Ricoh G900 User Manual
Operating Manual (for Software)
Announcement about the Open Source Software
The information about licenses of each OSS used in the camera is saved in the camera internal
memory as a text file. Connect the camera to a computer after setting [USB Connection] to [CDROM] in the E menu of the camera, and then open the text file in the “oss_license_sw” folder to
read the license terms.
• To ensure safe use, be sure read “Safety Precautions” in the Operating Manual of the camera before using the
software.
• The provided software is compatible with Windows only. Refer to the Operating Manual of the camera for the
detailed operating environment.
Ver.1.1
Contents
Installing the Software ..................................... 3
Provided Software .............................................................3
Operating Environment ...................................................3
Installing the Software .....................................................3
Importing Images ............................................. 4
How to Import Images .....................................................4
Setting up DL-20 Operation ............................................5
Using DL-20 .........................................................................5
Creating Camera Memos .................................. 7
What Is a Camera Memo? ................................................7
Example of the Camera Memo .......................................... 7
Creating a Camera Memo List ........................................7
Setting an Image in the Camera Memo List .................. 9
Transferring a Camera Memo List to the Camera ......9
Browsing Images ............................................. 10
Checking Images ............................................................ 10
Printing Images ...................................................................11
Managing Images ........................................... 12
Setting the Image Management Method ................ 12
Output File Information .................................................... 13
Making Network Settings (G900SE Only) ..... 15
Creating a Communication List...................................15
Transferring the Communication List
to the Camera ................................................................. 18
Transferring Employee Information Files
(G900SE Only) .............................................. 19
Setting Up the Camera Dedicated Server
(G900SE Only) .............................................. 20
2
Installing the Software
Provided Software
The following software is provided with the
camera.
DL-20 Used to import images from the camera to a
computer. (p.5)
LE2 Used to create a camera memo list (.mta).
(p.7)
ME2 Used to view images. You can edit the
camera memo and print the image and
camera memo together on a sheet. (p.10)
EX2 Used to rename image files according to the
options set in the camera memo. (p.12)
ST-20 Used to make the detailed wireless LAN
settings and create a communication list
(.PRM). (p.15)
(G900SE only)
SR-20 Used to set up a computer as a server
dedicated to the camera. (p.20)
(G900SE only)
Installing the Software
Set [USB Connection] to [CD-ROM]
1
in the E menu.
Refer to the Operating Manual of the
camera.
Turn the camera off.
2
Connect the camera to the
3
computer with the USB cable.
Turn the camera on.
4
The installer starts up.
Click [Installing DC Software II].
5
The installer starts up.
Follow the instructions on the screen.
Memo
Operating Environment
The provided software is compatible with
Windows only. The operating environment of
the software is as shown below.
• Windows® 10 (32-bit, 64-bit)
• Windows® 8.1 (32-bit, 64-bit)
• Windows® 7 (32-bit, 64-bit)
• Windows Server® 2019 (64-bit)
• Windows Server® 2016 (64-bit)
• Windows Server® 2012 R2 (64-bit)
• Windows Server® 2008 R2 (64-bit)
• The DL-20, SR-20, and EX2 software are always
resident in the system tray. Double-click the icon
in the system tray at the right end of the taskbar to
launch the software.
3
Importing Images
How to Import Images
The following methods are available to import
images to a computer.
Importing images with File Explorer
Get your computer to recognize the camera as a
device, and select and copy images.
Refer to the Operating Manual of the camera for
details.
Importing images with DL-20
If DL-20 is installed, DL-20 is automatically
launched when the camera is connected. This
manual describes the method to import images
using DL-20.
Caution
• Do not disconnect the USB cable while images are
being imported.
• Do not format the memory card or internal
memory from the computer. Perform formatting
using the camera only.
• Always eject the USB cable in the computer before
disconnecting it.
• If images were imported to the computer using
image management software, etc., they cannot be
displayed on the camera even if they are copied to
a memory card.
• Only one RICOH camera can be connected to a
computer. Do not try to connect more than one
RICOH camera to the computer.
Memo
• When importing images from the camera, insert
a battery with enough capacity remaining to the
camera. The use of an AC adapter (optional) is
recommended.
• If a memory card is inserted, files are imported
from the memory card. If no memory card is
inserted, files are imported from the internal
memory.
4
Setting up DL-20 Operation
Double-click the DL-20 icon in the
1
system tray at the right end of the
computer taskbar.
The DL-20 screen appears.
Click .
2
Set up the import operation.
3
1
2
Click [OK].
4
The screen in Step 2 reappears.
Click [×].
5
Caution
• Set the date and time correctly in the camera. If
the date and time are not set correctly, a folder is
not created with the correct date and time when
[For each date photographed] is selected for
[Create folder] in Step 3. Also, duplicate images
may be saved if a check mark is placed in [Exclude
images that have been imported even once].
Using DL-20
Set [USB Connection] to [MSC] in
1
the E menu of the camera.
Refer to the Operating Manual of the
camera for details.
Turn the camera off.
2
3
4
5
6
1 Place a check mark to automatically import
the images when the camera is connected.
2 When DL-20 is installed, the [Digital Camera]
folder is automatically created in the
[Documents] folder. Click [Browse] to change
the import destination.
3 Select whether to create sub-folders when
importing images.
4 If previously imported images exist in the
camera, select whether to import them again.
5 Software can be registered.
You can launch the registered software by
clicking [Launch User Application] on the
screen in Step 2.
6 Place a check mark to launch the registered
software after importing the images.
Connect the camera to the
3
computer with the USB cable.
Turn the camera on.
4
If a check mark is placed in [Saves
automatically when connected to USB],
proceed to Step 6.
Click [Import Images].
5
The images are imported to the set folder.
5
Click [OK].
6
Caution
• The images captured while [New Folder Options]
is set to [Date] or [Custom] in the E menu of the
camera cannot be imported with DL-20. When the
images cannot be imported, copy them with File
Explorer or other software.
• For the images captured while [File name] is set to
[Custom] in the E menu of the camera, the file
name is changed to “RIMG. JPG” when they
are imported to a computer with DL-20.
6
Creating Camera Memos
What Is a Camera Memo?
If you register information such as shooting
location and work situation in advance, you
can add the work site information to captured
images simply by selecting it during shooting.
This information is called the “camera memo”.
Example of the Camera Memo
Item Name
(Memo Item)
Client Company A, Company B, Company C
Construction
name
Shooting
location
Photographer (Reading barcode, employee ID card,
For images with a camera memo added,
you can print them together with registered
information and change the file names to the
options set in the camera memo in a batch.
This manual explains how to create the camera
memo information (camera memo list) to be
added to images using the provided software
LE2.
Foundation work, Piping work, Interior
finish work
Outdoors, Entrance, Kitchen, Living
room
etc.)
Description (Options)
Creating a Camera Memo List
Launch LE2 on the computer.
1
The LE2 screen appears.
Click [Add] for [Item name].
2
Enter the memo item.
3
Memo
• For how to add camera memos during shooting,
refer to the Operating Manual of the camera.
You can enter up to 20 characters for [Item
name].
Click [Add] for [Description].
4
Enter the option.
5
You can enter up to 128 characters for
[Description].
7
Loading...