Ricoh FT 4422 MODIFICATION BULLETIN

Page 1
MODIFICATION BULLETIN NO. 1 PAGE 1 OF 3
ISSUED ON: July 31, ’96
Model Condor Volt/Hz
Modified Article Parts Catalog
Reason for
Parts Catalog Correction
Modification
Incorrect Part Number Correct Part Number Description Page Index
A1735219 A0485237 A1735221 A1285239 Lens Drive Motor - dc 24V 14.4W 13 11 A1102832 A1102830 Front Side Fence - Paper Guide 21 5 A1731124 A1231127 Development Drive Shaft 27 3
Mirror Drive Motor - dc 24V 9.6W
11 20
Date of
Modification
Serial Number
A1732101 08053471 Bushing - 8x22x7 35 16 A1732103 A1282259 Stepped Screw 35 17
AX440067 AX440093 Fusing Lamp - 220V 780W 41 22
52034179 A1734431 Caution Decal - High Temperature 43 2 A1734415 A1734418 Exit Cover (RIC) 43 3 A1736372 A1736377 Exit Cover (NRG) 43 3 A1731122 A1731126 Development Drive Pulley 45 5
Page 2
MODIFICATION BULLETIN NO. 1 PAGE 2 OF 3
Description Correction
Part Number Incorrect Description Correct Description Page Index No.
A1735035 Main Motor - dc 220V 25W Main Motor - dc 220V 25W - 50Hz 45 27
Not Listed
Part Number Description Q’ty Page Index No.
A1735034 Main Motor - dc 220V 25W - 60Hz 1 45 27
06316140G Parallel Pin - 1.6 x 14 1 45 *107
* New Index
ISSUED ON: July 31, ’96
Page 44
T. Inoue, General Manager 1st Field Information Dept. QAC
Page 3
MODIFICATION BULLETIN NO. 1 PAGE 3 OF 3
ISSUED ON: July 31, ’96
MODEL NAME MODEL CODE V/Hz DESTINATION SERIAL NUMBER
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 A173-19 110/60 Taiwan
Ges 2622S, Rex 8522S,
Nashuatec 3322S
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 A173-28 220/50 Middle East
Ges 2622S A173-50 110/60 Taiwan
RICOH FT4422 A173-79
A173-12 115/60 South America
A173-20
A173-21 220/50 Middle East
220, 230,
240/50
220, 230,
240/50
Asia/Europe
Asia/Europe
Page 4
MODIFICATION BULLETIN NO. 2 PAGE 1 OF 1
ISSUED ON: September 30, ’96
Model Condor Volt/Hz
Modified Article Parts Catalog No serial number cut-in information.
Reason for
Parts Catalog Correction
Modification
Date of
Modification
Serial Number
Incorrect P/N Correct P/N Description Q’ty Used
A173 3185 A173 3585 Lower Cleaning Case
1 1
Inter-
change-
ability
------- 30 37
Parts Catalog
Index No. Page
T. Inoue, General Manager 1st Field Information Dept. QAC
Page 5
MODIFICATION BULLETIN NO. 3 PAGE 1 OF 2
Reissued on: December 31, ’96
ISSUED ON: November 30, ’96
Model Condor Volt/Hz
Modified Article Cleaning Blade
Reason for
To improve cleaning
Modification
Inter-
Old P/N New P/N Description Q’ty Used
A128 3552 A128 3562 Cleaning Blade 1 X/O 26 37
change-
ability
Parts Catalog
Index No. Page
Date of
Modification
To improve cleaning, the cleaning blade has been modified as follows.
1) The length "a" in the drawing has been changed from 10 +0, -0.3mm to 9.5 ±0.3mm.
2) The angle "b" in the drawing has been changed from 70° ±2° to 67.5° +2° -1°.
3) The material of the blade has been changed. This modification is the countermeasure for the vertical and horizontal black line problem.
Serial Number
Bracket
Blade
Drum
T. Inoue, General Manager 1st Field Information Dept. QAC
Page 6
MODIFICATION BULLETIN NO. 3 PAGE 2 OF 2
Reissued on: December 31, ’96
ISSUED ON: November 30, ’96
MODEL NAME V/Hz DESTINATION
CODE SERIAL NUMBER
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 110V/60 Taiwan A173 -19 A3936120001~
Ges 2622S, Rex 8522S,
Nashuatec 3322S
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 220/50 Middle East A173 - 28 A3936110826~
Ges 2622S 110/60 Taiwan A173 - 50 9726120001~
RICOH FT4422 220, 230, 240/50 Asia, Europe A173 -79 A3936110466~
115V/60 South America A173 -12 9696120001~
220, 230, 240/50 Asia, Europe A173 - 20
220/50 Middle East A173 - 21 No production
SINDO PRODUCTION
9706110001~
Page 7
MODIFICATION BULLETIN NO. 4 PAGE 1 OF 2
Reissued on: January 15, ’97
Model Condor Volt/Hz
Modified Article Toner Hopper Ass’y
Reason for
To meet field requirements
Modification
To meet field requirements, the following parts are registered as service parts.
