OK
NW35°45’52”3776m
08:24
123°45’52”
04/04/2014
AM
0
°
N
NE
E
SE
S
SW
W
NW
Electronic Compass Display
LCD Off
Normal DisplayHistogram + Info
No Info
Grid Display
Display in A Mode
The display changes in the following sequence each time you press the 4
button: “Normal Display”, “Histogram + Info”, “Electronic Compass Display”, “Grid
Display”, “No Info”, “LCD Off”.
• All the camera buttons function as normal even when the LCD is off. Press
the shutter release button to take pictures as normal.
• The display cannot be changed in some shoo ting modes.
• Only the RICOH WG-4 GPS can displa y the electronic compass. If you ar e
using the RICOH WG-4, the display changes to the Grid Display by
pressing the 4 button at the Histogram + Info display.
1
Getting Started
21
Normal Display/ Histogram + Info/ Grid Display in Still Picture Capture Mode
1 4 : 2 5
ISO
200
AWB
12
M
3 8
+ 1 . 0
1 / 2 5 0
F 3 . 5
36m
0 4 / 0 4 / 2 0 1 4
1 to 22 and A1 appear when “Normal Display” is selected. B1 to B6 appear at the
position of 20 when “Histogram + Info” is selected. Only A1 appears when “Grid
Display” or “No Info” is selected.
1
Getting Started
1
11 12151314
P
2
3
DATE
4
+1.0
5
6
7
+1.
1/25
1/250
F3.5
F3.
8
12
12
9
38
M
AWB
36m
36m
16
IS
ISO
17
20
200
18
19
A1
B5
B6
10
21 22B1 B2 B3 B4
22
Shooting mode (p.67)
1
Battery level indicator (p.36)
2
Face Detection icon (p.99)
3
Date Imprint setting (p.106)
4
EV Compensation (p.95)
5
Shutter speed
6
Aperture
7
Shake Reduction icon (p.97)
8
Memory status (p.41)
9
Remaining image storage capacity
10
Flash Mode (p.83)
11
Drive Mode (p.77 - p.81)
12
Focus Mode (p.84)
13
Eye-Fi communication status (p.181)
14
Height/air pressure
15
(RICOH WG-4 GPS only) (p.189)
Digital zoom/Intelligent Zoom icon (p.64)
16
04/04/2014
04/04/2014
GPS status
17
(RICOH WG-4 GPS only)
GPS log icon
18
(RICOH WG-4 GPS only)
Electronic Level (p.29)
19
Date and time (p.46)
20
World Time setting (p.172)
21
D-Range Setting (p.96)
22
Focus frame (p.61)
A1
Recorded Pixels (p.89)
B1
Quality Level (p.90)
B2
White Balance (p.91)
B3
AE Metering (p.93)
B4
Histogram (p.28)
B5
Sensitivity (p.94)
B6
14:2
14:25
20
* 6 and 7 are only displayed when the shutter release button is pressed half-way.
* For 8, M appears if the shutter release button is pressed halfway when
[Shake Reduction] in the [A Rec. Mode] menu is set to [Sensor Shift] or [Dual].
l appears when [Shake Reduction] is set to [Off].
* For 13, when the focus mode is set to = and the Auto Macro function is
activated, q appears on the display (p.84).
* 14 changes depending on [Eye-Fi] setting in the [W Setting] menu.
* 15 changes depending on [Pressure Sensor] settings in [W Setting] menu.
* 17 changes depending on [GPS] settings in [WSetting] menu.
No icon is displayed on the screen when [GPS On/Off] is set to [Off].
* 18 appears when recording the GPS log.
* 20 disappears for two seconds after the camera is turned on.
* 22 changes depending on [D-Range Setting] settings in the [A Rec. Mode]
menu.
No icon is displayed on the screen when [Highlight Correction] and [Shadow
Correction] are both set to [Off].
* When the shooting mode is b (Auto Picture) and if you press the shutter
release button halfway, the automatically selected shooting mode appears in
A1 even when “No Info” is selected.
* If there are overexposed highlight areas in the image, they will blink red on the
display, and if there are underexposed shadow areas, they will blink yellow.
* Some indications may not appear depending on the shooting mode.
1
Getting Started
23
Electronic Compass Display in Still Picture Capture Mode
NW35°45’52”3776m
08:24
123°45’52”
5
4
1
2
3
6
7
8
04/04/2014
AM
0
°
N
NE
E
SE
S
SW
W
NW
(displayed only on the RICOH WG-4 GPS)
1
Getting Started
GPS latitude
1
GPS longitude
2
Current date
3
Height/air pressure
4
* 4 changes depending on [Pressure Sensor] settings in [W Setting] menu.
* 5 changes depending on [GPS] settings in [W Setting] menu.
No icon is displayed on the screen when [GPS On/Off] is set to [Off].
* 7 changes depending on the current lens direction. Relationship between the
displayed degrees and the lens direction is as follows:
0°
90°When the lens
180°When the lens
270°When the lens
* The normal display appears if you press the shutter release button halfway.
Press the 4 button twice to display the Electronic Compass Display again.
24
When the lens points to the north
points
to the east
points
to the south
points
to the west
GPS status
5
Battery level indicator
6
Lens direction
7
Current time
8
Display in Q Mode
10 0
-
00 38
F 3 . 5
1 / 2 5 0
ISO
200
AWBWB
12
M
Edi t
Edi t
10 0
-
00 38
Edi t
04 /0 4/ 20 14
14 :2 5
10 0
-
00 38
139
35
41 ' 2 9"
N
W
45 ' 5 2"
06 : 25:00
04 /0 4/ '1 4
Edit
32 00
m
ɋ
18 0
70 0
hPa
Normal DisplayInfo 1
No InfoInfo 2
The display shows the shooting information of the image in playback mode. The
display changes in the following sequence each time you press the 4 button:
• The display cannot be changed by pressing the 4 button while playing
back or pausing a movie.
