Ricoh FT 4422 Service Manual

Technical Bulletin No. RTB-001

SUBJECT: Condor Manual Correction DATE: May 31, ’96

PAGE: 1 of 2

PREPARED BY: M. Ishihara
CHECKED BY:

CLASSIFICATION:

Action Required
Troubleshooting
Retrofit Information

1. Please correct your service manual as follows:

Incorrect Description Correct Description Location
(Duplex Copying) A4/11" x 8

between CN121-7 and CN121-87
becomes too low
Erase Edge mode (Program key
+ "7" + R/# key) or Erase Center
and Edge mo de (Program key +
"8" + R/# key)
If "manual" is selected, copying
stops if the other station does not
have the same paper size.
Erase Center mode (Program
key + "6" + R/# key) or Erase
Center and Edge mode
(Program key + "8" + R/# key)
Refer to 6.5.4 Toner Saver Mode Refer to 5.4 of section 2, Toner

1: No

2: Yes
(115 V machines = 63 V) (110 V machines = 63 V) Page 4-17,

See section 2.1.2 See section 2.1.3 Page 4-22,

1/2"

Revision of service manual
Information only
Other

None
(This machine does not have
duplex mode.)
between CN121-7 and CN121-8
becomes too low
Erase Edge mode (Function key
+ "3" + R/# key) or Erase Center
and Edge mode (Function key +
"5" + R/# key)
If "manual" is selected, copying
stops, even if the other station
has the same paper size.
Erase Center mode (Function
key + "4" + R/# key) or Erase
Center and Edge mode
(Function key + "5" + R/# key)

Saver Mode

0: No

1: Yes

FROM: 1st Field Information Dept. QAC

MODEL: Condor

Page 1-1,
10th row

Page 2-59,
3rd row

Page 4-14,
"Function" column
of SP13 and S P18

Page 4-14,
"Function" column
of SP17

Page 4-15,
"Function" column
of SP26

Page 4-16,
"Function" column
of SP36

Page 4-16,
"Settings" column
of SP38

"Settings" column
of SP48

"Function" column
of SP98 and S P99

Technical Bulletin No. RTB-001

SUBJECT: Condor Manual Correction DATE: May 31, ’96

PAGE: 2 of 2

2. Please add the following step between steps 2 and 3 of the installation procedure
(page 3-5).

[C]

Remove the cleaning blade clamp [C].