Inter-
Old P/N New P/N Description Q’ty Used
----- A173 3061 Toner Hopper Ass’y - Ricoh 1 ----- 29
----- A173 6380 Toner Hopper Ass’y - NRG 1 ----- 29
change-
ability
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
T. Inoue, General Manager 1st Field Information Dept. QAC
Page 8
MODIFICATION BULLETIN NO. 4 PAGE 2 OF 2 Reissued on: January 15,
’97
MODEL NAME V/Hz DESTINATION
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 110V/60 Taiwan A173 -19
Ges 2622S, Rex 8522S,
Nashuatec 3322S
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 220/50 Middle East A173 - 28
Ges 2622S 110/60 Taiwan A173 - 50
RICOH FT4422 220, 230, 240/50 Asia, Europe A173 -79
115V/60 South America A173 -12
220, 230, 240/50 Asia, Europe A173 - 20
220/50 Middle East A173 - 21
JAPAN PRODUCTION
CODE SERIAL NUMBER
Page 9
MODIFICATION BULLETIN NO. 5 PAGE 1 OF 3
ISSUED ON: December 31, ’96
Model Condor Volt/Hz
Modified Article Mylar - Cleaning Blade Holder
Reason for
To prevent vibrating noise
Modification
Date of
Modification
To prevent vibrating noise from the cleaning blade, mylar - cleaning blade holder has been attached on the cleaning blade holder.
New P/N Description Q’ty Used
A1283559 Mylar - Cleaning Blade Holder
0 2
Inter-
change-
ability
Index No. Page
Parts Catalog
Serial Number
37
Page 10
MODIFICATION BULLETIN NO. 5 PAGE 2 OF 3
DETAILS OF MODIFICATION
The two mylars are attached to the bottom side of the cleaning blade holder as shown below.
ISSUED ON: December 31, ’96
Cleaning Blade Holder
Cleaning Blade Holder
1 ~ 2mm
3 ~ 4mm
Mylar - Cleaning Blade Holder
3 ~ 4mm
1 ~ 2mm
T. Inoue, General Manager 1st Field Information Dept. QAC
Page 11
MODIFICATION BULLETIN NO. 5 PAGE 3 OF 3
ISSUED ON: December 31, ’96
MODEL NAME V/Hz DESTINATION
CODE SERIAL NUMBER
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 110V/60 Taiwan A173 -19 A3935120989~
Ges 2622S, Rex 8522S,
Nashuatec 3322S
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 220/50 Middle East A173 - 28 A3936010951
Ges 2622S 110/60 Taiwan A173 - 50 9726010001~
RICOH FT4422 220, 230, 240/50 Asia, Europe A173 -79 A3935120583~
115V/60 South America A173 -12 9696010001~
220, 230, 240/50 Asia, Europe A173 - 20
220/50 Middle East A173 - 21 9716030001~
SINDO PRODUCTION
9705120001~
Page 12
MODIFICATION BULLETIN NO. 6 PAGE 1 OF 2
ISSUED ON: January 15, ’97
Model Condor Volt/Hz
Modified Article Rear Release Arm
Reason for
To fix the rear release arm to the shaft
Modification
Date of
Modification
To fix the rear release arm to the shaft firmly, the arm has been fixed by a screw.
Inter-
Old P/N New P/N Description Q’ty Used
A173 2758 A173 2759 Rear Release Arm 1 X/O 13 23 A173 2753 A173 2763 Release Shaft 1 X/O 12 23
0720 0060E ----- Retaining Ring - M6
----- 0313 0120W
Philips Pan Head Screw - M3 x 12
1 0 0 1
change-
ability
Index No. Page
Parts Catalog
103 23
Rear Release Arm A173 2759
Serial Number
Release Shaft A173 2763
M3 Hole (added)
Screw - M3 x 12 0313 0120W
Retaining Ring (deleted)
T. Inoue, General Manager 1st Field Information Dept. QAC
Page 13
MODIFICATION BULLETIN NO. 6 PAGE 2 OF 2
ISSUED ON: January 15, ’97
MODEL NAME V/Hz DESTINATION
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 110V/60 Taiwan A173 -19 A3936090001~
Ges 2622S, Rex 8522S,
Nashuatec 3322S
Ges 2622S, Rex 8522S,
Nashuatec 3322S
RICOH FT4422 220/50 Middle East A173 - 28 A3936110826~
Ges 2622S 110/60 Taiwan A173 - 50 9726090001~
RICOH FT4422 220, 230, 240/50 Asia, Europe A173 -79 A3936090141~
115V/60 South America A173 -12 9696090001~
220, 230, 240/50 Asia, Europe A173 - 20
220/50 Middle East A173 - 21 9716090001~
SINDO RICOH PRODUCTION
CODE SERIAL NUMBER
A9706090001~
Page 14
RICOH Modification Bulletin
Model: Condor Date: 28-Feb-97 No: 007 1/1 Modified Article: Parts Catalog Prepared by: M. Ishihara
From: QAC 1st Field Information Dept. Checked by: T. Inoue
Reason for Modification:
Old part New part Description Qty Page Index
number number
A173 5917 - Exposure Lamp - 97V 280W 1 15 16 A173 5916 - Exposure Lamp - 181V 310W 1 15 16
The descriptions for the part numbers A173 5917 and A173 5916 were wrong (exchanged) in the parts catalog. The above descriptions are correct. Machine cut-in serial numbers will not be attached with this MB No.7 due to parts catalog correction.
