Ricoh GelSprinter GX7000 User Manual

Printing to the Ricoh GelSprinter GX7000 using ICC profiles

Contents

2

Installation of Ricoh 7000 v1.2 ICC Profile

3-4

Configuring the Ricoh GelSprinter GX7000 Printer Driver to use the

Sublimation ICC Colour Correction Profile

5-6

Printing to the Ricoh GelSprinter GX7000 Printer using the

Sublimation ICC Colour Correction Profile in Photoshop.

7-8

Printing to the Ricoh GelSprinter GX7000 Printer using the

Sublimation ICC Colour Correction Profile in Corel.

Installation of Ricoh 7000 v1.2 ICC Profile

To install the ICC profile for use on the
Ricoh GelSprinter GX7000 for the Sublijet
R ink, please follow the subsequent
instructions:

1. Browse the CD to locate the ‘Ricoh
7000 v1.2’ located in the ‘Profiles’ folder
and ‘Right Click’ on the icon, and select
‘Install Profile’.

The Profile is now installed on your PC
(Note: no confirmation is shown on
screen). To confirm the profile is installed
‘Right Click’ on the file again, the menu
will show ‘Uninstall Profile’ don’t choose
anything on this menu, just click off
screen to cancel.

Exceptions: Some versions of Windows 95 and 2000 will not show "Install Profile" on the context menu.
If this is the case with your PC, the ICC file will need to be manually copied to your system.

Copy the file

‘R7000 v1.2’ from the CD to:

Win 95,98,98se,ME----- to ----C:/Windows/System/Color
Win NT4----to---- C:/winnt/system32/color
Win 2000---to----C:/winnt/system32/spool/drivers/color
Win XP----to----C:/windows/system32/spool/drivers/color

2

Configuring the Ricoh GelSprinter GX7000 Printer Driver to use the

Sublimation ICC Colour Correction Profile

Go to START—SETTINGS—PRINTERS &
FAXES.

Right click on your GelSprinter GX 7000
printer and choose PRINTING

PREFERENCES.

1

4

5

2

3

On the SETUP tab follow the numbered
sequence shown and configure the driver.

When you click on number 5 it will open the
following screen.

6 7

Change settings 6 and 7 as shown.

The remainder should be as default. Use the
diagram opposite to check the rest of the
settings.

3