• Only the RICOH WG-4 GPS can display Info 2.
If you are using the RICOH WG-4, the display changes to the normal
display by pressing the 4 button at no info display.
10
003
AWB
100-0038
IS
20
ISO
200
10
100-0038
Edit
Edit04/04/2014
04/04/2014 14:25
003
14:25
OK
1/25
1/250
F3.
F3.5
Edit
Edit
12
M
1
Getting Started
OK
10
003
100-0038
3200
3200
m
hPa
700
hPa
700
180
180
Edit
Edit
04/04/'14
04/04/'14
N
W
139
139
35
35
ɋ
06: 25:00
45' 52"
45' 52"
41' 29"
41' 29"
OK
Edit
Edit
OK
25
Normal Display/ Info 1 in Playback Mode
10 0
-
00 3 8
F 3 . 5
1 / 2 5 0
ISO
200
AWBWB
12
M
Edit
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. In “Normal
Display”, A1 to A10 are displayed. In “Info 1”, B1 to B8 are displayed as well.
1
Getting Started
A1
A2
10
003
100-0038
A3
A4
B1
B2
1/250
1/25
F3.
F3.5
A5
M
Edit
Edit
12
B6B7B8
B5
AWB
IS
ISO
20
200
A6
A7
A8
A9
A10
B3
B4
Face Detection icon (p.99)
A1
Playback mode
A2
Q : Still pictur e (p.125)
K : Movie (p.126)
Battery level indicator (p.36)
A3
Protect icon (p.139)
A4
Four-way controller guide
A5
File number
A6
Folder number (p.175)
A7
Memory status (p.41)
A8
Eye-Fi communication status (p.181)
A9
* A1 appears only if the Face Detection function worked when the image was shot.
* In “Normal Display”, A3 disappears if no operation is performed for two seconds.
* A5 appears even when “No Info” is selected, but disappears if no operation is
performed for two seconds. When no operation is performed for two seconds in
“Normal Display” or “Info 1”, only “Edit” disappears.
* A10 appears only when the volume is being adjusted during playback of movies
(p.126).
* When “Normal Display” is selected, the current date and time appears for two
seconds in the B4 t o B8 positions.
* If there are overexposed highlight areas in the image, they will blink red on the
display, and if there are underexposed shadow areas, they will blink yellow.
Volume icon
A10
Shutter speed
B1
Aperture
B2
Histogram (p.28)
B3
Sensitivity (p.94)
B4
Recorded Pixels (p.89)
B5
Quality Level (p.90)
B6
White Balance (p.91)
B7
AE Metering (p.93)
B8
26
Info 2 in Playback Mode (displayed only on the RICOH WG-4 GPS)
1010 0-00300 3 8100-0038
139 139 139
35
35 35
41' 29" 41' 29" 41' 29"
NNWW 45' 52" 45' 52" 45' 52"
06 : 25:0006: 25:00
04/04/'1404 / 0 4 / ' 1 404/04/'14
EditEditEdit
3200 3200
m
3200
m
ɋɋ
180 180 180
700
700
hPahPa
700
hPa
1
2
3
4
5
8
10
9
6
7
11
12
13
14
15
16
OK
1Face Detection icon9Folder number
2Playback mode10 Memory status
3Battery level indicator11 Height
4Protect icon12 Air pressure
5Four-way controller guide13 Lens direction
6Volume icon14 GPS time
7Eye-Fi communication status15 GPS latitude
8File number16 GPS longitude
* 6 appears only when the volume is bein g adjusted d uring playback of movies (p.126).
* “-” appears at 11 and 12 when [Pressure Sensor] is set to [Off] (p.189).
* (height) appears at 11 and (air pressure) at 12 when [Not underwater]
is selected for [Camera Location] in [Pressure Sensor].
(water depth) appears at 11 and (underwater pressure) at 12 when
[Underwater] is selected for [Camera Location] in [Pressure Sensor] (p.189).
* 13 displays the lens direction during shooting. “0°” is displayed when the lens
pointed to the north at the time of shooting (p.24).
* 14 is displayed in GPS time (the reference time scale of the GPS system). This
may be different from the time you have set on the camera.
1
Getting Started
Guide Display
A guide indicator for each available button or key operation appears as follows on
the display during operation.
A histog ram shows the bright ness
distribution of an image. The
1
horizontal axis represents
Getting Started
brightness (dark at the left and
bright at the right) and the vertical
axis represents the number of
pixels.
The shape of the histogram
before a nd after shoo ting tells you
whether the brightness and
contrast are correct or not, and
lets you decide if you need to use EV compensation and take the picture again.
Setting the Exposure (EV Compensation) 1p.95
Understanding Brightness
If the brightness is correct, the graph peaks in the middle. If the image is
underexposed, the peak is on the left side, and if it is overexposed, the peak is on
the right side.
When the image is underexposed, the part to the left is cut off (dark portions) and
when the image is overexposed, the part to the right is cut off (bright portions).
This camera has a function where overexposed areas are indicated as blinking
red and underexposed areas as blinking yellow.
Understanding Contrast
The graph peaks gradually for images in which contrast is balanced. The graph
peaks on both sides but sinks in the middle for images with a large difference in
contrast and low amounts of mid-level brightness.
28
Loading...
+ 223 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.