Parts catalog correction To facilitate assembly Part Standardization
Vendor change To improve reliability Other
To meet standards
( )
Page 15
RICOH Modification Bulletin PAGE: 1/1
Model: Condor Date: 15-May-97
No: 8
Modified Article: Development Unit Prepared by: M.Ishihara From: QAC 1st Field Information Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization
Vendor change To improve reliability Other
To meet standards
( )
Old part New part Description Qty Int Page Index Note
number number
A1733001 Development Unit - Ricoh A1736228 Development Unit - NRG
01 01
31 31
∗ ∗
The above parts have been registered as service parts.
Page 16
RICOH Modification Bulletin PAGE: 1/2
MB Correction
Reissue date: 31-Jul -97 The items in bold italic have been corrected or added.
Model: Condor Date: 15-Jul-97 Modified Article: Parts Catalog Prepared by: T.Matsuno From: QAC 1st Field Information Dept. Reason for Modification:
The part number for the Magnetic Clutch on page 27 of the Parts Catalog was incorrect. Please correct the part number in your Parts Catalog as shown below.
Old part New part Description Qty Int Page Index Note
number number
A1735055 AX200124 Magnetic Clutch 1 X/O 27 18
Parts catalog correction To facilitate assembly Part standardization
Vendor change To improve reliability Other
No: 9
To meet standards
( )
IIIustration
Page 26
11.PAPER FEED SECTION (A173)
AX200124
Page 17
RICOH Modification Bulletin PAGE: 2/2
Model: Condor Date: 15-Jul-97
SINDO RICOH PRODUCTION MODEL NAME V/ Hz DESTINATION CODE SERIAL Ges 2622S, Rex
8522S, Nashuatec 3322S RICOH FT4422 110V/ 60 Taiwan A173 -19 Ges 2622S, Rex 8522S, Nashuatec 3322S Ges 2622S, Rex 8522S, Nashuatec 3322S RICOH FT4422 220/ 50 Middle East A173 - 28 Ges 2622S 110/ 60 Taiwan A173 - 50 RICOH FT4422 220, 230, 240/ 50 Asia, Europe A173 -79
115V/ 60 South America A173 -12
220, 230, 240/ 50 Asia, Europe A173 - 20
220/ 50 Middle East A173 - 21
No: 9
NUMBER
Page 18
RICOH Modification Bulletin PAGE: 1/2
Model: Condor Date: 31-Jul-97 Modified Article: Parts Catalog Prepared by: T.Matsuno From: QAC 1st Field Information Dept. Reason for Modification:
Old part New part Description Qty Int Page Index Note
number number
A1286350 A1736367 Model Name Plate – REX 1 X/O 7 23
The old part above had been registered in the Parts Catalog for the Condor with both a wrong part number and a wrong part description.
Please correct your Parts Catalog in the manner shown above.
Parts catalog correction To facilitate assembly Part standardization
Vendor change To improve reliability Other
No: 10
To meet standards
( )
Illustration
A1736367
Page 6
1.EXTERIOR (A173)
Page 19
RICOH Modification Bulletin PAGE: 2/2
Model: Condor Date: 31-Jul-97
SINDO RICOH PRODUCTION MODEL NAME V/ Hz DESTINATION CODE SERIAL Ges 2622S, Rex
8522S, Nashuatec 3322S RICOH FT4422 110V/ 60 Taiwan A173 -19 Ges 2622S, Rex 8522S, Nashuatec 3322S Ges 2622S, Rex 8522S, Nashuatec 3322S RICOH FT4422 220/ 50 Middle East A173 - 28 Ges 2622S 110/ 60 Taiwan A173 - 50 RICOH FT4422 220, 230, 240/ 50 Asia, Europe A173 -79
115V/ 60 South America A173 -12
220, 230, 240/ 50 Asia, Europe A173 - 20
220/ 50 Middle East A173 - 21
No: 10
NUMBER
Page 20
RICOH Modification Bulletin PAGE: 1/1
Model: Condor Date: 31-Jul-97
No: 11
Modified Article: Parts Catalog Prepared by: T.Matsuno From: QAC 1st Field Information Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization
Vendor change To improve reliability Other
To meet standards
( )
Old part New part Description Qty Int Page Index Note
number number
A0069002 AE044011 Hot Roller Stripper 3 X/O 43 17
Please correct your parts catalog in the manner shown above. Please note the necessary number of pieces for the new part. The present description is “ Hot Roller Stripper (5 pcs/set) ”, but the new part is not a set unit and requires three pieces.
SINDO RICOH PRODUCTION
MODEL NAME V/ Hz DESTINATION CODE SERIAL
NUMBER Ges 2622S, Rex 8522S, Nashuatec 3322S RICOH FT4422 110V/ 60 Taiwan A173 -19 Ges 2622S, Rex 8522S, Nashuatec 3322S Ges 2622S, Rex 8522S, Nashuatec 3322S RICOH FT4422 220/ 50 Middle East A173 - 28 Ges 2622S 110/ 60 Taiwan A173 - 50 RICOH FT4422 220, 230, 240/ 50 Asia, Europe A173 -79
115V/ 60 South America A173 -12
220, 230, 240/ 50 Asia, Europe A173 - 20
220/ 50 Middle East A173 - 21
Page 21
 M
Model:
Condor (TAIWAN ONLY)
odification
B
Date:
ulletin
31-Oct-97
No:
PAGE: 1/1
12
Modified Article: From: Reason for Modification:
Part number #A1735622 for the AC/DC Power Unit for Taiwan has been registered.
QAC Field Information Dept.
Old part New part Description Qty Int Page Index Note
number number
- A1735622 AC/DC Power Unit – 15V (TWN) 1 - 49 9
Parts Catalog
Parts catalog correction To facilitate assembly Part standardization
Vendor change To improve reliability Other
Prepared by:
To meet standards
M.Ishihara
( )
Page 22
 M
)
Model:
Condor
odification
B
Date:
ulletin
31-Oct-97
No:
PAGE: 1/1
13
Modified Article: From: Reason for Modification:
A few machines are noisy when the lens moves. To prevent this, the shape of the lens shutter has been changed. The part A (spring hooker) shown below has been added.
QAC Field Information Dept.
Old part New part Description Qty Int Page Index Note
number number
A0481755 A1731755 Lens Shutter 1 O/O 13 8
Lens Shutter
Parts catalog correction To facilitate assembly Part standardization
Vendor change To improve reliability Other
Prepared by:
To meet standards
M.Ishihara
( )
Lens Shutter (#A1731755
Page 23
 M
Model:
Condor
odification
B
Date:
ulletin
31-Dec-97
No:
PAGE: 1/1
14
Modified Article: From: Reason for Modification:
The previous photointerrupter may be damaged by high temperature. So a new photointerrupter with a higher heat tolerance is now used as an exit sensor.
The previous sensors (AW020075) remain unchanged and are used in the other devices, such as in the options.
QAC Field Information Dept.
Old part New part Description Qty Int Page Index Note
number number
AW020075 AW020086 Photinterrupter 1 O/O 47 2
Exit Sensor
Parts catalog correction To facilitate assembly Part standardization
Vendor change To improve reliability Other
Prepared by:
To meet standards
M.Ishihara
( )
Page 24
 M
Model:
Condor
odification
B
Date:
ulletin
31-Dec-97
No:
PAGE: 1/1
15
Modified Article: From: Reason for Modification:
The previous type of magnetic catch (AG070004) is no longer available in Japan. The new one can be used instead.
QAC Field Information Dept.
Old part New part Description Qty Int Page Index Note
number number
AG070004 AG070009 Magnetic Catch 5 O/O 11,43,4721,9,21
Magnetic Catch
Parts catalog correction To facilitate assembly Part standardization
Vendor change To improve reliability Other
Prepared by:
To meet standards
M.Ishihara
( )
Page 25
 M
Model:
Condor
odification
B
Date:
ulletin
31-Dec-97
No:
PAGE: 1/1
16
Modified Article: From: Reason for Modification:
The part number #A1732852 in the parts catalog is wrong. #A1732854 is the correct part number for the By-pass Feed Unit for Ricoh. #A1732853 is for NRG.
QAC Field Information Dept.
Old part New part Description Qty Int Page Index Note
number number
A1732852 A1732854 By-pass Feed Unit (RIC) 1 X/O 19 1
- A1732853 By-pass Feed Unit (NRG) 1 19 1
By-pass Feed Unit
Parts catalog correction To facilitate assembly Part standardization
Vendor change To improve reliability Other
Prepared by:
To meet standards
M.Ishihara
( )
Loading...